DA14695 SUOTA failed

Hi Experts！

I have a trouble about SUOTA .

My hardware use DA14695 as MCU,16MB gd25LE128 as qspiFlash.My project is based /pxp_reporter.it worked perfect before I adjusted ROMSize to 2048*1024。

I made the following adjustments。

1>made our custom qspi_gd25LE128.h，rebuild uartboot&cli_programmer

2>redifine dg_configQSPI_CODE_SIZE_AA， add a new partition_table

#define dg_configQSPI_CODE_SIZE_AA (2048*1024) /* Take into account CMI firmware size */

#define NVMS_PRODUCT_HEADER_PART_START 0x000000 #define NVMS_PRODUCT_HEADER_PART_SIZE 0x002000 #define NVMS_FW_EXEC_PART_START 0x002000 /* Alignment to 512KB is dictated by the default FLASH_REGION_SIZE. */ #define NVMS_FW_EXEC_PART_SIZE 0x400000 /* +----------------512KB---------------------+ */ #define NVMS_GENERIC_PART_START 0x420000 #define NVMS_GENERIC_PART_SIZE 0x020000 #define NVMS_PLATFORM_PARAMS_PART_START 0x500000 #define NVMS_PLATFORM_PARAMS_PART_SIZE 0x0FF000 #define NVMS_PARAM_PART_START 0x6FF000 #define NVMS_PARAM_PART_SIZE 0x001000 /* Recommended location, 4KB before the end of the 1st flash section. */ /* +------------------2MB---------------------+ */ #define NVMS_FW_UPDATE_PART_START 0x700000 /* Alignment to 512KB is dictated by the default FLASH_REGION_SIZE. */ #define NVMS_FW_UPDATE_PART_SIZE 0x400000 /* This size is dictated by the default (512KB) FLASH_REGION_SIZE. */ #define NVMS_LOG_PART_START 0xB00000 #define NVMS_LOG_PART_SIZE 0x0FF000 #define NVMS_PARTITION_TABLE_START 0xBFF000 #define NVMS_PARTITION_TABLE_SIZE 0x001000 /* Recommended location, 4KB before the end of the flash. */ #define NVMS_USER_PART_START 0xC00000 #define NVMS_USER_PART_SIZE 0x100000 PARTITION2( NVMS_PRODUCT_HEADER_PART , 0 ) PARTITION2( NVMS_FW_EXEC_PART , 0 ) PARTITION2( NVMS_GENERIC_PART , PARTITION_FLAG_VES ) PARTITION2( NVMS_PLATFORM_PARAMS_PART , PARTITION_FLAG_READ_ONLY ) PARTITION2( NVMS_PARAM_PART , 0 ) PARTITION2( NVMS_FW_UPDATE_PART , 0 ) PARTITION2( NVMS_LOG_PART , 0 ) PARTITION2( NVMS_PARTITION_TABLE , PARTITION_FLAG_READ_ONLY ) PARTITION2( NVMS_USER_PART , 0 )

3>added some code and The compiled bin file size is 655,004 bytes.
4>burn CS code in OPT,set CACHE_FLASH_REG as 0x3

5>We can burn the running application.

6>copy The .img file under DA1469x-00-Release_QSPI_SUOTA to Android Phone,and Upgrade with Android SUOTA APP.After the file transfer is completed, the system does not work after reboot

7>I checked the Product Hearder using the toolbox，active FW image Address Was Set 0x700000

When using IDE debug, it looks like FW image is not loaded.

阅读64字节@ddress 0xEFFFFFC0 WARNING: Failed to read memory @ address 0xEFFFFFC0 WARNING: Failed to read memory @ address 0xEFFFFFFC

effffffe: Failed to execute MI command: -data-disassemble -s 4026531838 -e 4026531966 -- 3 Error message from debugger back end: Cannot access memory at address 0xeffffffe

Can you give me some help?