DA1469x Sleep Mode Implementation - Needed Example

Hi Zinal,

I would recommend you first checking theDA1469x Power Consumption TutorialandDA1469x Wake up controllerSW Example from the DA1469x support page.

NOTE : Changing the device selection from DA14580 to DA1469x in the initial post.

谢谢，PM_Dialog

Hi Zinal,

请查看pm_sleep_mode_set（）API。应使用此功能，以便将设备设置为所需的睡眠模式。您想停止广告并将其放在永久睡眠模式中吗？如果设备是广告的，则将在除法间隔之间进入睡眠模式。所有SDK BLE示例都将设备配置为扩展睡眠模式。

谢谢，PM_Dialog

Hi Zinal,

TheDA1469x Wake up controllerSW example is demonstrating similar functionality. Which SDK project are you using? Does the device advertise? If yes, you will have to stop adverting and put it in sleep mode. Please keep in mid that the device can go into sleep mode between advertising or connection intervals and wakes up automatically by the BLE timer.

谢谢，PM_Dialog

Hi Zinal,

If you are interested in testing the sleep mode, I would recommend using the SDK examples.

The ble_gap_adv_stop() should be used in order to stop advertising. If advertising is successfully stopped, the application will receive a BLE_EVT_GAP_ADV_COMPLETED with status set to BLE_ERROR_CANCELED. So, you should setup a timer and stop advertising after a predefined amount of time.

Please refer to ble_adv example of the SDK and see how the BLE_EVT_GAP_CONNECTED and handle_evt_gap_connected are handled in the for(;;) loop. You should do the same for the BLE_EVT_GAP_ADV_COMPLETED.

静态void handle_evt_gap_adv_Completed（ble_evt_gap_adv_completed_t * evt）{pm_sleep_mode_set（pm_mode_extended_sleep）;}案例ble_evt_gap_adv_completed：handle_evt_gap_adc_completed（（ble_evt_gap_pair_req_t *）HDR）;休息;

谢谢，PM_Dialog

Hi Zinal,

I am trying to say that in order to go into hibernation or deep sleep you should not have any BLE activity, so you should stop advertising and configure the device into sleep mode. If there pending interrupts, then the system will fail to hibernate. ‘

I have explained you how to stop advertising and then put the system into hibernation.

Please try to stop advertising in the ble_adv example, and configure it into sleep mode.

> > >以及如何验证它在睡眠模式?

You should have to measure the current consumption.

Please check the following exampels :

DA1469x Power Consumption Central

DA1469x Power Consumption Peripheral

DA1469x Power Consumption Tutorial

谢谢，PM_Dialog