gapm_cmp_evt_handler中的一个错误？

请注意，扫描是观察者模式。
msg-> mode = gap_observer_mode;// gap_gen_discovery.
msg-> op.code = gapm_scan_active;
msg-> op.addr_src = gapm_public_addr;
msg->filter_duplic = SCAN_FILT_DUPLIC_EN;

我下载了DSP，区别在于我使用最新的SD5，而** msg-> mode = gap_observer_mode **模式，我没有看到达到断点。请帮忙。

我也将角色从Gap_observer_sca更改为Gap_Central_mst和向后，但仍然不起作用。请帮忙，它带来了几天，请帮忙。
static const struct gapm_configuration user_gapm_conf = {
//.ROLE = GAP_OBSERVER_SCA，
。role = gap_central_mst，
.irk = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}，
///设备外观（0x0000 - 未知外观）
//根据填写https：//developer.bluetooth.org/gatt/characteristics/pages/charracteristi ...
.appearance = 0，
.appearance_write_perm = gapm_write_disable，
.name_write_perm = gapm_write_disable，
/// Maximal MTU
.max_mtu = 23，

在这里发送：
app_easy_timer（300，scan_cb）;
struct gapm_start_scan_cmd *msg = (struct gapm_start_scan_cmd *)KE_MSG_ALLOC(GAPM_START_SCAN_CMD, TASK_GAPM, TASK_APP, gapm_start_scan_cmd);
//最大对等连接
// msg-> mode = gap_gen_discovery;//
msg-> mode = gap_observer_mode;
msg-> op.code = gapm_scan_passive;
msg-> op.addr_src = gapm_public_addr;
msg->filter_duplic = SCAN_FILT_DUPLIC_EN;
msg->间隔= 100;
味精- >窗口= 5000;
KE_MSG_SEND（MSG）;

void scan_cb（void）
{
struct gapm_cancel_cmd * cmd =（struct gapm_cancel_cmd *）ke_msg_alloc（gapm_cancel_cmd，task_gapm，task_app，gapm_cancel_cmd）;
cmd->操作= gapm_scan_passive;//设置GAPM_SCAN_PASSIVE.
ke_msg_send(cmd);// Send the message

}

static const struct app_callbacks user_app_callbacks = {
.app_on_connection = NULL,
.app_on_disconnect = null，
.app_on_update_params_rejected = null，
.app_on_update_params_complete = null，
.app_on_set_dev_config_complete = default_app_on_set_dev_config_complete，
.app_on_adv_undirect_complete = NULL,
.app_on_adv_direct_complete = null，
.app_on_db_init_complete = default_app_on_db_init_complete，
.app_on_scanning_completed = user_scanning_completed，
.app_on_adv_report_ind = user_adv_report_ind，
#if（ble_app_sec）
.app_on_pairing_request = null，
.app_on_tk_exch_nomitm = null，
.app_on_irk_exch = NULL,
.app_on_csrk_exch = null，
.app_on_ltk_exch = NULL,
.app_on_pairing_succeded = null，
.app_on_encrypt_ind = null，
.app_on_mitm_passcode_req = null，
.app_on_encrypt_req_ind = null，
#endif //（ble_app_sec）
};

在广告方面：

// ---------------------------------------------------------------------------
// -------------不可连接和无向广告相关常见 -
///广告服务数据
///广告广告类型标志，不得在广告数据中设置
#define user_advertise_data“\ x03”\
adv_type_complete_list_16bit_service_ids \
avad_uuid_device_information_service.

/// Advertising data length - maximum 28 bytes, 3 bytes are reserved to set
#define user_advertise_data_len（sizeof（user_advertise_data）-1）
///广告名称
#define user_device_name（“a”）
///广告名称长度
#define user_device_name_len（sizeof（user_device_name）-1）
///扫描响应数据
#define user_advertise_scan_response_data“”
///扫描响应数据长度 - 最多31个字节
#define user_advertise_scan_response_data_len（sizeof（user_advertise_scan_response_data）-1）

// ---------------------------------------------------------------------------
// ---------------------------------------------------

static const struct advertise_configuration user_directed_advertise_conf ={
///宣传操作类型。
.advertise_operation=ADV_DIRECT,
/// Own BD address source of the device:
.address_src = gapm_public_addr，
///广告频道地图
.channel_map = 0x7，
};

static const struct inction_advertise_configuration user_directed_advertise_target_address_conf = {
///设备的BD地址
.ddr = {0x1,0x2,0x3,0x4,0x5,0x6}，
///设备的地址类型0 = public / 1 =私有随机
.addr_type=0
};

