Hello
我正在指导客户与主板和Soket板一起使用智能帆布程序。
When we try to save “abc.ini”, it is successful.
I am facing a problem when I use open, the file cannot be found by smart canvas although we are looking at the right directory.
When using window explorer, the file can be seen
如果我们重命名扩展. ini的文件时,智能canvas will not open as well
Is there something we are doing wrong?
INg
We are ramping up production of a new board, when we notice that some units advertise on the wrong frequency!
Most boards advertise correctly on channels 37, 38 & 39 and seems to have full function
But some boards can not be detected when scanning, not even with high end bluetooth analyzer. Spectrum analyzer reveals that RF output
energy is present only at 2460Mhz and 2480Mhz, which is not correct.
Hi
will oscillators connected to da14580 soc works, when there is no program loaded.
what is in the da14580 soc by default, means before loading any program.
Regards
Hi,
I have the DA14580 development board and I'm trying to run the "blinky" test app with Keil MDK.
I facing below error 122 in Command window :
Running with Code Size Limit: 32K
Set JLink Project File to "C:\Users\ALMA1090004\Documents\SDK 5.0.4\SDK 5.0.4_DEVKT-Pro\SDK 5.0.4\DA1458x_SDK_5.0.4\DA1458x_SDK\5.0.4\projects\target_apps\peripheral_examples\blinky\Keil_5\JLinkSettings.ini"* JLink Info: Device "CORTEX-M0" selected.
我想知道我可以在哪里购买，租赁或窃取DA9062程序员板，232-18-A，如DA9061 / 2/3的电路编程指南中所讨论的？我已经看到了DA9061_2_3 ICP套件在Avnet上出售，但我不知道该套件中的内容，我找不到有关它的任何文档。任何帮助将不胜感激！
Hi
we have developed custom board based on DA14580 and trying to connect to smartsnippets studio with the following pin configuration on development kit pro
VPP -> pin 1 on custom board (tried with not connected too)
GND -> pin 2 on custom board
SWDIO -> pin 25 on custom board
SWCLK -> pin 27 on custom board
custom board is connected to the computer USB.
Regards
您好，很久没来论坛了。从14年到现在一直用DA14580在做产品。之前用的SDK3所以一直都没什么问题。
现在公司的新产品打算用SDK5，我参考《Dialog SDK 5.0.3 培训材料2自定义协议》文件并使用了SDK5.0.4下的ble_app_all_in_one这个project来进行试验。
添加新的特征值之后，运行起来的设备能被手机上的工具软件扫描并且能和手机上的工具软件进行连接。
我发现当我用手机上的蓝牙工具对自定义的特征进行写入数据时，并没有回调对应的gattc_write_cmd_ind_handler（...）函数，我记得在SDK3上是会回调
gattc_write_cmd_ind_handler（...）的。请问ble_app_all_in_one这个project能实现对特征值进行操作吗？写入数据是会调用哪个回调函数？
节日快乐：
我公司开发基于DA1458X DSPS的应用，用的是自己的版，但是代码基于官方DSPS。从主处理器能通过UART发送并启动DA14580的程序，但是之后通过同样的UART串口（115200波特率）发送一个包，调试器并没有跳到__wrap_UART_Handler函数里。UART初始化和GPIO设定与官方DSPS一致，除了调试时睡眠模式是关闭的。暂停调试器发现正在无限运行以下反汇编：
0x00028158 6B00 LDR r0, [r0, #0x30]
0x0002815A 4700 BX r0
0x0002815C B510 PUSH {r4,lr}SystemInit
0x0002815E 4822 LDR r0,[pc,#136] ; @0x000281E8
0x00028160 6881 LDR R1，[R0，＃0x08]
0x00028162 0709 LSLS r1,r1,#28]
0x00028164 0F09 LSRS r1,r1,#28main
0x00028166 2901 CMP r1,#0x0184] ; @0x20003A80
0x00028168 D01A BEQ 0x000281A0
Hi，DA工作人员您好，我在网站https：//www.dialog-seminile.com/produ雷电竞官网登录cts/connectivity/bluetooth-low ...看到DA有现成的设计，请问哪里可以购买参考设计，同时获取到网页中列出的下列文件呢：
- 智能标签
- Schematics, BOM, lay out info
- User manual
- 测试报告
- Source code
- SmartTags app source code
谢谢！
Hi, I am going to build my own smarttag device based on DA14580. I just read [ UM-B-018 User Manual DA14580 SmartTag Reference Application ]. I am very interested in this reference application. Where can I get the full reference documents, such as UM-B-014, UM-B-015 etc, and the source code of the Reference design? Thanks.
Qinfei
