Porting IoT Sensor code to IoT Multi Sensor

⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.wsdof.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.

2 posts / 0 new

Last post

Thu, 2018-12-20 09:15

ImagineSam

Offline

Last seen:10 months 1 week ago

加入:2017-06-08 09:00

Porting IoT Sensor code to IoT Multi Sensor

We have a project that we have thoroughly tested on the IoT device and we would like to port it over to the IoT Multi Sensor device for power consumption reasons. We have a couple of questions before we purchase the new device

* Can the code be ported over easily with minor changes? Will we have any obstacles?
* Is the battery life better with the IoT Multi Sensor? We use the BLE stack as well as the accelerometer and gyro

Thanks!
Sam

Device:

DA14580

Mon, 2018-12-24 02:50

MHv_Dialog

Offline

Last seen:2 months 2 weeks ago

加入:2013-12-06 15:10

The DA14583 based IoT Sensor

The DA14583 based IoT Sensor sleep current is 4uA lower than that of the DA14585 based IoT Multi Sensor so you will not see any savings.

/MHv