各位好，
我的透传应用场景每笔传输的数据量20B，但是实时性很高。我将DSPS v_5.150.2 的Connection interval minimum 改为7.5，MTU改为23。串口中断收到数据后立即调用attmdb_att_set_value
现测试：TX RX短接回环，14580连接手机，手机发20B后监听，收到14580回数据后，做收发时间差记录，大概要59ms， 不能满足要求。能否做到30ms以下？
请问，有哪些改进的方向？
调用attmdb_att_set_value后，多久才触发notification or indication。这个时间间隔能否缩短，有没有办法立即出发。
Hello everyone, I got an issues on waking up the da4580 from extended sleep during the main loop. This is what I have done.
Hi Dialog
DSPS_HOST connected withall available DSPS_DEVICES(6) ,
We are using a DA14580 in an external processor application as a central, and after a scanning procedure, our second DA14580 (a peripheral) is discovered.
Worth noting is also the fact that the scanning procedure returns 0x45 after 10 seconds (TIMEOUT), which is according to documentation expected.
app_set_mode中心我的()s implemented like inhttp://pastebin.com/FdkrJv5s
Out connect procedure app_connect(char indx) is implemented like inhttp://pastebin.com/WHUMmqbF
hi，support
现在我只能用树形网络，mesh网络有发布预期吗？
按照官方教程，开启连接配对可进行数据加密。
而我现在不想使用连接配对输入密码的过程，想可以直接连接，而在发送数据的时候，对数据进行加密。
因为主从机的密钥是固定的，所以从机发送给主机，主机应该是可以解析出原始数据的。
现在的问题是，我在SDK中没有找到相关的API，请问该如何操作。
Hi all,
I am looking for somekind of tutorial in order to get started with the SUOTA implementation, can you please indicate anykind of documents that can help me to get started ?
Thanks in advance
Hi Dialog
I am using MUARATA P2ML 3656 LBCA2HnZYZ Dev board (DA14580) , when i connect thid board in BOOST mode , jlink is disconneting , why ??
how to use dev kit in both modes(BOOST and BUCK) ?
thank you
Hi all,
I have a pro dev kit and as far as i know there is a flash on the mother board, how can i burn the custom .bin so my device will boot upon power up ?
Thanks in advanced
目前设计的板子用LDO芯片输出2.5V供电，但是DA14580在2.5V电压下偶尔可以工作，偶尔不能工作。
但是换成3.3V就可以正常工作了。
DA的工程师可以解答吗？
