大家好，
我想评估DA14580的吞吐量。
我有软件吞吐量_eval_central_fh和antipput_eval_peripheral_fh
I have the expert kit with a USB dongle and the dialog2014-00055.
I have also the DA14580EVKT-B.
我用作中央设备DA14580EVKT和专家套件作为外设。
我使用了SmartSnippets的工具。
我遵循第8.1节上的文档UM-B-030。
对于中央设备：
我用选择的UART端口打开SmartSnippets项目
on the smartsnippets, on the windows Booter i download the firmware : succeed.
我按下按钮开始中央，并再次下载固件，选择哪些固件？
I open a second smartsnipppets for the peripheral:
我用选择的UART端口打开SmartSnippets项目
on the smartsnippets, on the windows Booter i download the firmware : succeed.
我按下按钮开始外围设备, and the firmware download again, which firmware is selected ?
在2个窗口上，日期速率监视器的扫描按钮不起作用，
如何获取扫描按钮功能？
谢谢你的支持
大家好，
额外的评论。
When I press the button JLINK, the scan button is available, but nothing happens on the scan list ,
[info @ 15-02-24 18:00:49]等待扫描完成....
谢谢你的支持
嗨对话框，
我按照SmartSnippets工具的帮助进行数据速率监视器。
对于中央设备：
一个SmartSnippets实例，我选择正确的UART端口
我用电路板da14580devkt作为中央设备
I used the project throughput_eval_central_fh, I compile it with the keil IDE, and dowload the firmware with Booter of SmartSnippets.
I pres the button start central, on the irmware is download again.
我按下按钮jlink
扫描按钮可用
对于阴离子装置：
一个SmartSnippets实例，我选择正确的UART端口
I used the board from the dialog expert KIT(mother and daugther board)
I used the project throughput_eval_central_fh, I compile it with the keil IDE, and dowload the firmware with Booter of SmartSnippets.
when I pres start periferal nothing happen ? no firmware download like start central
我错过了我的环境的事吗？
I press scan button of the central device
I get the message : [INFO @15-02-25 12:14:27] Waiting for scan to complete....
是我的设置还可以吗？
Best Regards
Hi Peley,
我用专业套件作为一个中心复制了这个问题。使用另一个专家套件作为中央显示正确的操作。我设法通过将跳线从P03放置到CS，J5引脚9和10，让它与Pro套件一起使用。你也可以尝试吗？Pro和专家套件之间存在一些差别。我们需要弄清楚这个应用程序的差异是什么。我会回到这个问题。
最好的祝福，
RvA
嗨RVA，
Thanks for your first feedback.
我将专家套件用作中心，我可以下载固件，
我选择按钮DK
我按下按钮开始中央
I used the basic kit as peripheral , I can download the firmware
我选择按钮DK
我按下按钮开始外围设备
但是当我按下中央设备上的按钮扫描时，中央设备没有看到设备。
log file of the central device:
[信息@ 15-02-25 17:52:08]成功下载了固件文件到电路板。
[INFO @15-02-25 17:57:38] Waiting for scan to complete....
[info @ 15-02-25 17:57:46]扫描完成。
[INFO @15-02-25 17:58:14] Waiting for scan to complete....
[info @ 15-02-25 17:58:22]扫描完成。
[INFO @15-02-25 17:58:35] Successfully downloaded firmware file to the board.
[INFO @15-02-25 17:58:38] Waiting for scan to complete....
[INFO @15-02-25 17:58:46] Scan completed.
[info @ 15-02-25 17:59:21]等待扫描完成....
[INFO @15-02-25 17:59:28] Scan completed.
[信息@ 15-02-25 18:00:12]等待扫描完成....
[信息@ 15-02-25 18:00:13]等待扫描完成....
[info @ 15-02-25 18:00:13]扫描完成。
[INFO @15-02-25 18:00:20] Scan completed.
外围设备的日志文件：
[INFO @15-02-25 17:57:28] Connection to COM30 port has successfully opened.
[INFO @15-02-25 17:57:28] Started download procedure...
[信息@ 15-02-25 17:57:28]成功与COM30端口断开连接。
[info @ 15-02-25 17:57:28]成功下载了固件文件到电路板。
I have an additional question, when I press the start central or the peripheral button, the smartsnippets load the firmware selected by the booter window ?
button
This is the status I have
Best regards
Hi RvA,
When, I download the firmware of the peripheral on the basic kit.
我收到以下日志文件：
[INFO @15-02-25 18:53:58] Read 0 bytes from file D:\eSoftthings\dialog\working_smartSnippets\Projects\periferal\full_emb_sysram.hex. 15312 bytes have been ignored because their record address was greater or equal to 0x80000.
[INFO @15-02-25 18:53:58] Connection to COM30 port has successfully opened.
[info @ 15-02-25 18:53:58]开始下载程序...
[信息@ 15-02-25 18:53:58]成功与COM30端口断开连接。
[INFO @15-02-25 18:53:58] Successfully downloaded firmware file to the board.
Is it an issue ?
