您好，我正在尝试通过JTAG刻录内部闪存。但收到错误：
[错误SPI Flash @ 19-02-28 17:51:23] JTAG地址0x7FC7C0C的AddDition Error Info。（MSB第一）：FF FF FF F8。
[错误SPI闪存@19-02-28 17:51:23]内存刻录失败。
我尝试了两种配置：
SPI_CLK: P2_0
SPI\ U EN:第2\ U 3页
SPI_DI：P2_4
SPI_DO：P2_9.
和
SPI_CLK: P2_0
SPI\ U EN:第2\ U 3页
SPI_DI：P2_9.
SPI_DO：P2_4
设备：
嗨azimin，
Do you mean that you have the configurations you have mentioned in the Configuration window of SmartSnippets toolbox? Also, do you have a custom board, or you are using any of our development boards? If you try to connect over UART, could you please let me know if you are able to connect/burn successfully? Also, are you able to connect/erase the SPI flash over JTAG or your only issue is that you can not burn it?
Thanks, PM_Dialog
>您是否意味着您拥有SmartSnippets Toolbox的配置窗口中提到的配置？
是的
>另外，您是否有定制板，或者您正在使用我们的任何开发板？
我有一个定制董事会
> If you try to connect over UART, could you please let me know if you are able to connect/burn successfully?
首次我通过UART成功连接，但不能刻录或擦除固件。在此故障后，我无法再次连接，工具箱正在等待按重置按钮，但我没有它。
[INFO SPI Flash@19-03-01 11:53:51]固件文件C:\DiaSemi\DA14585\u SDK\6.0.10.511\config\toolbox\u resources/common/Flash_programmer.bin 已选择下载。
[INFO SPI Flash@19-03-01 11:53:51]已成功打开到COM16端口的连接。
[INFO SPI Flash @19-03-01 11:53:51] Started download procedure...
[INFO Booter @19-03-01 11:53:53] Successfully disconnected from port COM16.
[信息SPI Flash @ 19-03-01 11:53:53]与COM16端口的连接已成功打开。
[INFO Booter @19-03-01 11:53:53] Successfully disconnected from port COM16.
[信息SPI Flash @ 19-03-01 11:53:53]成功下载了固件文件到电路板。
[INFO SPI Flash@19-03-01 11:53:53]已成功配置SPI闪存端口和引脚。
[信息SPI Flash @ 19-03-01 11:53:58]从内存开始读取32768个字节。
[INFO SPI Flash@19-03-01 11:53:58]已成功打开到COM16端口的连接。
[info booter @ 19-03-01 11:54:05]从COM16端口成功断开了连接。
[信息SPI Flash @ 19-03-01 11:54:05]阅读已完成。阅读32768字节。
[INFO SPI Flash @19-03-01 11:55:08] Header records have been removed from hex file prox_reporter_586.hex.
[信息SPI Flash @ 19-03-01 11:55:08]从文件prox_reporter_586.hex读取29872字节。
[INFO SPI Flash@19-03-01 11:55:13]开始烧录地址0x00000处31016字节的内存。
[信息SPI Flash @ 19-03-01 11:55:13]与COM16端口的连接已成功打开。
[ERROR SPI Flash @19-03-01 11:55:18] Received error message while checking whether burning was successful: FFFFFFF8.
[INFO Booter@19-03-01 11:55:18]已成功从端口COM16断开连接。
[错误SPI闪存@19-03-01 11:55:18]内存刻录失败。
[INFO SPI Flash@19-03-01 11:55:32]开始烧录地址0x00000处31016字节的内存。
[INFO SPI Flash@19-03-01 11:55:32]已成功打开到COM16端口的连接。
[错误SPI Flash @ 19-03-01 11:55:37]检查刻录是否成功的同时收到错误消息：fffffff8。
[INFO Booter@19-03-01 11:55:37]已成功从端口COM16断开连接。
[错误SPI Flash @ 19-03-01 11:55:37]内存刻录失败。
[信息SPI Flash @ 19-03-01 11:55:49]与COM16端口的连接已成功打开。
[错误SPI Flash @ 19-03-01 11:55:49]检查SPI擦除是否成功的同时收到错误消息：FFFFFFFE。
[Info Booter @ 19-03-01 11:55:49]成功断开了COM16端口。
[错误SPI闪存@19-03-01 11:55:49]SPI内存擦除失败。
[INFO SPI Flash @19-03-01 11:56:07] Firmware File C:\DiaSemi\DA14585_SDK\6.0.10.511\config\toolbox_resources/common/flash_programmer.bin has been selected for downloading.
