when I plug in an ISP programmer to the PC, the board does not enumerate in win10-64. only the power led blinks, nothing connected.
有什么建议么 ？
after long searching it turned out that R6 had a dry joint. these board are apparently not tested ..
after touching R6 up, the board enumerates as com40 , but GP designer softwhere still does not recognize the board.
有什么建议么 ？
Device:
Device Number:
in circuit programmer
我设法通过将GND，SDA，SCL和VDD从内部插座接线到有缺陷ISP板上的引脚中的电路编程器中使用高级平台，然后通过4线jst向电路板上的待编程芯片上的引脚连接器。SW抱怨套接字错误，但它们明智地添加了跳过选项。
我订购了一个新的ISP板，希望能够测试一个..
你好，
我很遗憾听到你的ISP板问题。为了提供一些帮助，你能回答一些快速的问题吗？
- When you say that the GP designer software doesn't recognize the board, can you confirm that the "Emulation" and "Test Mode" buttons are "greyed" out and un-clickable?
- The "DB HW-FW:" portion at the bottom of the window should just have a "-" following it. Is this correct as well?
- 如果您有其他GreenPak Designer Windows，您是否可以确保其中没有任何一个“调试”工具？
Although I'm not sure if this is the issue, we often solve similar behavior by either unplugging and re-plugging in the ISP board or by closing and re-opening the "Debug" window. I've included a link to the guide for our ISP board for your reference.
https：//www.dialog-seminile.com/sites/default/files/isp_board_quick ...
Craig
格雷格，
有一个GP Designer窗口，
no info on the board HW is given ( DB HW FW -) , no info on the connected device, I'm used to regularly plug and unplug the advanced programming platform.
emulation and test mode are greyed out.
it is clear to me that this ISP programmer never has been tested, given the tumbstoned resistor in the USB data path. it's just a DOA. I tried touching up the poorly soldered pads of the 2211 USB uart. wetting seems the problem.
there is no place where I can claim any defect or repair at the silego webshop..
我做了各种项目silego部分,mostly the 46620. this is my first ISP project soldering a blank device into the board, sofar donestuff with the advanced platform, and I have one more coming up.
我将有一个团队联系到你离线检查这里的更新，并确保我们为您解决了问题。BR JE_DIALOG.
I am having the same issue of ISP not being initialized in the GreenPAK software.
我已经使用同一ISP设备来编程相同的GreenPak模块2个月前，因此它不是一个装配问题。自上周更新GreenPak软件以来，它还没有工作。重新启动程序，计算机，拔掉USB尚未解决它。
它是如何解决的koen@weijand.nl？
谢谢，
莎拉
GreenPak 6.22“调试控制”找不到ISP v1.0（新的，首次使用）{SLG46826}和Universal Dev板（已知良好板）{SLG46620}。“仿真”和“测试模式”按钮是灰色的。系统信息：开发板是“N / D”。Windows 10 Pro，64位X64系统。两次尝试一次。ISP将显示为Windows“设备和打印机”控制面板中名为“系统编程器”的USB输入设备（HID兼容）。
嗨CSEBRUCH，
谢谢你的上诉。
关于ISP板，问题可能在软件中。现在，我们有一个修复。请在附件中查看文件。您必须用GreenPak Designer将相应的文件提取到文件夹（通常它位于文件夹C：\ Program Files \ Dival Semiconductor \ GreenPak Designer V.6.22（64位）中）并替换现有文件。雷竞技电竞平台在你制造它之后，ISP委员会应该工作。
关于depboards，我有其他问题：
1. Did the board work with the previous software revision?
2. Did you check all the connections like cable, USB port?
3. Could you check if USB input device appears in Device Manager (see Human Interface Device)
4.请检查是否未打开其他调试窗口。
5.您能否请告诉哪些LED在调试模式下在addboard上工作，并且没有调试模式
6.您是否尝试将addboard连接到另一台PC？需要排除到PC问题
Best regards,
Oleh Sapiha.
1. Yes, I was using the Dev Board on a different laptop. turned-in that laptop for repair, and loaded Greenpak on this laptop to continue development.
2.是的，将连接移动到不同的端口。每次Windows枚举DEV板
3.是，USB输入设备出现在设备管理器中
4. No other debug window is open, rebooted the computer many times, Even Uninstalled greenpak and then reinstalled. After trying repair install.
5.当USB电缆插入USB电缆时，Addboard有一个白色LED（停留）。这是唯一被照明的LED。
6.我有两个不同的私营企业，与其他笔记本电脑合作（用于维修）。两者都不适用于这台电脑
CSeebruch,
谢谢你的回应。
你能尝试一种可以帮助你的方法吗？尝试在设备管理器（人机界面设备）中卸载设备，然后直接插入adv板（没有任何USB集线器）并等到驱动程序将安装。GPAK设计师必须关闭。然后启动GPAK设计器并打开调试模式。
By the way, do you have any software, that can block the driver proper work?
Best regards,
Oleh Sapiha.
GreenPak调试现在看到了ADV板！USB电缆直接插入笔记本电脑（不使用集线器）。我今天晚些时候会尝试ISP董事会，看看它是否有效。
Thanks
CSeebruch,
我很高兴我帮助了你这个问题。如果您对GPAK设计师，硬件或芯片本身有任何疑问，请告诉我。
Best regards,
Oleh Sapiha.