P01_PADPWR_CTRL_REG (0x50003070)问题相关！
我们项目需要IO口输出1V几的电压，但是我们使用供电电压是1V几，VBAT1V的供电方式，会使电路处在升压模式，这样DA14580 IO口输出书2.7V的电压。
我测试过通过修改 P01_PADPWR_CTRL_REG =0xff，可以将P0口的输出高电平电压设置为VBAT1V的电压，但是P1口还是VBAT3V的电压，请问下如何将P1口的电压也设置成VBAT1V的电压？还需要特殊的操作？
Where can I download the HOGPD keyboard example for reference?
Dear Dialog employee,
I want to create a generic HID bluetooth device using HOGPD profile to send keyboard event to HOST, but I can't find a proper example in SDK.
Do you have the keyboard HID examples available?
Regards,
Jerry
callback fuction
Hi, i have question about the main loop. I can't find the function which return callback functions such as: app_on_init , app_on_system_powered... i'm reading example ble_app_peripheral in SDK 5.0.4
IRQ
I am making some changes to the CodeLess code to fit the application that I need. I have added a read notify characteristic that I would like to use to monitor when the input of one of the GPIO pins goes high and when it goes back to low. I want to use an IRQ to do this but I am not too sure where the best place to add the IRQ in the CodeLess code is. Where would the best place to add this IRQ be?
Thanks,
Anthony
handle - custs1_env.shdl;" param->handle and custs1_env.shdl in this statement.">How to understand "attr_id = param->handle - custs1_env.shdl;" param->handle and custs1_env.shdl in this statement.
How to understand "attr_id = param->handle - custs1_env.shdl;" param->handle and custs1_env.shdl in this statement.
How is param->handle and custs1_env.shdl generated?
ACMP as Differential Receiver
Forums:
Can the analog comparators be configured to act as a receiver for a differential signal (+/-5V), with the two pairs on the plus and minus of the ACMP. The spec has the max negative voltage as 1.2V, does this not allow for a 5V signal?
Thanks
Colin Stanley
GP Files for examples Found in PDF version of the CookBook
Forums:
Hi,
技术支持提供一个链接吗to download the application examples provided in the GreenPack PDF CookBook.//www.wsdof.com/sites/default/files/greenpak_cookbook_january_2019.pdf
Thanks,
Sending a Preset Number of Pulses
Forums:
Hi all,
Refering to the GreenPak CookBook,//www.wsdof.com/sites/default/files/greenpak_cookbook_january_2019.pdf
discussing the technique in Sending a Preset Number of Pulses, I have attempted to setup the LUTs and Macrocells as described, but could not get it to work. Could anyone provide the settings. I am attempting to set a number of pulses within a set period, that would repeat, driven by an external clock. An help is much appreciated.
Bluetooth connection problems
I use the tda14580.
Now I have a problem in the process of using it.
Sometimes the connection time between Bluetooth and the gateway is long.
After the connection is successful, there will be disconnection sometimes.
Sometimes after the two are disconnected, they cannot be reconnected. However, the mobile phone can search the Bluetooth broadcast and connect it .
Asking for help !
Wanted: older DSPS+SDK source code
Hello Support Team,
Where can I find a copy (ZIP file) of source code for Dialog Serial Port Service version 3.150.2, which includes SDK version 3.0.6.0?
The DA14580-based product I support uses a modified version of said source code, but I need to know what the unmodified source code looked like.
I have searched your company's web site without success. Please help! Thanks!
Pages
