I am trying to use the devboard PRO da14580 by connecting the pins that would normally go to the daughter board to a bare chip on a pcb I made.
I have attached SW_CLK, SW_Data, Vpp, Vdd, and GND. I do not have external oscillators attached.
Are there any other steps I need to do this or a guide somewhere? I for some reason cannot read the chip when trying to program.
Hi Dialog team,
I use spi flash as the external storage area of DA14580.
Can the DA14580 give the flash memory protection ID to the external spi flash?
Best regards,
Sean
Hi Dialog,
I planned to flash the program from UART P_04 &P_05 with 57.6.
我遵循AN-B-001文档，并将USB的RX＆TX引脚连接到DA14580和USB中的UART电缆。
我打开了真正的术语终端（如TERA术语）软件来看响应。现在我重置了电路板，它正在将下面的值连续发送如下
Hi,
I am looking to implement a simple coex scheme between DA14580 and an external radio in a shared antenna design. I wish to grant antenna to the DA14580 whenever required (priority to BLE). I looked at the wlan_coex.c implementation and found that KE_EVENT_BLE_EVT_START and KE_EVENT_BLE_EVT_END are the events generated. I could see the events being generated for every advertisement for a peripheral implementation. Is it safe to assume that the event handlers for these events is the correct place to switch the antenna?
Hi Dialog Support Team
We are interested in Range extender Module - i have referred this document - UM-B-045_DA14580 Range extender ver 2 reference application_v1.1 , module mentioned in this document is DA14580 , Is the same module available with Da14583 , so that i do not need to implement external SPI flash ??
How can i get mentioned Range Extender with Da14580 module , Please share the link to buy and the Distributor details
thank you Dialog.
我正在设计一款可穿戴式产品，贴在上面仪器电路数据，传感传感数码为32kbit / s，如果需要da14580蓝牙实这些数码上手机，可口来及吗？我听起来4.0芯片速度不再高，理论上可以达到1Mbit / s，穷人实际使用时达。如果不行的，能推荐一款芯片吗？
Dear MT_Dialog,
I am wondering what is the error that i have done. I have reset the development kit by pressing the reset button but I am still not be able to download the firmware into the development kit. I am using QSPI Programmer in SmartSnippets v1.3.3.710 and I want to download a hex file into the development kit just for testing purposes. I am using this blinky-580.hex from github.
Thank you very much!
Dear MT_Dialog,
AD8232:https://www.sparkfun.com/products/12650
ADXL345:https://www.sparkfun.com/products/9836?_ga=1.5833971.1949835572.1486702787
I just took the DA14681 basic kit out of the box and when I try to debug the example:
DA1468x_SDK_BTLE_v_1.0.8.1050.1\projects\dk_apps\demos\ble_adv
I get "Cannot read register..." Errors
I found some references to this error which recomended to disable the sleep mode in user_config.h, however, I cannot find this file anywhere.
Thank you for your help!
Andreas
SEGGER J-Link GDB Server V5.12e Command Line Version
JLinkARM.dll V5.12e (DLL compiled Apr 29 2016 15:03:58)
Hi! I'm new to programming these devices. I have a module with the DA14580 Attached. It's called the HJ-580LA. I'm trying the get the DSPS working on this device. While I can boot into the DSPS program using the "Booter", I cannot figure out how to make the program stay when disconnected from power/reset. All I am using right now is a simple TTYUSB cable to program using the RX/TX ports. The module I am using has the following pins available:
