Hi Dialog,
Is it possible that I turn on the 14583 without the wireless part and only to talk with SPI with sensors in purpose to saving more energy each 5s. I will do some broadcasting and reset the role and turn on the broadcasting mode each 50s also.
which role should I setup when I wakeup from the sleeping?
Do I need to reset the whole stack when I each time switch from the SPI mode only to the broadcasting mode ?
Hello Dialog,
I'm using SmartSnippets v3.9 in order to flash the chip. Using the SPI Flash Programmer I am able to connect and read 32KB from the flash, but I cannot burn or erase anything. I get the error "Memory burning failed". After this, if I try to read I get "Failed reading memory", until I connect again to the chip. So I guess I'm losing the connection somehow when I'm trying to burn...?
The hex file I'm trying to download is fine. When I'm using uVision I can enter debug mode on this chip and everything works well.
Hi Dialog,
我试图定义扫描功能the package over the air, I have checked the document and made my function as the following. My question, where and how should I degine my White List for the scanning?
Hi all,
Please let me ask the question about the usage for “Retention RAM” and “SysRAM(page0,1)”.
We are struggling to shrink code size. (RAM area (for code) is smaller than our thoughts… )
I’ve read the UM-B-011 document, but still I can’t have a confidence to use those area.
=My condition=
- Use Extended Sleep
- BLE_CONNECTION_MAX_USER = 1
Hi,
Please let me ask the questions about the Advanced Boot loader and usage of SRAM related things on DA14583.
We would like to create the Advanced Boot loader for DA14583. I’ve already read “UM-B-012” but I would like to comfirm these related things.
My target is to make a point to point connection between 2 DA14583 EVB with pin code for security, a client sends battery level and particular ID to the host periodically. Please kindly advise which profile/service template I should use as my starting point.
Are there plans to add optional Write support to the 'Current Time' characteristic as per the "Current Time Service" v1.1.0 revision.
Thanks.
For the project "ble_app_barebone", I have changed the watchdog from "#undef CFG_WDOG" into "#define CFG_WDOG" in the "da1458x_config_basic.h". Then I write the following code into "app_task.c", then I find after it running for a while, the program stops. It looks like the watchdog is not running. Could you please help? Thank you very much again.
Hello!
Hi Dialog,
I am trying to make the adverstiement like beacon application for the other Bluetooth device can listen on the air, the issue that I following the guy of the link from your website, but still can not catch the packet for the broadcasting from other bluetooth device by scanning the broadcasting package. Could you please help?
