顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。_handler?

请注意，扫描是观察者模式。
msg-> mode = gap_observer_mode;//GAP_GEN_DISCOVERY
msg->op.code = GAPM_SCAN_ACTIVE;
msg-> op.addr_src = gapm_public_addr;
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。SCAN_FILT_DUPLIC_EN;

I downloaded dsps, the difference is that I am using latest sd5, and **msg->mode = GAP_OBSERVER_MODE** mode, I didn't see the break point was reached. PLEASE help.

我也改变了差距的角色_OBSERVER_SCA to GAP_CENTRAL_MST and backwards, but still not work. please help, it has taken me days, please help.
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。onst struct gapm_configuration user_gapm_conf = {
//.ROLE = GAP_OBSERVER_SCA，
.role = GAP_CENTRAL_MST,
.irk = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
///设备外观（0x0000 - 未知外观）
//Fill in according tohttps：//developer.bluetooth.org/gatt/characteristics/pages/charracteristi ...
.appearance = 0，
.appearance_write_perm = gapm_write_disable，
.name_write_perm = gapm_write_disable，
/// Maximal MTU
.max_mtu = 23,

here is sending:
app_easy_timer(300, scan_cb);
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。OC(GAPM_START_SCAN_CMD, TASK_GAPM, TASK_APP, gapm_start_scan_cmd);
// Maximal peer connection
//msg->mode = GAP_GEN_DISCOVERY ; //
msg-> mode = gap_observer_mode;
msg-> op.code = gapm_scan_passive;
msg-> op.addr_src = gapm_public_addr;
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。SCAN_FILT_DUPLIC_EN;
msg->interval = 100;
msg->window = 5000;
ke_msg_send(msg);

void scan_cb(void)
{
struct gapm_cancel_cmd * cmd = (struct gapm_cancel_cmd *) KE_MSG_ALLOC(GAPM_CANCEL_CMD, TASK_GAPM, TASK_APP, gapm_cancel_cmd);
cmd->操作= gapm_scan_passive;//设置GAPM_SCAN_PASSIVE.
ke_msg_send(cmd);// Send the message

}

顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。callbacks user_app_callbacks = {
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。LL,
.app_on_disconnect = NULL,
.app_on_update_params_rejected = NULL,
.app_on_update_params_complete = null，
.app_on_set_dev_config_complete = default_app_on_set_dev_config_complete，
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。complete = NULL,
.app_on_adv_direct_complete = NULL,
.app_on_db_init_complete = default_app_on_db_init_complete,
.app_on_scanning_completed = user_scanning_completed，
.app_on_adv_report_ind = user_adv_report_ind，
#if（ble_app_sec）
.app_on_pairing_request = null，
.app_on_tk_exch_nomitm = null，
.app_on_irk_exch = NULL,
.app_on_csrk_exch = null，
.app_on_ltk_exch = NULL,
.app_on_pairing_succeded = NULL,
.app_on_encrypt_ind = NULL,
.app_on_mitm_passcode_req = null，
.app_on_encrypt_req_ind = NULL,
#endif // (BLE_APP_SEC)
};

in advertise side:

// ---------------------------------------------------------------------------
//-------------NON-CONNECTABLE & UNDIRECTED ADVERTISE RELATED COMMON --
///广告服务数据
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。tising AD type flags, shall not be set in advertising data
#define user_advertise_data“\ x03”\
ADV_TYPE_COMPLETE_LIST_16BIT_SERVICE_IDS\
ADV_UUID_DEVICE_INFORMATION_SERVICE

顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。tising data length - maximum 28 bytes, 3 bytes are reserved to set
#define USER_ADVERTISE_DATA_LEN (sizeof(USER_ADVERTISE_DATA)-1)
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。tising name
#define USER_DEVICE_NAME ("a")
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。tising name Length
#define USER_DEVICE_NAME_LEN (sizeof(USER_DEVICE_NAME)-1)
/// Scan response data
#define USER_ADVERTISE_SCAN_RESPONSE_DATA ""
/// Scan response data length- maximum 31 bytes
#define USER_ADVERTISE_SCAN_RESPONSE_DATA_LEN (sizeof(USER_ADVERTISE_SCAN_RESPONSE_DATA)-1)

// ---------------------------------------------------------------------------
//-------------DIRECTED ADVERTIZE---RELATED----------------------------

顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。onst struct advertise_configuration user_directed_advertise_conf ={
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。tise operation type.
.advertise_operation=ADV_DIRECT,
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。rce of the device:
.address_src = gapm_public_addr，
///Advertising channel map
.channel_map = 0x7，
};

static const struct inction_advertise_configuration user_directed_advertise_target_address_conf = {
/// BD Address of device
.ddr = {0x1,0x2,0x3,0x4,0x5,0x6}，
///设备的地址类型0 = public / 1 =私有随机
.addr_type=0
};

// ---------------------------------------------------------------------------
// ------------------- param更新--------------------------

static const struct connection_param_configuration user_connection_param_conf = {
///在BLE双槽（1.25ms）中测量的连接间隔最小值
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。nvert from milliseconds (ms) to double slots
.intv_min = ms_to_doubleslots（10），
///在BLE双槽（1.25ms）中测量的连接间隔最大值
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。nvert from milliseconds (ms) to double slots
.intv_max = MS_TO_DOUBLESLOTS(20),
/// Latency measured in connection events
.latency = 0，
/// Supervision timeout measured in timer units (10 ms)
///使用宏观MS_TO_TIMERUNITS从毫秒（MS）转换为定时器单位
.time_out = ms_to_timerUnits（1250），
/// Minimum Connection Event Duration measured in ble double slots (1.25ms)
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。nvert from milliseconds (ms) to double slots
.ce_len_min = MS_TO_DOUBLESLOTS(0),
/// Maximum Connection Event Duration measured in ble double slots (1.25ms)
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。nvert from milliseconds (ms) to double slots
.ce_len_max = MS_TO_DOUBLESLOTS(0),
};

// ---------------------------------------------------------------------------
// ------------------- - - GAPM ---相关-----------------------------------

顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。onst struct gapm_configuration user_gapm_conf = {
。role = gap_peripheral_slv，
.irk = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
///设备外观（0x0000 - 未知外观）
//Fill in according tohttps：//developer.bluetooth.org/gatt/characteristics/pages/charracteristi ...
.appearance = 0，
.appearance_write_perm = gapm_write_disable，
.name_write_perm = gapm_write_disable，
/// Maximal MTU
.max_mtu = 23,
///仅限外围设备：*******************************************************************
///在BLE双槽（1.25ms）中测量的连接间隔的从属的最低限度
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。nvert from milliseconds (ms) to double slots
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。_DOUBLESLOTS(10),
///从位于BLE双槽（1.25ms）中测量的连接间隔的最优选的最大值
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。nvert from milliseconds (ms) to double slots
.con_intv_max = MS_TO_DOUBLESLOTS(20),
/// Slave preferred Connection latency. It is measured in connection events skipped
.con_latency = 0，
/// Slave preferred Link supervision timeout measured in timer units (10 ms)
///使用宏观MS_TO_TIMERUNITS从毫秒（MS）转换为定时器单位
.superv_to = MS_TO_TIMERUNITS(1000),
/// Privacy settings bit field (0b1 = enabled, 0b0 = disabled)
/// - [bit 0]: Privacy Support
/// - [bit 1]: Multiple Bond Support (Peripheral only); If enabled, privacy flag is
/// read only.
如果你对收到的广告事件感兴趣，那就是GAPM ADV REPORT IND。静态const struct advertive\配置用户\定向\播发\配置={visible.
.flags = 0
};

please help

谢谢，你能给我发电子邮件吗？codes?
bld2014@sohu.com.

by the way,i can get advertise message by using sniffer tool,so it shouldnot be advertise side problem, i will check the snippet tool,happy weekend and thanks

谢谢，最后，得到它的工作。
one more question:
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。(setting to 5, works) to " msg->window = 50;" or " msg->window = 500", it didn't catch adv indication, but call user_scanning_completed(defined in user callback file) immediately, why? what is the meaning of window here?

app_easy_timer(300, scan_cb);
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。OC(GAPM_START_SCAN_CMD, TASK_GAPM, TASK_APP, gapm_start_scan_cmd);
// Maximal peer connection
msg-> mode = gap_observer_mode;
msg-> op.code = gapm_scan_passive;
msg-> op.addr_src = gapm_public_addr;
//msg->filter_duplic = SCAN_FILT_DUPLIC_EN;
顺便说一下，我在GAPM\u ADV\u REPORT\u IND中设置了一个断点，但是没有看到它到达了。SCAN_FILT_DUPLIC_DIS;
msg->间隔= 10;
msg->window = 5;
ke_msg_send(msg);