命令行擦除闪存失败

你好，

我用585 DEV-KIT基本开发板,党卫军工具箱版本为V5.0.8,敲入和你类似的命令,是可以擦除成功的。

请用最新的工具箱尝试。

操作过程信息如下：

C:\Program Files (x86)\ smartnippetstoolbox \ smartnippetstoolbox5.0.8 > smartnippetstoolbox .exe -chip DA14585-00 -type booter -jtag 480061335 -file C:\work\github\da1458x_sdks\6.0.10.511\utilities\flash_programmer\jtag_programmer。java.util.prefs.WindowsPreferences  WARNING: Could not open/create prefs root node Software\JavaSoft\ prefs at root 0x80000002。Windows RegCreateKeyEx(…)返回错误码5。发现ID为0x0BB11477的SW-DP没有预选AP。假设AP[0]为AHB-AP AP- idr: 0x04770021, Type: AHB-AP AHB-AP ROM: 0xE00FF000 (Base addr. bat)发现Cortex-M0 r0p0，小端序。CoreSight组件:ROMTbl[0] @ E00FF000 ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 000BB008 SCS ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 000BB00A DWT ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 000BB00B fbb BTLE device selected。使用默认的系统控制寄存器值:0xA6。发现SW-DP with ID 0x0BB11477使用预配置AP[0]作为AHB-AP与core AP- idr通信:0x04770021, Type: AHB-AP AHB-AP ROM: 0xE00FF000 (Base addr. bat)发现Cortex-M0 r0p0，小端序。CoreSight组件:ROMTbl[0] @ E00FF000 ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 000BB008 SCS ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 000BB00A DWT ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 000BB00B FPB成功下载固件到单板。 C:\Program Files (x86)\SmartSnippetsToolbox\SmartSnippetsToolbox5.0.8>SmartSnippetsToolbox.exe -chip DA14585-00 -type spi -jtag 480061335 -cmd erase Launching SmartSnippets Toolbox v 5.0.8.2321 Sep 25, 2019 3:54:24 PM java.util.prefs.WindowsPreferences  WARNING: Could not open/create prefs root node Software\JavaSoft\Prefs at root 0x80000002. Windows RegCreateKeyEx(...) returned error code 5. Found SW-DP with ID 0x0BB11477 No AP preselected. Assuming that AP[0] is the AHB-AP AP-IDR: 0x04770021, Type: AHB-AP AHB-AP ROM: 0xE00FF000 (Base addr. of first ROM table) Found Cortex-M0 r0p0, Little endian. FPUnit: 4 code (BP) slots and 0 literal slots CoreSight components: ROMTbl[0] @ E00FF000 ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 000BB008 SCS ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 000BB00A DWT ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 000BB00B FPB BTLE device selected. Using default baudrate: 57600 Bd. Successfully set SPI Flash gpios: CLK=P0_0, CS=P0_3, MISO=P0_5, MOSI=P0_6. SPI Flash memory erasing completed successfully.