I just registered for an account but I am unable to download the document "DA14585-DA14531 Codeless AT Command set 6.380.12.6". Please advise.
Hi:
I want to download ble_adv Demo to DA14695-00HQDEVKT-U with SmartSnippets Studio v2.0.14.
Project has built correctly,But when I use Run > External Tools > program_qspi_jtag ,
There was erro about:
Hello,
I am Trying To program DA14580 DEVKT -B on UBUNTU 20.04 . I am following your documentation on Getting Started With Devlopment kit. I am Stuck . The SDK 5.0.4 which I have Downloaded from your site is not showing Eclipse Tools On SmartSnippets Studio . If i change SDK5.0.4 to SDK 5.0.3 , I am Getting Eclipse option On Smartsnippets Studio . But configure file is absent in SDK 5.0.3.
So I kindly Request you to help me in resolving my problem.
Thanks.
HI 您好:
目前在使用上遇到一些問題
設備 :
DA1469x PRO kit + DA14699 daughterboard
SDK : SDK_10.0.10.118
smartsnippetsstudio2.0.14.1748
smartsnippets Toolbox v5.0.14.3080
目前在使用emwin的 LCD code ,有許多PNG要放置在DA14699 與 FLASH中 , Flash => MX25U3235F-M2I-10G 32M
但是後續還會使用藍芽傳輸png影像,放置於DA14699 中,這樣空間肯定會不足,目前考慮更換為 AT25SL128A (同時有程式需要資料也有lcd影像資料,後續也會開啟suota功能)
目前遇到一些狀況想請教一下:
1. DA14699 daughterboard 的 flash 是否可以規劃部分區域放置資料 ?
2. 還是說有其他的方式來存放png檔比較好? 影像資料大小不會超過10MB
Hi 大家好！
我们现在用的是一个固定频率的Non Connectable Advertise广播（参考Simple beacon例程），但是我们想连续广播两包数据，数据内容不同，每包数据31字节。请问有没有实现方法？
谢谢！
Check out a new app note below that describes the High Voltage GreenPAK IC configurated as a LED driver with brightness and color temperature control:
Check out a new app note below that illustrates how to use the SLG47004 to implement an adjustable analog filter and describes different ways to adjust the filter`s cutoff frequency:
Check out a new app note below that describes the implementation of a simple tracking ADC based on digital rheostats of the SLG47004. No external components and no special tuning procedure are required for the proposed ADC structure. Also, the circuit has much better PSRR and temperature drift than a capacitor based counter type ADC. The proposed ADC can be used for monitoring slow-changing signals like temperature, battery voltage, and others:
Check out a new app note below that describes the design procedure for Wheatstone bridge sensors. A unique AutoTrim feature of the SLG47004 is used to achieve the best precision of this analog interface. The application note contains a complete schematic of an analog front-end for a low-cost pressure sensor:
Check out a new app note below that describes the design procedure of an analog front end for a heart rate monitor. The circuit utilizes a commonly used technique of measuring the green light reflected from skin. A unique Auto-Trim feature of the SLG47004 allows achieving stable circuit operation in various conditions. The application note also contains test results of a hardware prototype: