Hi,
We are interfacing i2c based hdc1080 SENSOR IC from TI.
Can you please provide at least steps for i2c driver to implement to access hdc1080? Please do not refer i2c_eeprom code. We can not proceed further without this evaluation done as other sensors are also I2c based.
请问调用ke_malloc时没有足够的内存，结果是返回0，还是软件reset？我代码实验的结果是会reset。
Hi,
Can you please provide I2c based sensor code example but not eeprom.
Seems can not found on digikey or mouser? Is it confidential or public, and what's the price? Thanks!
在dialog的官网上能看到，但是digikey上没有，是否不公开？
Hello everybody!
1.当用DA14580作为主机时，怎么实现获得RSSI信号的强度值，是读取寄存器的值还是其他方法？
2.当用DA14580作为从机时，是设置寄存器的值来实现调节发射功率吗？
1.当用DA14580作为主机时，怎么实现获得RSSI信号的强度值，是读取寄存器的值还是其他方法？
2.当用DA14580作为从机时，是设置寄存器的值来实现调节发射功率吗？
Hi all,
I'm confronted with a peculiar behavior of the DSPS that I don't seem to be able to understand, hopefully somebody else can help. I'm running the SPS server software on a DA14580 in external uC configuration (main uC is a MSP430). The SPS client software (the original SPS host project) runs on a Dialog USB dongle (HW flow control is disabled, no problems there). What I want to do is to send data from the MSP430 to a Windows terminal over SPS:
MSP430 --> DA14580 (DevKit Pro, SPS server) --> DA14580 (Dongle, SPS client) --> Terminal (PC)
