GAP_ERR_COMMAND_DISALLED发生，FW将停止广告。

Hi Dialog Staff,

Thank you for your reply.

我将检查SDK5中的鞍骨筒。
I would like to review the code of my project.

Thank you.

Dear Sirs,

>When you terminate the advertising procedure then you should get a GAP_ERR_CANCELED, if you start advertising while >you are allready advertising then you will get a GAP_ERR_COMMAND_DISALLOWED.

我有个问题。

I want to know the conditions under which user_app_adv_undirect_complete() is called.
I think that user_app_adv_undirect_complete() is called after FW stops advertising.
但是，我对自己的思想没有信心。

Please tell me the conditions under which user_app_adv_undirect_complete() is called.
Thank you.

Dear Dialog staff,

Thank you for your reply.

>>If you are advertising and you invoke the app_easy_gap_advertise_stop() it issues a GAPM_CANCEL_CMD in order to cancel the on going air operation,this will cancel the advertising procedure.

I understand that "app_on_adv_undirect_complete callback"
is not called If FW do not run the app_easy_gap_advertise_stop().
(Please let me know if my thinking is wrong.)

Once again, I checked the operation of my projects.

a. In the case of normal,
"app_on_adv_undirect_complete callback" has been called after app_easy_gap_advertise_stop() has been executed.

b. In the case of GAP_ERR_COMMAND_DISALLOWED,
在调用“app_od_undirect_complete回调”之前，在调用“app_on_adv_undirect_complacke之前，执行此案例并不具有app_easy_gap_advertise_stop（）。
I do not understand the reason why this happens.

如果你知道的话，请告诉我。
Thank you.

Dear Dialog staff,

对不起，我是错误的问题。

>>I assume that you are operating under fully hosted mode.
Please let me more about “fully hosted mode".

Today, I was allowed to run the “blue_app_barebone” example in SDK5, Then GAP_ERR_NO_ERROR error has occurred, FW was stopped advertise.
（我没有做出更改以外的是发出登录。）

My Project and “blue_app_barebone” example is different, but stops the way is very similar.
I think that my project has not been to the “fully hosted mode”.

sorry to hear many times.
Thank you.

Thank you for your reply.

1.
>>The fully hosted mode means that the application runs in the 580 internal processor, in fully embedded mode the application runs on an external proccesor.

Excuse me. Not well understood…
How do I can judge whether internal processor or external processor?

Hope that helps.
I am using a development kit of TypeZY(by murata corporation).
TypeZY is Downloading FW to via UART from MDK-ARM.

2.
>>您在鞍骨筒示例中看到的Gap_err_no_error无错误状态，当设备已成功重置时，您应该得到一个Gap_Err_No_Error，并且当设备已成功完成配置时，该设备已成功重置和其他类似的消息。

Thank you.

I was able to understand GAP_ERR_NO_ERROR.
However, I do not understand about GAP_ERR_COMMAND_DISALLOWED.

I understand that "app_on_adv_undirect_complete callback” is not called If FW do not run the app_easy_gap_advertise_stop().
(Please let me know if my thinking is wrong.)

Once again, I checked the operation of my projects.

a. In the case of normal,
"app_on_adv_undirect_complete callback" has been called after app_easy_gap_advertise_stop() has been executed.

b. In the case of GAP_ERR_COMMAND_DISALLOWED,
在调用“app_od_undirect_complete回调”之前，在调用“app_on_adv_undirect_complacke之前，执行此案例并不具有app_easy_gap_advertise_stop（）。
I do not understand the reason why this happens.

如果你知道的话，请告诉我。

Thank you.

Dear dialog staff,

Thank you for your reply.

1. Thank you.
I was running in a fully embedded mode.

2. Thank you.
I will re-check my project and app-ble-barebone.

I want to first resolve the GAP_ERR_NO_ERROR.

即使在发生了Gap_Err_No_Error之后，
I want to continue the broadcast of advertising.

Please let me a good way.
I'm glad when there is a sample project that would be helpful.

sorry to hear many times.
Thank you.

Dear Dialog staff,

Thank you for your reply.

I checked the operation of the FW again.
在调用“app_on_connection回调”之后显示Gap_err_no_error状态。

I want to make “app_on_connection callback" does not occur,
Because My FW does not need to be a connection.

Is there something a good way?
(I’m thinking of changing the advertise type from “undirect" to “non_connection".)

Thank you.

Dear Dialog staff,

Thank you for your reply.
I have a two questions.

1.Sorry，我正在使用SDK5.0.3。
有样本将有助于SDK5吗?

I think I just change the setting(e.g. user_config.h) or the advertise start method.

For example, please let me how to change the advertising mode of “ble_app_barebone sample" to "non-connectable mode".

我选择了SDK5。
However, I can’t decide which choice to SDK5 or SDK3.

At the moment, Which do you think is better choice?
If the support of SDK3 continues, I might consider the use of SDK3.

Sorry to hear many times.
Thank you.

Thank you for your reply.

1.
>you can change the user_config.h file in the non-connectable section and make your device non-connectable in the barebone example by using the app_easy_gap_non_connectable_advertise_start() function in order to start advertising.

请告诉我关于“user_config.h”文件的更多信息。
我想知道要在“user_config.h”文件中要修改的值。

Thank you.

Thank you for your reply.

我一直在使用“BLE_APP_BAREBONE”示例。
I changed the code of user_barebone.c.

//before
void user_app_adv_start(void)
{
…
struct gapm_start_advertise_cmd* cmd;
cmd = app_easy_gap_undirected_advertise_get_active();
…
app_easy_gap_undircated_advertise_start（）;
}

//after
void user_app_adv_start(void)
{
…
struct gapm_start_advertise_cmd* cmd;
cmd = app_easy_gap_non_connectable_advertise_get_active（）;
…
app_easy_gap_non_connectable_advertise_start();
}

它无法构建，因为app_easy_gap_non_connectable_advertise_get_active（）
is not defined.

I have defined the app_easy_gap_non_connectable_advertise_get_active()
到“app_easy_gap.h”文件。
(I was referring to the app_easy_gap_undirected_advertise_get_active().)

Build came to pass. However, FW is can’t advertise the update, advertise stops.
Maybe, I'm wrong how to define the app_easy_gap_non_connectable_advertise_get_active().

Is there something a good way?
(I would like some code, please.)

Thank you.

Hi Dialog Staff,
Thank you for your reply.

It was able to to continue to advertise for FW.
Today, I did a test, but there was no problem.

Maybe, I think that this matter has been resolved.
非常感谢。