随机可解析地址

我使用的SDK与最新的物联网发布，并使用beacon_suota_button作为基础。

我想改变从GAPM_STATIC_ADDR到GAPM_GEN_RSLV_ADDR。

#undef cfg_app_security / ***********************************************＊＊＊＊＊＊＊＊＊＊***************** * Privacy Capabilities and address configuration of local device: * - APP_CFG_ADDR_PUB No Privacy, Public BDA * - APP_CFG_ADDR_STATIC No Privacy, Random Static BDA * - APP_CFG_HOST_PRIV_RPA Host Privacy, RPA, Public Identity * - APP_CFG_HOST_PRIV_NRPA Host Privacy, NRPA (non-connectable ONLY) * - APP_CFG_CNTL_PRIV_RPA_PUB Controller Privacy, RPA or PUB, Public Identity * - APP_CFG_CNTL_PRIV_RPA_RAND Controller Privacy, RPA, Public Identity * * Select only one option for privacy / addressing configuration. ************************************************************************** */ #define USER_CFG_ADDRESS_MODE APP_CFG_ADDR_STATIC static const struct advertise_configuration user_adv_conf = { /** * Own BD address source of the device: * - GAPM_STATIC_ADDR: Public or Private Static Address according to device address configuration * - GAPM_GEN_RSLV_ADDR: Generated resolvable private random address * - GAPM_GEN_NON_RSLV_ADDR: Generated non-resolvable private random address */ .addr_src = GAPM_GEN_RSLV_ADDR, /// Minimum interval for advertising .intv_min = MS_TO_BLESLOTS(BEACON_ADVERTISING_INTERVAL), // 687.5ms /// Maximum interval for advertising .intv_max = MS_TO_BLESLOTS(BEACON_ADVERTISING_INTERVAL), // 687.5ms /** * Advertising channels map: * - ADV_CHNL_37_EN: Advertising channel map for channel 37. * - ADV_CHNL_38_EN: Advertising channel map for channel 38. * - ADV_CHNL_39_EN: Advertising channel map for channel 39. * - ADV_ALL_CHNLS_EN: Advertising channel map for channel 37, 38 and 39. */ .channel_map = ADV_ALL_CHNLS_EN, /************************* * Advertising information ************************* */ /// Host information advertising data (GAPM_ADV_NON_CONN and GAPM_ADV_UNDIRECT) /// Advertising mode : /// - GAP_NON_DISCOVERABLE: Non discoverable mode /// - GAP_GEN_DISCOVERABLE: General discoverable mode /// - GAP_LIM_DISCOVERABLE: Limited discoverable mode /// - GAP_BROADCASTER_MODE: Broadcaster mode .mode = GAP_GEN_DISCOVERABLE, /// Host information advertising data (GAPM_ADV_NON_CONN and GAPM_ADV_UNDIRECT) /// - ADV_ALLOW_SCAN_ANY_CON_ANY: Allow both scan and connection requests from anyone /// - ADV_ALLOW_SCAN_WLST_CON_ANY: Allow both scan req from White List devices only and /// connection req from anyone /// - ADV_ALLOW_SCAN_ANY_CON_WLST: Allow both scan req from anyone and connection req /// from White List devices only /// - ADV_ALLOW_SCAN_WLST_CON_WLST: Allow scan and connection requests from White List /// devices only .adv_filt_policy = ADV_ALLOW_SCAN_ANY_CON_ANY, /// Direct address information (GAPM_ADV_DIRECT/GAPM_ADV_DIRECT_LDC) /// (used only if reconnection address isn't set or privacy disabled) /// BD Address of device .peer_addr = {0x1, 0x2, 0x3, 0x4, 0x5, 0x6}, /// Direct address information (GAPM_ADV_DIRECT/GAPM_ADV_DIRECT_LDC) /// (used only if reconnection address isn't set or privacy disabled) /// Address type of the device 0=public/1=private random .peer_addr_type = 0, }; static const struct gapm_configuration user_gapm_conf = { /// Device Role: Central, Peripheral, Observer, Broadcaster or All roles. (@see enum gap_role) .role = GAP_ROLE_PERIPHERAL, /// Maximal MTU .max_mtu = 247, /// Device Address Type /// - GAPM_CFG_ADDR_PUBLIC: Device Address is a Public Static address /// - GAPM_CFG_ADDR_PRIVATE: Device Address is a Private Static address /// - GAPM_CFG_ADDR_PRIVACY: Device Address generated using Privacy feature .addr_type = GAPM_CFG_ADDR_PRIVACY, /*********************** * Privacy configuration *********************** */ /// Private static address // NOTE: The address shall comply with the following requirements: // - the two most significant bits of the address shall be equal to 1, // - all the remaining bits of the address shall NOT be equal to 1, // - all the remaining bits of the address shall NOT be equal to 0. // In case the {0x00, 0x00, 0x00, 0x00, 0x00, 0x00} null address is used, a // random static address will be automatically generated. .addr = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /// Duration before regenerate device address when privacy is enabled. .renew_dur = 50000, /// Device IRK used for resolvable random BD address generation (LSB first) .irk = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f}, /**************************** * ATT database configuration **************************** */ /// Attribute database configuration (@see enum gapm_att_cfg_flag) /// 7 6 5 4 3 2 1 0 /// +-----+-----+----+-----+-----+----+----+----+ /// | DBG | RFU | SC | PCP | APP_PERM |NAME_PERM| /// +-----+-----+----+-----+-----+----+----+----+ /// - Bit [0-1]: Device Name write permission requirements for peer device (@see gapm_write_att_perm) /// - Bit [2-3]: Device Appearance write permission requirements for peer device (@see gapm_write_att_perm) /// - Bit [4] : Slave Preferred Connection Parameters present /// - Bit [5] : Service change feature present in GATT attribute database. /// - Bit [6] : Reserved /// - Bit [7] : Enable Debug Mode .att_cfg = GAPM_MASK_ATT_SVC_CHG_EN, /// GAP service start handle .gap_start_hdl = 0, /// GATT service start handle .gatt_start_hdl = 0, /************************************************** * Data packet length extension configuration (4.2) ************************************************** */ /// Maximal MPS .max_mps = 0, /// Maximal Tx octets .max_txoctets = 251, /// Maximal Tx time .max_txtime = 2120, };

编译后，我可以看到地址每2-3分钟变化一次，不管我在renew_dur中设置的数字是多少。我的配置错误吗?(另外，续费的时间单位是多少?)女士吗?

我试过

#define cfg_app_security.

并设置

#define user_cfg_address_mode app_cfg_cntl_priv_rpa_rand.

当连接调试器时，它似乎运行正常，但当通过SmartSnippets工具箱加载时，它将运行第一个~5秒，然后从扫描仪中消失。

我是否需要更改/启用其他定义?

谢谢你！