雷竞技电竞平台Dialog Semiconductor客户支持- J-Link https://support.dialog-semiconductor.com/resource-keywords/j-link 在 JLink无法连接DA14583接口板 https://support.dialog-semiconductor.com/forums/post/dialog-smartbond-bluetooth-low-energy-%E2%80%93-tools/cannot-connect-jlink-da14583-interface < div class = "字段field-name-taxonomy-forums field-type-taxonomy-term-reference field-label-above”> < div class = "字段标签" >论坛:,< / div > < div class = "字段条目" > < div class =”field-item甚至“rel = " sioc: has_container " > < a href = " /论坛/ dialog-smartbond-bluetooth-low-energy - % E2 % 80% 93 -工具”“=“sioc:容器sioc:论坛”属性= " rdfs: labelskos: prefLabel”数据类型= " " >对话框Smartbond蓝牙低能量——工具< / > < / div > < / div > < / div > < div class =”字段field-name-body field-type-text-with-summary field-label-hidden”> < div class = "字段条目" > < div class =”field-item甚至“财产=“内容:编码”> < p >你好,< br / >我想计划我的对话框物联网传感器设备使用的接口板(如UM-B-065所述)。我已经将micro USB线缆连接到接口板的CIB端口。我已经将物联网加密狗插入接口板上的J5。跳投接口板的设置为:< br / > * J14到位< br / > * J15到位< br / > * J16到位< br / > * SW2在< br / > *物联网电子狗了< / p > < p >我能建立一个JLink连接使用提供的JLinkGDBServer耐火(版本620 e)。但是GDB在没有连接到CPU的情况下退出(见附件截图)。< br / >我也尝试连接到设备使用JLink指挥官,输出结果是:< / p > < p > <代码> < br / > \耐火\ JLink_V620e> JLink.exe < br / >耐火J-Link指挥官V6.20e(2017年10月6日17:06:21编译)< br / > V6.20e DLL版本,编译后的2017年10月6日17:05:40 < /代码> < / p > < p >通过USB接口连接到J-Link…还好
Firmware: J-Link OB-SAM3U128 V3 compiled Sep 21 2017 14:14:50
Hardware version: V3.00
S/N: 483014369
License(S): RDI
VTref = 3.300V

Type "connect" to establish a target connection， '?
J-Link>connect
请指定设备/核心。
Type '?JTAG (Default)
S) SWD
TIF>
Device position in JTAG chain (IRPre,DRPre): -1，-1 => Auto-detect
JTAGConf>
Specify target interface speed [kHz]. : 4000 kHz
Speed>
Device "DA14583" selected.

Connecting to target via JTAG
Could not measure total IR len. TDO is constant high.
Could not measure total IR len. TDO is constant high.
Could not measure total IR len. TDO is constant high.
Could not measure total IR len. TDO is constant high.
Cannot connect to target.
J-Link>

I don't know how to proceed with flashing my code to the device.
Thanks for any help,

Keywords: 
IOT Jlink
J-Link
DA14583 FLASH
Attachment: 
PDF icon JLinkGDBServer output
Device: 
DA14583
 星期三，2017年10月11日13:44:34 +0000 andreasrenkema 101285年https://support.dialog-semiconductor.com https://support.dialog-semiconductor.com/forums/post/dialog-smartbond-bluetooth-low-energy-%E2%80%93-tools/cannot-connect-jlink-da14583-interface#comments 基本的开发工具包USB串行驱动程序问题 https://support.dialog-semiconductor.com/basic-dev-kit-usb-serial-driver-issue < div class = "字段field-name-taxonomy-forums field-type-taxonomy-term-reference field-label-above”> < div class = "字段标签" >论坛:,< / div > < div class = "字段条目" > < div class =”field-item甚至“rel = " sioc: has_container " > < a href = " /论坛/ dialog-smartbond-bluetooth-low-energy - % E2 % 80% 93 -工具”“=“sioc:容器sioc:论坛”属性= " rdfs: labelskos: prefLabel”数据类型= " " >对话框Smartbond蓝牙低能量——工具< / > < / div > < / div > < / div > < div class =”字段field-name-body field-type-text-with-summary field-label-hidden”> < div class = "字段条目" > < div class =”field-item甚至“财产=“内容:编码”> < p >你好,< / p > < p >我们购买DA14581基本开发工具包,并试图测试的第一个“作品”项目。LED确实闪烁，但在Tera Term上没有打印输出(意味着UART设置不正确)。在PC的设备管理器中，当我插入dev工具包时，会列出以下新设备:LPT):
J-Link CDC UART Port (COM3)
USB控制器下:
J-Link驱动
USB复合设备

