AN-B-035 says the SDK Charging Toolbox supports batteries with a capacity of 20 mAh to 500 mAh. Does the DA1468x support charging smaller batteries (e.g. 10 mAh)? If so how would we configure the charger? Thanks.
Device:
⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.wsdof.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.wsdof.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.
嗨mg_gti,
Whatever the size of battery capacity,the currents value in the range of 10 – 400mA can be used to charge the battery.There are no issues using 10 mAh battery. Charging current is normally 100 % of battery capacity.Setting a value higher than 100% may be harmful and should be only done after consulting the battery manufacturer. The SDK will not allow the user to enter a value that exceeds 150 % of battery capacity.
Please check
in Datasheet.
Thanks
STS_Dialog.