对于燃烧flash可以我们e the Smart Snippets tool and also you will have to make sure that the jumpers on the dev kit are in the proper setup, you can have a look at the guide schematic right next to the main header on the pro kit in order to check how to properly place the jumpers. Also with that configuration you should connect via Smart Snippets using JTAG.
Hi martzanida,
对于燃烧flash可以我们e the Smart Snippets tool and also you will have to make sure that the jumpers on the dev kit are in the proper setup, you can have a look at the guide schematic right next to the main header on the pro kit in order to check how to properly place the jumpers. Also with that configuration you should connect via Smart Snippets using JTAG.
Thanks MT_dialog