[信息SPI Flash @ 19-03-01 11:56:08]与COM16端口的连接已成功打开。
[INFO SPI Flash @19-03-01 11:56:08] Started download procedure...
[INFO Booter @19-03-01 11:56:09] Successfully disconnected from port COM16.
[信息SPI Flash @ 19-03-01 11:56:10]与COM16端口的连接已成功打开。
[info booter @ 19-03-01 11:56:10]成功与COM16端口断开了连接。
[INFO SPI Flash @19-03-01 11:56:10] Successfully downloaded firmware file to the board.
[INFO SPI Flash@19-03-01 11:56:10]已成功配置SPI闪存端口和引脚。
[INFO SPI Flash@19-03-01 11:56:13]已成功打开到COM16端口的连接。
[info booter @ 19-03-01 11:56:13]成功与COM16端口断开连接。
[信息SPI Flash @ 19-03-01 11:56:13] SPI内存擦除成功完成。
[信息SPI Flash @ 19-03-01 11:56:13]阅读内存以验证其内容擦除后...
[INFO SPI Flash@19-03-01 11:56:13]已成功打开到COM16端口的连接。
[错误SPI Flash @ 19-03-01 11:56:13]从电路板读取时收到错误消息：fffffffc。
[INFO Booter@19-03-01 11:56:14]已成功从端口COM16断开连接。
[错误SPI闪存@19-03-01 11:56:14]读取内存失败。
[INFO SPI Flash @19-03-01 11:56:14] Reading memory to refresh its contents....
[信息SPI Flash @ 19-03-01 11:56:14]连接到COM16端口已成功打开。
[ERROR SPI Flash @19-03-01 11:56:14] Received error message while reading from the board: FFFFFFFC.
[INFO Booter@19-03-01 11:56:14]已成功从端口COM16断开连接。
[错误SPI闪存@19-03-01 11:56:14]读取内存失败。
[INFO SPI Flash @19-03-01 11:58:03] Started reading 32768 bytes from memory.
[INFO SPI Flash @19-03-01 11:58:03] Connection to COM16 port has successfully opened.
[ERROR SPI Flash@19-03-01 11:58:03]从板读取时收到错误消息：ffffffffffc。
[INFO Booter@19-03-01 11:58:03]已成功从端口COM16断开连接。
[ERROR SPI Flash @19-03-01 11:58:03] Failed reading memory.
[信息SPI Flash @ 19-03-01 11:58:06]固件文件c：\ diasemi \ da14585_sdk \ 6.0.10.511 \ config \ toolbox_resources / common / flash_programmer.bin已被选中以下载。
[信息SPI Flash @ 19-03-01 11:58:06]与COM16端口的连接已成功打开。
[INFO SPI Flash @19-03-01 11:58:06] Started download procedure...
[动作SPI Flash @ 19-03-01 11:58:07]请按电路板上的硬件重置按钮启动下载过程。
[错误SPI闪烁@19-03-01 11:58:22]超时：超过16000毫秒未检测到复位信号。
[INFO Booter @19-03-01 11:58:22] Successfully disconnected from port COM16.
[INFO Booter @19-03-01 11:58:22] Successfully disconnected from port COM16.
[ERROR SPI Flash @19-03-01 11:58:22] Failed downloading firmware file to the board.
[错误SPI闪存@19-03-01 11:58:22]配置SPI闪存端口和引脚失败。
[INFO SPI Flash@19-03-01 11:58:30]固件文件C:\DiaSemi\DA14585\u SDK\6.0.10.511\config\toolbox\u resources/common/Flash_programmer.bin 已选择下载。
[INFO SPI Flash@19-03-01 11:58:30]已成功打开到COM16端口的连接。
[INFO SPI Flash@19-03-01 11:58:30]已开始下载过程。。。
[操作SPI Flash@19-03-01 11:58:31]请按主板上的硬件重置按钮开始下载过程。
[错误SPI Flash @ 19-03-01 11:58:46]超时：未检测到超过16000毫秒的重置信号。
[INFO Booter @19-03-01 11:58:46] Successfully disconnected from port COM16.
[错误SPI Flash@19-03-01 11:58:46]无法将固件文件下载到主板。
[错误SPI Flash @ 19-03-01 11:58:46]配置SPI闪存端口和引脚。
[INFO SPI Flash@19-03-01 12:08:13]固件文件C:\DiaSemi\DA14585\u SDK\6.0.10.511\config\toolbox\u resources/common/Flash_programmer.bin 已选择下载。
[信息SPI Flash @ 19-03-01 12:08:13]与COM16端口的连接已成功打开。
[信息SPI Flash @ 19-03-01 12:08:13]开始下载程序...
[操作SPI Flash@19-03-01 12:08:14]请按主板上的硬件重置按钮开始下载过程。
[错误SPI Flash @ 19-03-01 12:08:29]超时：未检测到超过16000毫秒的重置信号。
>此外，您是否能够通过JTAG连接/擦除SPI闪存，或者您唯一的问题是您无法刻录它？
No, I cant to erase, but connection seems okay
嗨azimin，
In case you have a custom board, could you please try to download firmware into the SystemRAM through Keil IDE? The reason that I suggest you that is to make sure that your board is fully functional, so I would suggest you to use the ble_app_bearbone example of the SDK, compile it for DA14586 and the download the firmware into SysRAM? Are you able to detect your device from a BLE mobile application? Also you could use the power profiler of SmartSnnippets toolbox to make sure that your device is advertising.
Thanks, PM_Dialog
是的，我的电路板正在使用Keil IDE，并且代码从RAM运行。我可以通过移动应用程序查看我的设备
嗨azimin，
The most possible reason why you are not able to connect and burn the SPI flash is why you are not have a reset circuit to your custom board. The SPI flash configuration from the SmartSnippets toolbox are correct and according to DA14586 datasheet. In all reference designs we have a reset button, when trying to connect the user can reset the board in order to download the flas_programmer in case of UART or the jtag_programmer in case of jtag. The smart snippets does not support flash functionalities, so the SDK includes the flash programmer project which is under 6.0.10.511\utilities\flash_programmer. If you check there are 2 output on from uart and one from jtag. When you are connected to smart snippets and press reset, you download one of the two binaries. Let me ask you something. Which version of JTAG are you using?
Thanks, PM_Dialog
你好，
最后我做了一块带复位电路的电路板。我重置芯片，然后按下连接按钮。
In case of J-link I got this log:
[信息SPI Flash @ 19-03-12 14:47:16]找到了带ID 0x0BB11477的SW-DP
[INFO SPI Flash@19-03-12 14:47:16]使用预配置的AP[0]作为AHB-AP与核心通信
[INFO SPI Flash @19-03-12 14:47:16] AP-IDR: 0x04770021, Type: AHB-AP
[信息SPI Flash @ 19-03-12 14:47:16] AHB-AP ROM：0xE00FF000（基本Addr。第一rom表）
[信息SPI Flash@19-03-12 14:47:16]发现Cortex-M0 r0p0，Little endian。
[信息SPI Flash @ 19-03-12 14:47:16] FpUnit：4代码（BP）插槽和0个字幕插槽
[信息SPI Flash @ 19-03-12 14:47:16] Coresight组件：
[INFO SPI Flash @19-03-12 14:47:16] ROMTbl[0] @ E00FF000
[INFO SPI Flash@19-03-12 14:47:16]ROMTbl[0][0]：E000E000，CID:B105E00D，PID:000BB008 SCS
[INFO SPI Flash@19-03-12 14:47:16]ROMTbl[0][1]：E0001000，CID:B105E00D，PID:000BB00A DWT
[INFO SPI Flash @19-03-12 14:47:16] ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 000BB00B FPB
[INFO SPI Flash@19-03-12 14:47:16]固件文件C:\DiaSemi\DA14585\u SDK\6.0.10.511\config\toolbox\u resources/common/jtag_programmer.bin 已选择下载。
[信息SPI Flash @ 19-03-12 14:47:16]成功下载了固件文件到电路板。
[INFO SPI Flash @19-03-12 14:47:16] Successfully configured SPI Flash ports and pins.