我们在Tera Term中使用COM3来监控UART打印输出。PC机上已经安装了J-link驱动和FTDI驱动。你对此有什么建议吗?< / p > < p >谢谢,瀚峰< br / > < / p > < / div > < / div > < / div > < div class =”字段field-name-field-forum-keywords field-type-taxonomy-term-reference field-label-above”> < div class = "字段标签" >关键词:,< / div > < div class = "字段条目" > < div class =”field-item甚至“> < a href = " / resource-keywords / ftdi”“=“skos:概念”属性=“rdfs: label skos: prefLabel”数据类型= " " > FTDI < / > < / div > < div class = " field-item古怪”> < a href = " / resource-keywords / j-link”“=“skos:概念”属性=“rdfs: label skos: prefLabel”数据类型= " " > j-link < / > < / div > < div class =”field-item甚至“> < a href = " / resource-keywords / basic-dev-kit”“=“skos:概念”属性=“rdfs: label skos: prefLabel”数据类型= " " >基本的开发 kit

Device: 
DA14581
 Sun, 2016年1月31日09:09:37 +0000 巨大的 2645年https://support.dialog-semiconductor.com https://support.dialog-semiconductor.com/basic-dev-kit-usb-serial-driver-issue#comments 开发硬件需求 https://support.dialog-semiconductor.com/development-hardware-requirements < div class = "字段field-name-taxonomy-forums field-type-taxonomy-term-reference field-label-above”> < div class = "字段标签" >论坛:,< / div > < div class = "字段条目" > < div class =”field-item甚至“rel = " sioc: has_container " > < a href = " /论坛/ dialog-smartbond-bluetooth-low-energy - % E2 % 80% 93 -工具”“=“sioc:容器sioc:论坛”属性= " rdfs: labelskos: prefLabel”数据类型= " " >对话框Smartbond蓝牙低能量——工具< / > < / div > < / div > < / div > < div class =”字段field-name-body field-type-text-with-summary field-label-hidden”> < div class = "字段条目" > < div class =”field-item甚至“财产=“内容:编码”> < p >你好,< / p > < p > DA14581芯片上我们要开发一些应用程序。雷竞技安卓下载我查阅了几个文档，根据我的理解，在调试和编程过程中需要以下设备:

1。用于通过SW(JTAG)接口编程的J-Link调试器
2。FT2232HL芯片用于USB到UART转换
3。

您能告诉我们这些是最低要求吗?我们是否需要一些其他的设备，或者我们可以去掉上面的一些项目?< / p > < p >谢谢,瀚峰< br / > < / p > < / div > < / div > < / div > < div class =”字段field-name-field-forum-keywords field-type-taxonomy-term-reference field-label-above”> < div class = "字段标签" >关键词:,< / div > < div class = "字段条目" > < div class =”field-item甚至“> < a href = " / resource-keywords /发展”“=”skos:概念”属性= " rdfs: label发展skos: prefLabel”数据类型= " " > < / > < / div > < div class = " field-item古怪”> < a href = " / resource-keywords / j-link”“=“skos:概念”属性=“rdfs: label skos: prefLabel”数据类型= " " > j-link < / > < / div > < div class =”field-item甚至“> < a href = " / resource-keywords / ftdi”“=“skos:概念”属性=“rdfs: label skos: prefLabel”数据类型= " " > FTDI < / > < / div > < div class = " field-item古怪”> < a href = " / resource-keywords / otp”“=“skos:概念”属性=“rdfs: label skos: prefLabel”数据类型= " " > otp < / > < / div > < / div > < / div > < div class =”字段field-name-field-device field-type-taxonomy-term-reference field-label-above”> < div class = "字段标签" >设备:< / div > < div class="field-items">

DA14581
 Sun, 2016年1月31日09:01:03 +0000 巨大的 2644年https://support.dialog-semiconductor.com https://support.dialog-semiconductor.com/development-hardware-requirements#comments 在DA14580 Development Kit - Pro上复位后，J-Link不能停止CPU https://support.dialog-semiconductor.com/j-link-cannot-halt-cpu-after-reset-da14580-development-kit-pro < div class = "字段field-name-taxonomy-forums field-type-taxonomy-term-reference field-label-above”> < div class = "字段标签" >论坛:,< / div > < div class = "字段条目" > < div class =”field-item甚至“rel = " sioc: has_container " > < a href = " /论坛/ dialog-smartbond-bluetooth-low-energy - % E2 % 80% 93 -工具”“=“sioc:容器sioc:论坛”属性= " rdfs: labelskos: prefLabel”数据类型= " " >对话框Smartbond蓝牙低能量——工具< / > < / div > < / div > < / div > < div class =”字段field-name-body field-type-text-with-summary field-label-hidden”> < div class = "字段条目" > < div class =”field-item甚至“财产=“内容:编码”> < p >你好,< / p > < p >我刚收到DA14580开发工具包- Pro(主板+子板QFN40)，并通过用户手册“DA14580/581/583蓝牙智能开发工具包- Pro”PDF进行工作。我能够在Keil uVision5上打开并构建示例项目“blinky”。在我启动调试会话后，程序成功启动。然而，当我做一个重置(以太通过Keil或按钮)，我得到以下日志和程序崩溃。

*** Restricted Version with 32768 Byte Code Size Limit
*** Currently used: 3276 Bytes (9%)

SP = _RDWORD (0x20000000)
$ = _RDWORD (0x20000004)
* JLink Info: Found SWD-DP with ID 0x0BB11477
* JLink Info: Found Cortex-M0 r0p0, Little endian.

