The "Connection Manager" download link

嗨对话框，

Thanks for your reply,

浏览DA14585的文档页面后，只能找到“AN-B-007 DA1458X蓝牙直接测试模式V1.2（02/04/2017）”。
但是，本文档只能找到使用“Connect Manager”测试，而不是“RF Master”！

是否使用了任何其他文档使用“RF Master”在DA14585上执行DTM模式？
我们需要执行RF PHY测试使用DA14585，

Thanks!

嗨对话框，

I use the RF master and download the "prod_test_585.hex" to DA14580DEVKT + DA14585 ( hereinafter called : DA14585 dev board) from SDK6.0.4 package (Path: DA14585_SDK\6.0.4.326\binaries\da14585\prod_test)

After hex file Download successfully, Some command can be sent to DA14585 dev board
（例如：LE TX / RX，RESET），可以在日志窗口中观看一些日志列表。
(Please refer the "rf-master log" in the attached file)

But, I need to send the "HCI Command" and get "HCI Event" directly to the DA14585 dev board (EX: Reset Command=> 01 03 0C 00).

我尝试使用串行应用程序“串行端口实用程序”发送HCI命令，以直接在DA14585 Dev板上连接COM端口。（在系统中，它检测到两个COM端口，使用波特率115200连接），我尝试了任何一个，但DA14585 DEV板是响应，如异常。（不是标准的HCI事件）
(Please refer the "send_response.txt" in the attached file)

Could you please help me how to send the HCI command directly via serial port(COM Port) on the dev board?

Thanks!

嗨对话框，

我尝试了通过“rf master”的SDK（6.0.4.326和6.0.2.243）的两个版本
（下载prod_test_585.hex并尝试一些hci命令）

The HCI event is no response or responds incorrectly in current version(ver 6.0.4.326) after send the HCI Command in the "RF Master" or send the HCI to serial port directly vi "Serial Port Utility".

（请参阅附加文件da14585_log_compare.zip）

Could you please help me to fix this problem?
（我需要在DA14585上执行2M信号，但旧的SDK版本不支持2M信号。）

Thanks!

嗨对话框，

我知道PROD测试工具不支持所有HCI命令，只能在BLE规格上提供，

But the "HCI_RESET" HCI Command must support all of the bluetooth device define in the bluetooth Core Spec 5.0
(Please refer BLUETOOTH SPECIFICATION Version 5.0 | Vol 2, Part E, Section 7.3.2 Reset Command, Page 904)

The RF master has "Reset" Button can send the HCI_Reset Command to DA14585 DEV Board.

我验证了两个版本的SDK，当前版本（6.0.4.326）SDK中的Prod_Test_585.hex可能无法正常工作。
In the Previous version(6.0.2.243) of SDK, It CAN WORK PROPERLY,
(Please refer the screen capture in attach file of two version. "Rf-master_Reset.zip")

在此版本的SDK（6.0.4.326）中，它无法正常响应HCI事件。

您能帮我查看此版本（6.0.4.326）的“Prod Test Tool”有任何问题吗？

或者，套餐中版本（6.0.4.326）的“prod_test_585.hex”是损坏的？
您能否向我提供通常的“prod_test_585.hex”吗？

Thanks!

嗨对话框，

According to the Dialog website,
我无法在网站上找到一个新的585硅发布

我上周买了这个DA14585开发板。

== < Please refer DA14585 PCB as capture as attach file. > ==

The printed word on the chip is (DA14585 AB000 1703NCAB)
Label on the back side of the board (DA14585-01ATDB-P 1711_00076)

您能否请帮助我查看此DA14585是新的或较旧的585硅，
If this is an older, Please help to how to get a new version 585 silicon.

Or, If this is a current version.
Please provide a normally "prod_test_585.hex" to me?

Thanks

嗨对话框，

由于我们重新工作了DA14585女儿板
(We had added the SMA Connector on the board)
And, I bought this DA14585 Development Kit-Pro (DA14585-00ATDEVKT-P) from Mouser via oversea shipping.

现在，我有一个主板，DA14585女儿板与旧硅，
So, We plan to reorder DA14585 daughter board Only (New Silicon),
你能帮我检查以下项目吗:

1.检查DA14585女儿板是否已在线商店列出的“新芯片”？

2. Where to buy the DA14585 daughter board (new silicon) Only on the online store? A what is the model name?
（该对话框仅提供“DA14585开发Kit-Pro”链接）

3. Every version of the SDK update, The old version devices(older silicon, "in this case") is always dropped?

我非常担心订购一个新的DA14585女儿板，下一个版本的SDK已经删除了这款版本的硅子。

Thanks for your support and reply!

嗨对话框，

Will I need prepare the some contact info to the Dialog Taiwan?
What do I have to do next?

感谢您的帮助。

嗨对话框，

So far, I have not received any information from the Dialog Taiwan team,
Could you please help me to check?

Thanks!