DA1469x

DA14695-USB

Fri, 2019-04-26 11:40--jwyoungster
Forums:
Dialog Smartbond Bluetooth Low Energy – Tools

Using SSS v2.0.07

SDK 10.0.4.66

was able to load/compile/modify pxp reporter demo , debug using RAM and get the usb kit doing things.

tried to flash it with the .bin file created. (i.e. run it standalone)...used the cli-programmer and J Link 6.44 GDB (i.e. command prompt style)

didnt do anything (i.e. not running).

went back into sdk to try and debug...

while debugging get all sorts of errors...(see attachments).

re-flashed the usb with the factory fw.bin...the usb runs standalone no problems.

DA14695 Development Kit – USB

Tue, 2019-04-16 17:05--jwyoungster
Forums:
Dialog Smartbond Bluetooth Low Energy – Tools

Just got one of these kits after attending a n event at Avnet, North Reading , MA.

Are there any "canned software" apps specifically geared towrds this board? i.e for a real beginer...jsut to go in , tweek a few things, see how to compe, etc.?

I downloaded all the SDK/SS, etc...I can compile the demo projects in the SDK ( there...ble_multi-lin, pcp_reporter, etc).

Possibly the source code for the "factory default" program loded on the part?

again, super beginer here. If I could flash the led in a manner I dicate by editing some code would be helpful.

DA1469x support wireless charging?

Wed, 2019-04-03 21:49--dmyers
Forums:
Dialog Smartbond Bluetooth Low Energy – Hardware (device & reference designs)

Hello, I'm looking at product line for DA1469x and want to know if it's possible to interface the built-in battery charger with a wireless power receiver's rectified (5V) output. Since the charging seems to be based on USB VBUS, could the rectified output just be connected to the VBUS line? Assume USB charging isn't a requirement in this use case.

What devices should i buy if i want to measure AOA using Bluetooth 5.1

Sun, 2019-03-10 14:14--Baichuan
Forums:
Dialog Smartbond Bluetooth Low Energy – Hardware (device & reference designs)

What devices should i buy if i want to measure AOA using Bluetooth 5.1?
I can but the DA14695 Development Kit – Pro(//www.wsdof.com/products/da14695-development-kit-pro).
But where can i get access to the board of Antenna as in the left of PICTURE.PDF ?
And the board in the right of PICTURE.PDF is DA14695 Development Kit – USB.

DA1469x for EEG application?

Sat, 2019-03-02 07:50--toshiyo
Forums:
Dialog Smartbond Bluetooth Low Energy – Hardware (device & reference designs)

Hello All,

I am hoping to use the DA 14695 for a school project to measure EEG waves. A couple questions I had:

1. Is it possible to connect the DA 14695 to an external amplifier like the AD620 (datasheet attached)?

2. How can I interface the electrodes with the GPIO pins?

Thank you so much for your help!

Pages

Subscribe to RSS - DA1469x