/// - GAPM_PUBLIC_ADDR: Public Address
/// - GAPM_PROVIDED_RND_ADDR: Provided random address
/// - GAPM_GEN_STATIC_RND_ADDR: Generated static random address
/// - GAPM_GEN_RSLV_ADDR: Generated resolvable private random address
/// - GAPM_GEN_NON_RSLV_ADDR: Generated non-resolvable private random address
/// - GAPM_PROVIDED_RECON_ADDR: Provided Recsonnection address (only for GAPM_ADV_DIRECT)
.addr_src = GAPM_PUBLIC_ADDR,
Hi
I am really confused. I cannot find a single example code/document/reference API document that could lead me to implementing an external processor talking to Murata ZY(DA14580) module.
Where is the detail for message handling protocol between BLE stack on module and external processor. what software code is available to run on an external processor.
All the examples are using DA1458x for external processor. I need to know for a different processor e.g. freescale or atmel or any other,
Hi,
In our application we are using PAN1740 to capture ECG and transmit the data to android device.
PAN1740 is powered from a battery. Systick timer is used to generate interrupt at 250 sps and one ADC read is carried out in the ISR.
We are observing some kind of a glitch in the ECG as seen in the attachments( All the data was logged in keil). We are using SDK 3.10 and throughput_eval work-space to do this.
We verified it using all 4 ADC pins The glitch is seen randomly.
1) What might be the cause for the problem?
Hi Dialog
Q1: Is there any doc related how to use the WHITE_LIST for multible slve to one central connection ??
Q2 : As per my understanding in order to use WHITE_LIST =>
STEP 1 :In DSPS_HOST project i have to configure all my slaves(7 as per DSPS_HOST code) bd address and type .
/// BD Address of device
.peer_addr_0 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
Hi, dialog,
嗨
we are in manufacturing stage of our devices and we need support for OTP of at least 100 PAN1740. For first 16 we tried to solder wire on the PAN1740 pads and this process is causing
a lot of errors (mostly with the lose wire). we have in-system programming pads but cause density of our board is really high soldering the wires on that pads are affecting other components.
We have purchased 100 PAN1740 if possible we need a programmer or programming solution(an attachment for PAN1740) that we can use to otp those boards.
Hi Dialog,
We are using DA14580 with boost mode and it is operating at 3.3v for IO. Is that possible to make its IO level to be 1.8v?
Thanks,
我现在想要做以下几个信号测试
1.信号连续变调测试
2.信号连续无变调测试
3.前，中，后频道的测试
4.支持Full Hopping模式测试
5.BURST波形测试
6.连续性收信测试
不知道怎么去调用函数，怎么配置寄存器
因为做的产品要出口，要做韩国KC 要提供测试数据
我们的芯片有这部分的测试数据吗
Hi dialog staff
Hi Dialog team,
Pls show me how to apply the BD address from product header in EEPROM or SPI Flash.
If the "CFG_NVDS_TAG_BD_ADDRESS" is changed, I know a BD Address also to change.
I don't want to use OTP header. Because that's an experimental production.