// ---------------------------------------------------------------------------
// ------------------- param更新--------------------------

static const struct connection_param_configuration user_connection_param_conf = {
///在BLE双槽（1.25ms）中测量的连接间隔最小值
/// use the macro MS_TO_DOUBLESLOTS to convert from milliseconds (ms) to double slots
.intv_min = ms_to_doubleslots（10），
///在BLE双槽（1.25ms）中测量的连接间隔最大值
/// use the macro MS_TO_DOUBLESLOTS to convert from milliseconds (ms) to double slots
.intv_max = MS_TO_DOUBLESLOTS(20),
///在连接事件中测量的延迟
.latency = 0，
///在定时器单元（10ms）中测量的监控超时
///使用宏观MS_TO_TIMERUNITS从毫秒（MS）转换为定时器单位
.time_out = ms_to_timerUnits（1250），
///在BLE双槽（1.25ms）中测量的最小连接事件持续时间
/// use the macro MS_TO_DOUBLESLOTS to convert from milliseconds (ms) to double slots
.ce_len_min = ms_to_doubleslots（0），
///在BLE双槽（1.25ms）中测量的最大连接事件持续时间
/// use the macro MS_TO_DOUBLESLOTS to convert from milliseconds (ms) to double slots
.ce_len_max = ms_to_doubleslots（0），
};

// ---------------------------------------------------------------------------
// ------------------- - - GAPM ---相关-----------------------------------

static const struct gapm_configuration user_gapm_conf = {
。role = gap_peripheral_slv，
.irk = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}，
///设备外观（0x0000 - 未知外观）
//根据填写https：//developer.bluetooth.org/gatt/characteristics/pages/charracteristi ...
.appearance = 0，
.appearance_write_perm = gapm_write_disable，
.name_write_perm = gapm_write_disable，
/// Maximal MTU
.max_mtu = 23，
///仅限外围设备：*******************************************************************
///在BLE双槽（1.25ms）中测量的连接间隔的从属的最低限度
/// use the macro MS_TO_DOUBLESLOTS to convert from milliseconds (ms) to double slots
.con_intv_min = MS_TO_DOUBLESLOTS(10),
///从位于BLE双槽（1.25ms）中测量的连接间隔的最优选的最大值
/// use the macro MS_TO_DOUBLESLOTS to convert from milliseconds (ms) to double slots
.con_intv_max = ms_to_doubleslots（20），
///从属喜欢连接延迟。它在跳过的连接事件中测量
.con_latency = 0，
///从机器单元（10 ms）测量的Slave优选链接监控超时
///使用宏观MS_TO_TIMERUNITS从毫秒（MS）转换为定时器单位
.superv_to = ms_to_timerUnits（1000），
/// Privacy settings bit field (0b1 = enabled, 0b0 = disabled)
/// - [位0]：隐私支持
/// - [位1]：多键支持（仅限外围设备）;如果已启用，隐私标志是
/// read only.
/// - [bit 2]: Reconnection address visible.
.flags = 0.
};

请帮忙

谢谢，你能给我发电子邮件吗？
bld2014@sohu.com.

顺便说一下，我可以使用嗅探器工具来获取广告消息，所以它不应该是宣传的侧面问题，我会检查赛段工具，周末愉快，谢谢

谢谢，最后，得到它的工作。
one more question:
if I changed " msg->window = 5;" (setting to 5, works) to " msg->window = 50;" or " msg->window = 500", it didn't catch adv indication, but call user_scanning_completed(defined in user callback file) immediately, why? what is the meaning of window here?

app_easy_timer（300，scan_cb）;
struct gapm_start_scan_cmd *msg = (struct gapm_start_scan_cmd *)KE_MSG_ALLOC(GAPM_START_SCAN_CMD, TASK_GAPM, TASK_APP, gapm_start_scan_cmd);
//最大对等连接
msg-> mode = gap_observer_mode;
msg-> op.code = gapm_scan_passive;
msg-> op.addr_src = gapm_public_addr;
// msg-> filter_duplic = scan_filt_duplic_en;
msg-> filter_duplic = scan_filt_duplic_dis;
msg->间隔= 10;
msg->窗口= 5;
KE_MSG_SEND（MSG）;