DA14580 | Dialog Semiconductor customer support - 雷电竞下载app,雷电竞官网登录,雷竞技安卓下载

DSPS Android version not showing the device number

Forums:

Dialog Smartbond Bluetooth Low Energy – Software

Hi,

I am using PAN1740 USB Dongle board. I have flashed sps_device code in to PAN1740.

(1) I can see the device serial number in IOS DSPS app. Howervr I can not see the serial number in android app. Is this facility is ot available in android?.

(2) I can able to send data from serial terminal to app when I am using the breakout board. However I am not able to send the data when i use my custom board. I have debugger from TI and I have connected PAN1740 in SWD interface (SWCLK and SWDIO) pins. What could be the reason?.

DA9062 Preconfigured for Artix-7

Forums:

PMIC, Audio and Haptics Questions

Is there a DA9062 preconfigured for use with the Artix-7 without requiring an evaluation/dev board or ini file to program it? We are prototyping a handful of custom developed Artix-7 boards and right now, it seems impossible to purchase just a handful of DA9062-00AM1s (and I don't know if those are preconfigured or not but the Arty A7 board schematics lists that PMIC) while the DA9062-10AM1 is available in small quantities but doesn't appear to be a perfect match for the Artix-7?

Thanks,

Stephen

Reference design or schematics for DA6011 with Intel ATOM E3xxx processors

Forums:

PMIC, Audio and Haptics Questions

Hi All,

We are evaluating DA6011 with Intel ATOM E3xxx processors alone for our development and we like to know exactly each matching power rail of DA6011 to each power rails of Intel E3xxx processor. So can anyone please help us on this by providing any reference design or schematics.

Thanks,
Sriram.

Current Consumption comparison between da14580 and da14585

Forums:

Dialog Smartbond Bluetooth Low Energy – Hardware (device & reference designs)

Hello there

I'm thinking about migrating from da14580 to da14585.
我知道da14585继承人有限元分析基本相同tures of the da14580 in addition to new ones, but I wonder how much current consumes the 85 in comparison to the 80. I mean, in a general view, consumption is higher, lower or the same?
Thanks.

BLE Custom Profile -Bonding

Forums:

Dialog Smartbond Bluetooth Low Energy – Software

Hi, where can i change tk.key in Training_05_ble_secutity_example? the truct type security_configuration in SDK 5.0.4 does not have the "tk" field. And when i debug the example without any changes and use Light Blue app( to scan the device), I don't see the device. Can you tell me why the code does not run corectly(Must I change the code before debug the program?) and where can i change the tk.key and csrk.key?

通过UART DA14580闪烁

Forums:

Dialog Smartbond Bluetooth Low Energy – Software

Hi,

I'm trying to program the DA14580 via UART with a MSP432P401A. I have connected DA14580 UART2(P0.0 and P0.1) pins to UART pins of MSP.

I would like to flash the keil project sps_device. How can I flash to PAN1740?.

Is it possible with keil5?. Should I change the pin numbers?. Or is it possible with smartsnippetstudio?. Thank you.

Enabling USE_POWER_OPTIMIZATIONS and XTAL16_SETTLED

Forums:

Dialog Smartbond Bluetooth Low Energy – Software

Hi , My project is based on prox_reporter_ext available on SDK 5.0.4. I am using GTL over UART interface and extended sleep mode. I also enabled CFG_POWER_OPTIMIZATIONS. I tried to find how many times take the XTAL16 to settle but it seems XTAL16_SETTLED is not checked on wake up when CFG_POWER_OPTIMIZATIONS is used. XTAL16_TRIM_READY seems not being used too.

I probalby missed something on how to use this flags and sleep/wake up mechanisms.

Can you tell me why this flags are not checked on wake up when CFG_POWER_OPTIMIZATIONS is used ?

Thanks for help.

Interfacing PAN 1740 (from PAN1740 USB Dongle Breaout)with external MCU.

Forums:

Dialog Smartbond Bluetooth Low Energy – Hardware (device & reference designs)

Hi,

I would like to interface PAN1740 from the PAN1740 USB Dongle breakout board to external MCU from Texas Instuments ( A development board which has USB to Serial converter).

Kindly see the image attached. I would like to solder the UART pins of PAN 1740 Dogle board to MCU. Is this method is fine?. Thank you.

Reference documents

Forums:

Dialog Smartbond Bluetooth Low Energy – Software

Hi Diolag,

I have found missing these reference docs

please provide the link

[10] Riviera Waves Kernel (RW-BT-KERNEL-SW-FS), Riviera Waves.

[11] GAP Interface Specification (RW-BLE-GAP-IS), Riviera Waves.

[12] GATT Interface Specification (RW-BLE-GATT-IS), Riviera Waves.

[13] ATTDB Interface Specification (RW-BLE-ATTDB-IS), Riviera Waves.

[14] Proximity Profile Interface Specification (RW-BLE-PRF-PXP-IS), Riviera Waves

Is it possible to interface PAN1740 from PAN1740-BEACON break out board_

Forums:

Dialog Smartbond Bluetooth Low Energy – Hardware (device & reference designs)

Hello,

I would like to test PAN1740 with MSP432. I did not find any break out boards for the PAN1740. I have a PAN1740-BEACON board. Is it possible to interface PAN1740 from Beacon board?. I did not find the pinout. Can someone share the pinout?. Thank you.

Pages