Hi. The following webpage is confusing (at least to us):

http://lpccs-docs.dialog-semiconductor.com/UM-140-DA145x-CodeLess/howToUse.html#how-to-use-codeless

Figure 9 with fly-wire is clear and working for us.

Can we use the older main motherboard with the DA14531 Module PCB? The text states the fly wire is required yet Figure 11 does not show any fly wires.

Is the motherboard the same or different version than supplied in the past? That is, we are using our older main boards and have not yet unsealed the new main boards for testing the DA14531 modules.

Figure 11 shows that only jumper changes will allow for the DA14531 module board to be tested?

Also, figure 1 here:

http://lpccs-docs.dialog-semiconductor.com/UM-140-DA145x-CodeLess/introduction.html

shows the driver screen for the FTDI UART. Why is the Segger CDC UART driver being shown here? Believe that this should be the FTDI proprietary driver screen grab? This was another point of confusion (at least for us).

The latest driver package from FTDI is working for the 2 x UARTs on Windows 10 and the use of the CODELESS firmware (that is missing from the downloaded SDK).

Thanks.