Communication Manager

Hello Dialog,

I recently installed Connection Manager for my Lenovo Win10 computer, Dell E6330 Win7 64bit, Dell Inspiron Win7 64bit... Either works!!!

I installed JLink OB driver, FTDI driver, Microsoft .Net framework 4. And tried connection manager for 3.0.8 and 3.0.10 SDK. When I open the window of connection manager, I can see the com port, I can down load the firmware, but it can't work properly and please see the log as blow:

-----------------------------------------------------------------------------------------------------------------------------------------------
hex2bin v1.0.10, Copyright (C) 2012 Jacques Pelletier & contributors

Lowest address = 00000000
Highest address = 00003EEB
Pad Byte = FF
8-bit Checksum = A0

Tools directory: C:\Program Files (x86)\ConnectionManager\bin\firmware_upload\
使用十六进制文件:C: \程序文件(x86) \连接Manager\bin\firmware_upload" "full_emb.hex"

--- Generated JLink Script File ---
---
-----------------------------------------------------------------------------------------------------------------------------------------------------------

Please let me know what's wrong and what I have to do for communication manager!

It has worked for my previous DELL computer with Win8.1, installed the same thing but it worked well. This computer died, and I install the same thing into the new computer, it doesn't work for my try everything. The computer runs SDK/Keil tool very well. I is real frustrated and please help!!!

Thanks!

SEGGER J-Link Commander V4.72 ('?' for help)
Compiled Jun 12 2013 15:47:30
Unknown command line option loadbin.txt.