Hello, Colleguas! I use CodeLess DA14580 v_5.380.5.4.0. For devices scaning I send next commands:
AT+ADVSTOP\r
AT+CENTRAL\r
AT+GAPSCAN\r
and I see some devices, but I haven't see devices with "receiving only broadcast packets", includes my mobile phone. My mobile phone see all the devices includs "with receiving only broadcast packets". Can I switch on some kind of feature in CodeLess DA14580 v_5.380.5.4.0 for scaning all types bluetooth? Or it is hardware bug?
Device:
Hi Alex-Elektron,
Can you please clarify what you mean with "receiving only broadcast packets"? Do you mean non-connectable advertising packets?
Thanks, PM_ Dialog
Yes, I mean non-connectable advertising packets. Without ScanResponse
Hi Alex,
I need another clarification. What is the device that advertises non-connectable events? Is it another DA14580 which is running the CodeLess firmware? And what is the BD address?
Thanks, PM_Dialog
设备与HM-10 JDY-08固件。与下一个settings the JDY-08 is clearly detected by DA14580 (with codeless firmware) and mobile phone:
AT+ADTY2 (Only allow Advertising and ScanResponse)
AT+IBEA1
AT+DELO2
AT+PWRM0
AT+ADVI7
AT+RESET
if I change AT+ADTY2 to AT+ADTY3 (page 24) the JDY-08 is detected only by mobile phone.
Hi Alex-Elektron,
Thanks for the indication. Not sure what happened as we provide support only for Dialog products and application reference designs. For further debugging, you can run the CodeLess in debug mode and add a break point into user_on_adv_report_ind() callback function. This function will be triggered if the DA14580 is configured as Central and a scanning procedure is initiated. It will give you a display with the advertising reports.
Thanks, PM_Dialog