开发板：DA14695 Development Kit – Pro
编译工具：SmartSnippets Studio v2.0.12.1622
demo：da1469x_emwin_demo
LCD屏：t1d54bp002 （240*240 st7789V2）
打开SDK，直接编译工程，显示如下错误：d:/diasemi/smartsnippetsstudio2.0.12/gcc/7-2018-q2/bin/../lib/gcc/arm-none-eabi/7.3.1/../../../../arm-none-eabi/bin/ld.exe: invalid length for memory region ROM
请问该如何设置工程，才能编译成功？
Dear Dialog Semiconductor Staffs,
Is there any SUCCESSFUL case on achieving data rates higher than 1Mbps between two DA1469x chips using Bluetooth5?
One of our pre-design products needs data rates over 1Mbps, i'm not sure if DA1469x will meet our demands.
Other futures of DA1469x seems all right.
Looking forward to your reply with grateful thanks.
Sincerely,
Zhang
Hi, teams.
I have applied SUOTA by the reference manual, and it works well when I am using firmware smaller than 512KB.
Because my firmware becomes bigger, I followed guideline inhttps://lpccs-docs.dialog-semiconductor.com/tutorial_da1469x_supporting_fw_images_bigger_than_512kb/index.html, and check it work when I write via JTAG.
Hi there,
We used the DA14695 chip for the project. The current power consumption of the chip is 6-7mA. I also call the function pm_sleep_mode_set (pm_mode_extended_sleep). How can I get the chip into low power consumption?
Hi there,
I use DA14695 ProDev kit + DA14695 daughterboard + SDK10.0.8.105.
Today I faced with strange problem. I erased some data in flash (MX25U323F), but after that I can`t load any firmware to it.
I just tried to erase my custom partition withToolbox 5.12, but not select size of block to erase. I assume that some of next mandatory partitions was erased too. This partitions was NVMS_PARAM and partition table.
Can it be reason for that problem?
How can I fix it? Why I can`t load firmware in flash?
Thanks in advance!
Hello,
Can the DA14695-00HQDB-P Daughterboard for DA14695 be programmed without the motherboard?
Hi there,
I want to use unsupported QSPI memory chip (Adesto AT25QL641). How can I do it?
I assume that I need to write new flash driver, it is ok. As I know, tht memory ship differs from supported variants only by FastWrite (QSPI Write) command (another command code).
Does the bootloader of DA14695 supported that memory chip?
Thanks in advance!
Hi,
I want to kown about Max Transmission Speed for DA1469x for yours test data?
I hane two demo boards(DA14695-00HQDEVKT-U,DA14695-00HQDEVKT-P), and I have try by SDK_10.0.6.90 demo,I can get about 400kbit/ps.
I want to get about 1.3Mb/ps,what can I do for this?
Can you provide some suggestions，if you have software demos is best.
Thanks for your regards!
Hi support!
I use DA14695 daughterboard + ProDK + SDK 10.0.8.105 for my tests.
I need to use clocks generated by LCD controller without any connected display. Is it possible?
I can`t find any LCDC examples. Is there any example for LCD controller usage? Can you give it to me, please?
Thanks in advance!
hi there,
I use the routines in the SDK_10.0.8.105 \ projects \ dk_apps \ demos \ pxp_reporter directory to upgrade. But the program cannot run after the upgrade. I use the mobile application Dialog SUOTA to operate. The routine does not modify any code. Please give me some hints.
