⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.wsdof.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.
2 posts / 0 new
Last post
afkiwers
Offline
Last seen:2 years 6 months ago
加入:2018-02-22 09:20
Erasing the EEPROM stops at 0x80

Hello,

I have the problem that I cannot erase the EEPROM completely. I connect via JTAG and use the EEPROM programmer. If I erase everything with 0x00 then the fields 0x00 to 0x80 are 0x00. However, from 0x80 to 0x100 the field are still 0xFF. this pattern is repeating itself.

As EEPROM I use the 24LC512 from Microchip with 512 kbit.

Keywords:
附件:
Device:
PM_Dialog
Offline
Last seen:19 hours 16 min ago
工作人员
加入:2018-02-08 11:03
Hi afkiwers,

Hi afkiwers,

Please check the DA14580 flash_programmer located in the SDK directory (DA1458x_SDK\5.0.4\utilities\flash_programmer).You will see that the 24LC512 EEPROM is not supported. If you want to use this EEPROM, you should add its characteristics into the user_periph_setup.h header file of the flash_programmer project.

Thanks, PM_Dialog