Connection Manager Discover/Connect Tab Not Shown after Selecting "Boot as Central" | Dialog Semiconductor customer support

4 posts / 0 new

Last post

Mon, 2016-07-25 23:30

Ming-tun Hsieh

Offline

Last seen:4 years 6 months ago

加入:2016-07-20十八25

Connection Manager Discover/Connect Tab Not Shown after Selecting "Boot as Central"

The Connection Manager Discover/Connect tab is not shown after selecting "Boot as Centra.l"

Attachment:

Connection_Manager_Error.pdf

Device:

DA14581

Wed, 2016-07-27 16:49

MT_dialog

Offline

Last seen:1 day 12 hours ago

加入:2015-06-08 11:34

Hi Ming-tun Hsieh,

There are quite some posts in troubleshooting the Connection manager on the support forum, please check the one posted below.

http://support.dialog-semiconductor.com/connection-manager-problem

Thanks MT_dialog

Thu, 2016-07-28 02:39

Ming-tun Hsieh

Offline

Last seen:4 years 6 months ago

加入:2016-07-20十八25

Hi MT_dialog,

I checked the posts, but could not find answers.

Everything is OK initially and ends with "Script processing completed". However When I hit "Boot as Central", the Discover/Scan tab did not appear.

Shown below is the log message:

Lowest address = 00000000
Highest address = 00003EEB
Pad Byte = FF
8-bit Checksum = A0

Tools directory: C:\Program Files (x86)\ConnectionManager\bin\firmware_upload\
Using HEX file: "C:\Program Files (x86)\ConnectionManager\bin\firmware_upload" "full_emb.hex"

--- Generated JLink Script File ---
r
w2 50000012, A6
W2 50003308, 2e
loadbin "full_emb.bin", 0
verifybin "full_emb.bin", 0
r
g
exit
---

SEGGER J-Link Commander V4.72 ('?' for help)
Compiled Jun 12 2013 15:47:30

Script file read successfully.
DLL version V4.72, compiled Jun 12 2013 15:47:08
Firmware: J-Link OB-SAM3U128 V1 compiled Aug 28 2015 19:26:23
Hardware: V1.00
S/N: 480055663
VTarget = 3.300V
Info: Found SWD-DP with ID 0x0BB11477
Info: FPUnit: 4 code (BP) slots and 0 literal slots
Info: Found Cortex-M0 r0p0, Little endian.
Found 1 JTAG device, Total IRLen = 4:
Cortex-M0 identified.
JTAG speed: 100 kHz
Processing script file...

Reset delay: 0 ms
Reset type NORMAL: Resets core & peripherals via SYSRESETREQ & VECTRESET bit.

Writing 00A6 -> 50000012

Writing 002E -> 50003308

Loading binary file... [full_emb.bin]
Writing bin data into target memory @ 0x00000000.

Loading binary file full_emb.bin
Reading 16108 bytes data from target memory @ 0x00000000.
Verify successful.

Reset delay: 0 ms
Reset type NORMAL: Resets core & peripherals via SYSRESETREQ & VECTRESET bit.

Script processing completed.

====> [18:35:17.570] Rx <====
UART COM11 Open

====> [18:35:17.587] Tx <====
Src Task : 0x3f (TASK_APP)
Dst Task : 0xd (TASK_GAPM)
味精Id : 0x3402 (GAPM_RESET_CMD)
Operation : 0x01
Payload : 02 34 0d 00 3f 00 01 00 01

星期四,2016-07-28 02:53

Ming-tun Hsieh

Offline

Last seen:4 years 6 months ago

加入:2016-07-20十八25

After selecting "Load

After selecting "Load Firmware..", and selected full_emb_581.hex, it worked.