Hello,
STM32F4 <-----UART-----> DA14580 <-----BLE(DSPS)----> Android
I want to connect between DA14580 and STM32F4 via UART. Let DA14580 read data from STM32F4
Then, from STM32F4 can send data to the phone.
How to transmit data from DA and STM32F4 by UART?
Help me.
hi, i have a project: A box with a DA14580 kit on it, the kit can count how may time i opened the box and when did i do it. Then the kit wil send the data to an android phone via BLE. Where should i begin? Are there examples about it in the web site. Thanks!
Hello
I know supply current at VBAT 3 V: TX: 3.4 mA, RX: 3.7 mA .
Please tell me that how much the current in connected status?
10Hz broadcast mode,how much the current?
Check out the app note below to look into a simple hardware implementation of a 4-Mux LCD driver using time division multiplexing techniques along with system monitoring:
Hello,
I have been using the GreenPAK DIP development platform with SLG46537V-DIP and SLG46867M-DIP, accessing the IC with I2C (reading and writing) from an 8 bit uc without issue.
Then with exactly the same setup, I changed to use a SLG46826V-DIP. After turning on emulation mode, any attempt to use the I2C bus results in the error below
"Functional socket test failed. Socket issues detected."
你好，我在工程中需要用到数学公式计算，头文件已经加载math.h文件了，但是编译时报错：\DA1468x_DA15xxx_SDK_1.0.12.1078\projects\dk_apps\demos\pxp_reporter\DA14683-00-Debug_QSPI/../ms5611.c:327: undefined reference to `log'
像这种问题在哪里设置处理？谢谢
Hi Dialog support team,
Da14580 can have 42Kb firm ware.
I downloaded DSPS 1458X, after build(sps_device_580.hex), it's 49Kb,I think 49Kb Da14580 doesn't have enough space.
but inhttps://support.dialog-semiconductor.com/connectivity/product/da14580?qt...
Memory Size of application image: 15 Kbytes(for dsps,memory size is 15Kb)
Hi Dialog，
我使用的发送函数是 send_ble_data(const uint8_t *data,uint16_t length),
send_ble_data(const uint8_t *data,uint16_t length)
嗨对话框:
目前我们使用VBAT1V的供电模式，IO会内部升压，大约在2.8V左右。
请问下这个电压是否可控制，或者是否能跟VBAT1V供电电压一致？
Check out the app note below to look into a proposed method for converting a temperature sensor analog signal into a frequency modulated digital signal using GreenPAK products from Dialog:
