These parts cannot be programmed in system unfortunately. Our socketed eval board allows one part to be programmed at a time for initial testing and prototyping. However, for production a standard variant would have to be used or a custom variant would have to be generated.
At this moment in time we do not have a standard variant for the DA9053 and the i.MX6SLL.
你好,达米安,
Do you have -00 parts? Do you have a sockted eval board?
kind regards,
Elliott Dexter
Hello Elliot,
We have DA9053-00C51 soldered on a board and we would like to program the firmware inside it for a iMX6SLL.
How we can do it if we don't have an EVK?
问候,
Damien
你好,达米安,
These parts cannot be programmed in system unfortunately. Our socketed eval board allows one part to be programmed at a time for initial testing and prototyping. However, for production a standard variant would have to be used or a custom variant would have to be generated.
At this moment in time we do not have a standard variant for the DA9053 and the i.MX6SLL.
Kind regards,
Elliott
Elliot,
How can I have a socketed eval board?
问候
你好,达米安,
They can be obtained through Avnet. We have two different versions for the two different packages.
Kind regards,
Elliott