< br / > * JLink信息:FPUnit: 4代码(BP)槽和0文字槽< br / > * JLink信息:CoreSight组件:< br / > * JLink信息:ROMTbl 0 @ E00FF000 < br / > * JLink信息:ROMTbl 0 [0]: FFF0F000, CID: B105E00D, PID: 000 bb008 SCS < br / > * JLink信息:ROMTbl 0 [1]: FFF02000, CID: B105E00D, PID: 000 bb00a DWT < br / > * JLink信息:ROMTbl 0 [2]:FFF03000 CID: B105E00D PID: 000 bb00b FPB < br / > * * JLink警告:CPU不能停止< br / > * * * JLink错误:不能读CPU运行时注册15 (R15) < br / > * * * JLink错误:无法读取寄存器16 CPU运行时(XPSR) < br / > * * * JLink错误:无法读取寄存器0 (R0),而CPU运行< br / > * * * JLink错误:不能读寄存器1 CPU运行时(R1) < br / > * * * JLink错误:无法读取寄存器2 CPU运行时(R2) < br / > * * * JLink错误:无法读取寄存器3 CPU运行时(R3) < br / > * * * JLink错误:无法读取寄存器4 CPU运行时(R4) < br / > * * * JLink错误: Can not read register 5 (R5) while CPU is running
***JLink Error: Can not read register 6 (R6) while CPU is running
***JLink Error: Can not read register 7 (R7) while CPU is running
***JLink Error: Can not read register 8 (R8) while CPU is running
***JLink Error: Can not read register 9 (R9) while CPU is running
***JLink Error: Can not read register 10 (R10) while CPU is running
***JLink Error: Can not read register 11 (R11) while CPU is running
***JLink Error: Can not read register 12 (R12) while CPU is running
***JLink Error: Can not read register 13 (R13) while CPU is running
***JLink Error: Can not read register 14 (R14) while CPU is running
***JLink Error: Can not read register 15 (R15) while CPU is running
***JLink Error: Can not read register 16 (XPSR) while CPU is running
***JLink Error: Can not read register 17 (MSP) while CPU is running
***JLink Error: Can not read register 18 (PSP) while CPU is running
***JLink Error: Can not read register 20 (CFBP) while CPU is running

The board is powered over USB and I have already removed R84 of the motherboard according to the User Manual "DA14580/581/583 Bluetooth Smart development Kit – Pro".
Any ideas or solutions?

Regards

Keywords: 
Keil uVision 5
J-Link
Reset
Device: 
DA14580
 Tue, 27 Oct 2015 13:12:11 +0000 dubstepdubstep 2167年https://support.dialog-semiconductor.com https://support.dialog-semiconductor.com/j-link-cannot-halt-cpu-after-reset-da14580-development-kit-pro#comments 不叫ext_wakeup_cb () https://support.dialog-semiconductor.com/extwakeupcb-not-called < div class = "字段field-name-taxonomy-forums field-type-taxonomy-term-reference field-label-above”> < div class = "字段标签" >论坛:,< / div > < div class = "字段条目" > < div class =”field-item甚至“rel = " sioc: has_container " > < a href = " /论坛/ dialog-smartbond-bluetooth-low-energy - % E2 % 80% 93 -软件”“=“sioc:容器sioc:论坛”property="rdfs:label skos:prefLabel" datatype="">Dialog Smartbond Bluetooth Low Energy - Software

我想用你文档中描述的异步方式唤醒我们的应用程序。
我们使用扩展睡眠模式。
在休眠之前，我配置了端口，注册了回调函数并启用了irq。
通过J-Link下载和运行应用程序，一切工作正常。

通过SmartSnippets将相同的应用程序编程到我们的EEPROM，它的行为不同。一切都是一样的，但是回调函数从未被调用。广告时段运作良好。

在阅读了所有关于睡眠模式和醒来的文档后，我不明白为什么它不能工作。

欢迎任何帮助。< br / > < br / >问好阿明< / p > < / div > < / div > < / div > < div class =”字段field-name-field-forum-keywords field-type-taxonomy-term-reference field-label-above”> < div class = "字段标签" >关键词:,< / div > < div class = "字段条目" > < div class =”field-item甚至“> < a href = " / resource-keywords / isr”“=“skos:概念”属性=“rdfs: label skos: prefLabel”数据类型= " " > ISR < / > < / div > < div class = " field-item古怪”> < a href = " / resource-keywords /唤醒”“=“skos:概念”属性=“rdfs: label skos: prefLabel”数据类型= " " >唤醒< / > < / div > < div class =”field-item甚至“> < a href = " / resource-keywords / wkupctregistercallback”“=“skos:概念”属性=“rdfs: label skos: prefLabel” datatype="">wkupct_register_callback

ext_wakeup_enable
Interrupt
J-Link
Device: 
DA14580
 Tue, 13 Oct 2015 10:09:53 +0000 aritec 2112年https://support.dialog-semiconductor.com https://support.dialog-semiconductor.com/extwakeupcb-not-called#comments