UART issue on Development Kit Pro with CodeLess

Learn MoreFAQsTutorials

4 posts / 0 new
Last post
Fri, 2020-09-18 19:56
#1
kotaromatsukubo
Offline
Last seen:4 weeks 20 min ago
加入:2019-08-31 05:13
UART issue on Development Kit Pro with CodeLess

Hello Dialog,

I'm trying to use the Development Kit Pro (DA14585) with CodeLess firmware. However, I'm facing unexpected UART issue like attached screenshots.

It seems CodeLess firmware is working perfectly as I can control DA14585 from SmartConsole. But I can't control it from a local PC. I put some commands but ack is something wrong. Of course, I changed UART Baud Rate, USB cable, PC & Terminal software many times but It was meaningless.

Could you help me to make it work to use CodeLess command from the local PC?

Thank you.

Attachment:
PDF iconscreenshots & description
Device:
DA14585
Tue, 2020-09-22 10:01
PM_Dialog
Offline
Last seen:1 day 3 hours ago
工作人员
加入:2018-02-08 11:03
Hi kotaromatsukubo,

Hi kotaromatsukubo,

Thanks for your question. We’ll take that question offline from the forum and support you directly.

Thanks, PM_Dialog

Fri, 2020-09-25 04:18
(Reply to #2)
acuratekalex
Offline
Last seen:2 months 2 weeks ago
加入:2020-05-12 03:21
Hi,

Hi,

I have same problem withDA14585 Development Kit-Basic(CodeLess 6.380.12.6).
where can i get help?

Thanks.

星期五,2020-09-25 12:14
PM_Dialog
Offline
Last seen:1 day 3 hours ago
工作人员
加入:2018-02-08 11:03
Hi acuratekalex,

Hi acuratekalex,

Thanks for your post. Could you please raise a new forum post with your issue? Additionally , it would be very helpful to share the jumpers configuration of the Basic DK.

Thanks, PM_Dialog