DA1458x_Production_Line_Tool_v_3.0.7.466

Hi huangliangyu,

Dialog's local team will contact you.

Thanks MT_dialog

I also want to know how to burn firmware to OTP and test the chip on the production line, what is the sofwware DA1458x_Production_Line_Tool_v_3.0.7.466 for? where I can download this file? if it is not for production line burning and testing, can you tell me where I can get some info and document about production line burning and testing? thanks

Hi yy,

You can check the below docs for more information about the PLT tool.

http://support.dialog-semiconductor.com/resource/production-line-tool-so...

http://support.dialog-semiconductor.com/resource/um-b-008-user-manual-%E...

http://support.dialog-semiconductor.com/product/da14580in the production Line Tool Option

Thanks MT_dialog

thanks, I have several questions as below, pls help.
1.can I buy such a PLT board ? where can I buy one? I can't find it on digikey.com.

2.also, I want to know as we use the Murata module TypeZY which integrate the DA14580 and 16M clock and antenna all inside, if I need to design another daughter board to put the module on it and connect it to the PLT board?

3. since I use the module with 16M clock inside, Do I need to do the clock trimming work on production line?

4. the chip is programmed before it is solder on final board with SMT, right? I use JTAG to burn firmware currently, can the BLT set to burn via JTAG or can I set the JTAG pins as UART function? thanks for help

another question: how can I access to the resource page? is there any link?

Hi yy,

Just go to the Documents tab and choose the User Manual or the Application Note you are interested in. As far as you other questions a member from the local team will contact you.

Thanks MT_dialog

hello, I want to know if the PLT use P0_4 and P0_5 as UART connections to downlaod firmware. I checked the document and need to confirm with you. thanks

Hi yy,

Yes you can use the P0_4 and P0_5 pins to download firmware on the da.

Thanks MT_dialog

Hello,
I would be interested in knowing where we can buy the production line tool and how much it would cost?
It would be worth while noting it here to give others an idea.
Thanks

Hi There, there is a typical cost of approx $1000 per board (we recover cost only -we build in batches of 100's as you can appreciate its quite a complex tool). We don't sell it "off the shelf" through a catalog distribution house becasse of the support requirements. In China, we sell through our distributors and they also provide local hands on support to enable custmoers to set-up. In EMEA, we use a 3rd party (WSI) who will support the tool on a fee basis (they have extensive expeirence and have multipel end custmoer projects running in production with the PLT tool).

BR JE_Dialog

Hi,huangliangyu!

According to abvoe, you have done it, burn SPI with DA1458x_Production_Line_Tool_v_3.0.7.466.

我想知道如何烧固件的spiPLT tool?

Can you help me?

Hope to get your help. Thanks!

Hi Bean,

Our local team will contact you.

Thanks MT_dialog

where down this tools ?