嗨Eng-k,是的,你可以this. WHen you configure the device, there is an external thermistor (e.g. 10K NTC) and an external resistor. Combined with the internal comparator thresholds, these set the 'Hot' (and 'Cold') threshold. See page 40 of the datasheet. The Hot threshold is therefore effectively set by external resistor. BR JE_Dialog
嗨Eng-k,是的,你可以this. WHen you configure the device, there is an external thermistor (e.g. 10K NTC) and an external resistor. Combined with the internal comparator thresholds, these set the 'Hot' (and 'Cold') threshold. See page 40 of the datasheet. The Hot threshold is therefore effectively set by external resistor. BR JE_Dialog