DA14580 as a master : connexion stage

Hi,

I'm trying to initiate a connexion from a DA14580 to another BLE device.

I started from the barebone project and modified the user_app_init() function like this:


void user_app_init( void )
{
// Initialize Manufacturer Specific Data
mnf_data_init();
default_app_on_init();

struct gapm_start_connection_cmd connect;
连接。nb_peers = 1;

连接。peers[0].addr.addr[0] = 0x03;
连接。peers[0].addr.addr[1] = 0xE5;
连接。peers[0].addr.addr[2] = 0x5B;
连接。peers[0].addr.addr[3] = 0x16;
连接。peers[0].addr.addr[4] = 0x4A;
连接。peers[0].addr.addr[5] = 0x54;

连接。peers[0].addr_type = 0; //public
连接。con_intv_min = 100;
连接。con_intv_max = 100;
连接。ce_len_min = 0x0;
连接。ce_len_max = 0 x5;
连接。con_latency = 0;
连接。op.addr_src = GAPM_PUBLIC_ADDR;
连接。peers[0].addr_type = GAPM_PUBLIC_ADDR;
连接。superv_to = 0x1F4;// 500 -> 5000 ms ;
连接。scan_interval = 0x180;
连接。scan_window = 0x160;
连接。op.code = GAPM_CONNECTION_DIRECT;
gapm_execute_connect_op( &connect );
}

I also added two callbacks:


void user_app_scanning_completed( void )
{
arch_puts( "\ncomplite" );
}

void user_on_adv_report_ind( struct gapm_adv_report_ind const * report )
{
arch_puts( "\nok" );
}

When I run this code, none of the callbacks are called and it fires an exception.
What did I do wrong?
Is it the good way to connect?

-------- update -----------

Ok, I changed static allocation of the message by:

struct gapm_start_connection_cmd *connect = app_connect_start_msg_create();

and replaced gapm_execute_connect_op()

by

ke_msg_send( connect);

I, no more have the exception but the code still do nothing...

-----------------------------

Thanks
问候