Hi Dialog,
I was able to boot as test mode(DTM) using Connection Manager.
I would like to boot as test mode using CLI such as prodtest.
Are there any other ways to boot as test mode using prodtest or other tools?
Please let me know ASAP.
Thanks
Keywords:
Device:
Hi Dream Cob,
I dont quite understand what you mean, you can have the device in Direct test mode either via the CLI or the GUI that is implemented on the connection manager tool. The prod_test is just a special fw that can be donwloaded on the 580 (the fw is located in the SDK) and by sending the proper commands over UART it executes the appropriate actions. The commands that you should send to the device via the CLI are documented in the UM-B-008 document.
Thanks MT_dialog
Hello MT_dialog,
Thanks for your reply.
I solved the problem.
Thanks again
Dream Cob