[INFO SPI Flash @19-03-12 14:47:19] Started burning memory with 31016 bytes of data at address 0x00000.
[错误SPI闪存@19-03-12 14:47:29]内存刻录失败。
在UART的情况下，我得到：
[信息SPI Flash @ 19-03-12 14:44:25]固件文件c：\ diasemi \ da14585_sdk \ 6.0.10.511 \ config \ toolbox_resources / common / flash_programmer.bin已被选中以下载。
[信息SPI Flash @ 19-03-12 14:44:26]与COM16端口的连接已成功打开。
[INFO SPI Flash@19-03-12 14:44:26]已开始下载过程。。。
[Info Booter @ 19-03-12 14:44:27]从COM16端口已成功断开连接。
[INFO SPI Flash @19-03-12 14:44:28] Connection to COM16 port has successfully opened.
[INFO Booter@19-03-12 14:44:28]已成功从端口COM16断开连接。
[信息SPI Flash @ 19-03-12 14:44:28]成功下载了固件文件到电路板。
[信息SPI Flash @ 19-03-12 14:44:28]成功配置了SPI闪存端口和引脚。
[INFO SPI Flash@19-03-12 14:44:37]开始烧录地址0x00000处31016字节的内存。
[INFO SPI Flash@19-03-12 14:44:37]已成功打开到COM16端口的连接。
[ERROR SPI Flash @19-03-12 14:44:53] Timeout while waiting to receive the most significant byte of packet length (10000 msecs)
[INFO Booter@19-03-12 14:44:53]已成功断开与端口COM16的连接。
[错误spi flash @ 19-03-12 14:44:53]内存刻录失败。
或这个：
[INFO SPI Flash@19-03-12 15:26:28]固件文件C:\DiaSemi\DA14585\u SDK\6.0.10.511\config\toolbox\u resources/common/Flash_programmer.bin 已选择下载。
[INFO SPI Flash@19-03-12 15:26:29]已成功打开到COM16端口的连接。
[INFO SPI Flash@19-03-12 15:26:29]已开始下载过程。。。
[INFO Booter @19-03-12 15:26:30] Successfully disconnected from port COM16.
[INFO SPI Flash@19-03-12 15:26:31]已成功打开到COM16端口的连接。
[INFO Booter @19-03-12 15:26:31] Successfully disconnected from port COM16.
[INFO SPI Flash@19-03-12 15:26:31]已成功将固件文件下载到主板。
[INFO SPI Flash@19-03-12 15:26:31]已成功配置SPI闪存端口和引脚。
[INFO SPI Flash@19-03-12 15:27:24]开始从内存中读取32768字节。
[INFO SPI Flash@19-03-12 15:27:24]已成功打开到COM16端口的连接。
[INFO Booter @19-03-12 15:27:31] Successfully disconnected from port COM16.
[信息SPI Flash @ 19-03-12 15:27:31]阅读已完成。阅读32768字节。
[信息SPI Flash @ 19-03-12 15:27:35]在地址0x00000时，使用31016字节的数据刻录内存。
[信息SPI Flash @ 19-03-12 15:27:35]与COM16端口的连接已成功打开。
[错误SPI Flash @ 19-03-12 15:27:41]检查刻录是否成功的同时收到错误消息：FFFFFFF8。
[信息Booter @ 19-03-12 15:27:41]成功与COM16端口断开连接。
[ERROR SPI Flash @19-03-12 15:27:41] Memory burning failed.
我正在使用j-link v6.42c
随着Keil运行时调试董事会的工作
嗨azimin，
如果我理解正确，可以从闪存程序员连接，但您无法刻录SPI闪存？您使用哪种SPI Flash在您的定制板中？也是空的吗？如果没有，你能擦除它吗？
Thanks, PM_Dialog
您好，我正在使用内部闪存。最后我发现了问题 - 我忘了连接vcc_flash。不，它有效。感谢你付出的努力。
嗨azimin，
由于您没有连接的VCC_FLASH，您将无法访问内部SPI闪存。很高兴你识上你的问题。干杯!
Thanks, PM_Dialog