Update advertising address and data on the fly

Hi Dialog,

We need update advertising address and data on the fly in main loop.
Attached arch_main.c can work except for the sometimes inconsistency of address and data.
For example, according to application logic, if we update in this way:
ADDR DATA
xx:xx:xx:xx:xx:00 Info00
xx:xx:xx:xx:xx:01 Info01

we should get following:
ADDR DATA
xx:xx:xx:xx:xx:00 Info00
xx:xx:xx:xx:xx:01 Info01

In fact, we sometimes get following unexpected result:
ADDR DATA
xx:xx:xx:xx:xx:01 Info00

We think, the advertising address update (through writing register BLE_BDADDRL_REG and BLE_BDADDRU_REG) can complete immediately,
the advertising data update (through GAPM_UPDATE_ADVERTISE_DATA message) is delayed or not synchronized with the advertising procedure.

Although the example ble_app_noncon in SDK 6 can implement our function without inconsistency, the cost seems high, we want to update anything in main loop to reduce current consumption.

So, is there any other way to update safely?

Thanks in advance!

Best Regards,
Peter

----------------------------------- arch_main.c ---------------------------------------------
...
uint8_t fly_update_count __attribute__((section("retention_mem_area0"), zero_init));

extern void adv_addr_update(void); /* Update advertising device address */
extern void adv_data_update(void); /* Update advertising data */
....

int main(void)
{
sleep_mode_t sleep_mode;

// initialize retention mode
init_retention_mode();

//global initialise
system_init();

/*
************************************************************************************
* Platform initialization
************************************************************************************
*/

while(1)
{
{做
// schedule all pending events
根据dule_while_ble_on();
}
while (app_asynch_proc() != GOTO_SLEEP); //grant control to the application, try to go to power down
//if the application returns GOTO_SLEEP

// Update in here !!!
fly_update_count++;
if ((fly_update_count%50) == 0)
{
adv_addr_update();
adv_data_update();
}

...

//wait for interrupt and go to sleep if this is allowed
if (((!BLE_APP_PRESENT) && (check_gtl_state())) || (BLE_APP_PRESENT))
{
//Disable the interrupts
GLOBAL_INT_STOP();

app_asynch_sleep_proc();

// get the allowed sleep mode
// time from rwip_power_down() to WFI() must be kept as short as possible!!
sleep_mode = rwip_power_down();

if ((sleep_mode == mode_ext_sleep) || (sleep_mode == mode_ext_sleep_otp_copy))
{
//power down the radio and whatever is allowed
arch_goto_sleep(sleep_mode);

// In extended sleep mode the watchdog timer is disabled
// (power domain PD_SYS is automatically OFF). Although, if the debugger
// is attached the watchdog timer remains enabled and must be explicitly
// disabled.
if ((GetWord16(SYS_STAT_REG) & DBG_IS_UP) == DBG_IS_UP)
{
wdg_freeze(); // Stop watchdog timer
}

//wait for an interrupt to resume operation
WFI();

//resume operation
arch_resume_from_sleep();
}
else if (sleep_mode == mode_idle)
{
if (((!BLE_APP_PRESENT) && check_gtl_state()) || (BLE_APP_PRESENT))
{
//wait for an interrupt to resume operation
WFI();
}
}
// restore interrupts
GLOBAL_INT_START();
}
wdg_reload(WATCHDOG_DEFAULT_PERIOD);
}
}