软件e problems for Jtag and JLINK

⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.wsdof.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.

2 posts / 0 new

Last post

Sat, 2019-09-21 07:35

zhehanc

Offline

Last seen:1 year 6 months ago

加入:2019-05-03 07:47

软件e problems for Jtag and JLINK

In our project , we used keil to create our codes for the development kit of DA14580. It can download the codes to Jlink as well. But in our PCB board, we used JTAG ICE, ATMEGA16. The software we have for download code to this JTAG is AVR studio. Then we cannot use AVR studio to open the project file of our codes written in the software of keil.

So that we cannot download the code we write to our PCB board. I am wondering that whether someone else faced the simialr problem before, and whether there are some software that can download the code to JTAG ICE, ATMEGA16, as well as open the file written in the software of Keil

Device:

DA14580

Mon, 2019-09-23 17:16

PM_Dialog

Offline

Last seen:38 min 19 sec ago

加入:2018-02-08 11:03

Hi zhehanc,

All the available SDK and SW example for DA1458x products are based on Keil IDE.

Thanks, PM_Dialog