Best regards
嗨对话小组，
您是否对专家委员会和基本套件之间的吞吐量有所改善（我们可以替换USB加密狗？
Best Regards
嗨对话小组，
TEST 1:
CENTRAL (expert kit)
For he central device I used the expert kit.
我打开smartsnippets v3.6。
我打开booter窗口，然后选择项目吞吐量_eval_central_fh生成的十六进制文件。
我收到以下日志：
[信息@ 15-02-27 11:01:58]从文件full_emb_sysram.hex中读取16040字节。
[信息@ 15-02-27 11:01:58]与COM46端口的连接已成功打开。
[INFO @15-02-27 11:01:58] Started download procedure...
[ACTION @15-02-27 11:01:59] Please press the hardware reset button on the board to start the download process.
[INFO @15-02-27 11:02:02] Reset detected
[INFO @15-02-27 11:02:05] Successfully disconnected from port COM46.
[INFO @15-02-27 11:02:05] Successfully downloaded firmware file to the board.
我打开数据速率监视器窗口，然后按按钮开始中央。
我收到以下日志文件：
(信息@15-02-27 11:02:10]从fi读取15156字节le \working_smartSnippets\resources\GTL_central.hex.
QUESTION 1: Could you explain what is this hex file, how it is generated ?
[信息@ 15-02-27 11:02:10]与COM46端口的连接已成功打开。
[info @ 15-02-27 11:02:10]开始下载程序...
[ACTION @15-02-27 11:02:11] Please press the hardware reset button on the board to start the download process.
[信息@ 15-02-27 11:02:14]重置检测到
[INFO @15-02-27 11:02:17] Successfully disconnected from port COM46.
[INFO @15-02-27 11:02:17] Successfully downloaded firmware file to the board.
扫描按钮现在可用。
外围（USB Doogle）
I try to used the USB doogle as peripheral:
我打开smartsnippets v3.6。
I open the Booter window and select the hex file generated by the project throughput_eval_peripheral_fh.
我收到以下日志：
[info @ 15-02-27 11:21:52]从文件d：\ sesoftthings \ dialog \ working_smartsnippets \ projects \ periferal \ full_emb_sysram.hex中读取15312字节。
[INFO @15-02-27 11:21:52] Connection to COM29 port has successfully opened.
[info @ 15-02-27 11:21:52]开始下载程序......
[信息@ 15-02-27 11:21:55]成功断开了COM29端口。
[Info @ 15-02-27 11:21:55]成功下载了固件文件到电路板。
I open the Data rate monitor window and press the button start peripheral.
我收到以下日志文件：
[信息@ 15-02-27 11:25:25]从文件\ Working_smartsnippets \ Resources \ gtl_peripheral.hex中读取14416字节。
QUESTION 2: Could you explain what is this hex file, how it is generated ?
[INFO @15-02-27 11:25:25] Connection to COM29 port has successfully opened.
[INFO @15-02-27 11:25:25] Started download procedure...
[ACTION @15-02-27 11:25:26] Please press the hardware reset button on the board to start the download process.
[错误@ 15-02-27 11:25:40]超时：重置信号未检测到超过15000毫秒。
[Info @ 15-02-27 11:25:40]成功与COM29端口断开连接。
[INFO @15-02-27 11:25:40] Failed downloading firmware file to the board.
问题3：是否有可能将USB模型用于Troughpult评估？
test2.
我改变了外围板，我拍摄了基本套件：
对于中央，我得到了相同的日志文件
For the peripheral.
外围（USB Doogle）
I try to used the USB doogle as peripheral:
我打开smartsnippets v3.6。
I open the Booter window and select the hex file generated by the project throughput_eval_peripheral_fh.
我收到以下日志：
[INFO @15-02-27 11:32:20] Read 15312 bytes from file \working_smartSnippets\Projects\periferal\full_emb_sysram.hex.
问题4：你能解释这个十六进制文件是什么，它是如何生成的？
[信息@ 15-02-27 11:32:20]与COM30端口的连接已成功打开。
[info @ 15-02-27 11:32:20]开始下载程序...
[INFO @15-02-27 11:32:24] Successfully disconnected from port COM30.
(信息@15-02-27 11:32:24]成功下载firmware file to the board.
I open the Data rate monitor window and press the button start peripheral.
我收到以下日志文件：
[INFO @15-02-27 11:35:48] Read 14416 bytes from file D:\eSoftthings\dialog\working_smartSnippets\resources\GTL_peripheral.hex.
[INFO @15-02-27 11:35:48] Connection to COM30 port has successfully opened.
[INFO @15-02-27 11:35:48] Started download procedure...
[Action @ 15-02-27 11:35:49]请按电路板上的硬件重置按钮开始下载过程。
[INFO @ 15-02-27 11:35:54]重置检测到
[INFO @15-02-27 11:35:57] Successfully disconnected from port COM30.
[INFO @15-02-27 11:35:57] Successfully downloaded firmware file to the board.
我按中心上的扫描按钮，在扫描列表上，我看不到外设的BD地址。
问题5：你能重现这个问题吗？
QUESTION 6: What is wrong on the test1 and the test2 ?
谢谢你的支持。
Best regards