BLE_Central example from the SDK
Hello Dialog,
GATT connection timeout in DA1469x_Custom_ble_service_sample_code
Hello Dialog,
I am able to run the Custom_ble_service example. But, when I am trying to read or write data through the nrf connect app, I am getting the GATT connection time out error with in some milliseconds of time which makes me to reset the USB board again to make the connection. Could you suugest me where can I adjust the time?
Also, If I wanted to test this application with two USB DA14695 boards, How can I modify the properties of the characteristics in the ble_peripheral and the ble_central examples to read and write between them through UART?
无法编译WIRA应用程序
尝试构建BLE_RANGE_DTE应用程序时，我会收到一些链接错误。错误是“无法找到-lble_stack_da1469x”，也是未生成的内存加载文件（mem.ld，sections .ld）请告知。
Peripheral initialization
I need to connect an external sensor to the DA14695 WiRa USB development kit via I2C. The driver looks fairly straightforward but I have a question about initializing the interface. The code uses an assembler directive to create a list of init functions to call (bus_init_section) but how do I add the initialization of the I2C bus to this list? As a more general question, what is the methodology for adding peripheral support using this mechanism?
SDT application not logging
I am trying to get the SDT example application running with the DA14695-00HQDEVKT-RANG development kit. This the USB version of the kit, and I have programmed both units with the SDT firmware. Both are running and both are advertising with the correct UUID, but logging never starts. I am not using a Raspberry Pi but instead am attempting to show the zone report on the LCD display. The code never reaches the line 2320 in distance_sw_fsm.c where the logging occurs, it appears because the logging task notification is never received and the OS_TASK_NOTIFY_WAIT continues to block.
QSPI FLASH 14699
HI 您好:
目前在使用上遇到一些問題
設備 :DA1469x?PRO kit + DA14699 daughterboard
SDK :SDK_10.0.8.105
smartsnippetsstudio2.0.14.1748
smartsnippets Toolbox v5.0.14.3080
目前遇到一些狀況想請教一下:
移植FLASH mx25u3235 改為 at25sl128a
有參考DA1469x Adesto AT25SL128A Flash driver
QSPI燒入時也有設定
Product ID: DA1469x-00
Flash: Adesto AT25SL128A
active_image_address: 0x2000
update_image_address: 0x2000
可以DA14695并行LCD接口支持RGB565/RGB666/RGB888?
Hi Dialog,
There is only 6 color bit output lines on DA14695. Can DA14695 Parallel LCD Interfaces support RGB565/RGB666/RGB888? Such as RGB666 , if DA14695 can support it , is that means it will cost 3 time LCD clock time to transmit one pixel data?
How to use DA14695 RGB interface?
Hi , dialog
We want to use DA14695 RGB interface. But we don't know what exactly RGB pin connection. Such as NHD43480272EFASXN LCD module , which driver IC is ST7282T2 , I guess we should use its Serial 8-bit RGB interface according to its datasheet. But , how 8-bit RGB interface(G0-G7) is connected to DA14695 G0,G1,B0, B1, R0, R1? The hardware platform is DA14695 Development Kit-pro.
Broadcast Isochronous Groups and Streams
Hi Dialog,
My company is currently working on a product based on the da1469x. For us the new BLE 5.2 feature of Broadcast Isochronous Groups and Streams will be important in the future. Could you give us any update on the roadmap for that?
More specifically: do you expect it to be added to the da1469x SDK in the future, or will it be supported only by newer hardware? In the latter case, do you expect migrating a design from the da1469x to the new IC will be straightforward, or is it an entirely different design (i.e. no more FreeRTOS, etc).
DA1469x Sleep Mode Implementation - Needed Example
Hello Dialog,
i want to implement sleep mode for DA1469x depends upon the sensors outputs. can you suggest me any example for sleep mode and wakeup ??
Thanks,
Zinal.
Pages
