你好,
我有DA14580开发板，我试图运行“blinky”测试应用与Keil MDK。
我面临以下错误122在命令窗口:
运行代码大小限制:32K
将JLink项目文件设置为“C:\Users\ALMA1090004\Documents\SDK 5.0.4\SDK 5.0.4 _devkt - pro \SDK 5.0.4\DA1458x_SDK_5.0.4\DA1458x_SDK\5.0.4\projects\target_apps\peripheral_examples\blinky\Keil_5\JLink settings .ini”* JLink Info: Device“cortexm0”selected。
JLink信息:
------------
DLL: V5.12e，编译Apr 29 2016 15:03:58
固件:J-Link OB-SAM3U128 V1编译于2016年3月29日18:48:55
硬件:V1.00
S / N: 480067800
* JLink Info: Found SWD-DP with ID 0x0BB11477
* JLink Info: Found Cortex-M0 r0p0, Little endian。
* JLink Info: FPUnit: 4代码(BP)槽和0文字槽
* JLink信息:CoreSight组件:
* JLink Info: ROMTbl 0 @ E00FF000
* JLink Info: ROMTbl 0 [0]: FFF0F000, CID: B105E00D, PID: 000BB008 SCS
* JLink Info: ROMTbl 0 [1]: FFF02000, CID: B105E00D, PID: 000BB00A DWT
* JLink Info: ROMTbl 0 [2]: FFF03000, CID: B105E00D, PID: 000BB00B FPB
ROMTableAddr = 0 xe00ff000
目标信息:
------------
设备:ARMCM0
VTarget = 3.300 v
引脚状态:TCK: 0, TDI: 1, TDO: 1, TMS: 1, TRES: 1, TRST: 1
Hardware-Breakpoints: 4
Software-Breakpoints: 8192
监测点:2
JTAG速度:5000 kHz
C:\\SDK 5.0.4\\SDK 5.0.4 _devkt - pro \\SDK 5.0.4\\DA1458x_SDK_5.0.4\\DA1458x_SDK\\ projects\\target_apps\\peripheral_examples\\blinky\\Keil_5\\out\ blinky.axf"
***限制版本与32768字节码大小限制
***目前使用:3276字节(9%)
**JLink Warning: misaligned memory write: Address: 0x20000000, NumBytes: 3276, Alignment: 2(半字对齐)
**JLink Warning: misaligned memory read: Address: 0x000000C0, NumBytes: 60, Alignment: 2(半字对齐)
**JLink Warning: misaligned memory read: Address: 0x000000C0, NumBytes: 60, Alignment: 2(半字对齐)
**JLink Warning: misaligned memory read: Address: 0x000000C0, NumBytes: 60, Alignment: 2(半字对齐)
**JLink Warning: misaligned memory read: Address: 0x000000C2, NumBytes: 2, Alignment: 2(半字对齐)
**JLink Warning: misaligned memory read: Address: 0x000000C2, NumBytes: 2, Alignment: 2(半字对齐)
**JLink Warning: misaligned memory read: Address: 0x000000C2, NumBytes: 2, Alignment: 2(半字对齐)
**JLink Warning: misaligned memory read: Address: 0x000000C4, NumBytes: 60, Alignment: 2(半字对齐)
**JLink Warning: misaligned memory read: Address: 0x000000C4, NumBytes: 60, Alignment: 2(半字对齐)
**JLink Warning: misaligned memory read: Address: 0x000000C4, NumBytes: 60, Alignment: 2(半字对齐)
**JLink Warning: misaligned memory read: Address: 0x000000C6, NumBytes: 2, Alignment: 2(半字对齐)
**JLink Warning: misaligned memory read: Address: 0x000000C6, NumBytes: 2, Alignment: 2(半字对齐)
**JLink Warning: misaligned memory read: Address: 0x000000C6, NumBytes: 2, Alignment: 2(半字对齐)
***错误122:AGDI:内存读取失败(0x000000C6)
TeraTerm窗口也没有按照预期出现。
请建议。
谢谢你！
minor-latin;mso-bidi-theme-font:minor-latin;background:white;mso-ansi-language:
EN-US">嗨nabilahderes,
minor-latin;mso-bidi-theme-font:minor-latin;background:white;mso-ansi-language:
EN-US">请试着推断出路径-例如:
minor-latin;mso-bidi-theme-font:minor-latin;background:white;mso-ansi-language:
EN-US">c: \ myWorkshop \ DA1458x_SDK \ 5.0.4 \ \ target_apps \作品peripheral_examples \ \项目
minor-latin;mso-bidi-theme-font:minor-latin;background:white;mso-ansi-language:
EN-US">同时，请尝试禁用代码中设置的所有断点
minor-latin;mso-bidi-theme-font:minor-latin;border:none windowtext 1.0pt;
mso-border-alt:none windowtext 0cm;padding:0cm;background:white;mso-ansi-language:
EN-US">谢谢,PM_Dialog mso-ascii-theme-font:minor-latin;mso-hansi-theme-font:minor-latin;mso-bidi-theme-font:
minor-latin;background:white;mso-ansi-language:EN-US">
我尝试了这两种建议，但还是犯了同样的错误
minor-latin;mso-bidi-theme-font:minor-latin;border:none windowtext 1.0pt;
mso-border-alt:none windowtext 0cm;padding:0cm;background:white;mso-ansi-language:
EN-US">嗨nabilahderes,
minor-latin;mso-bidi-theme-font:minor-latin;border:none windowtext 1.0pt;
mso-border-alt:none windowtext 0cm;padding:0cm;background:white;mso-ansi-language:
EN-US">如果你只有blinky的例子有这个问题，请告诉我好吗?你试过运行SDK的其他项目吗?还有，你有没有改变Keil的配置?
minor-latin;mso-bidi-theme-font:minor-latin;border:none windowtext 1.0pt;
mso-border-alt:none windowtext 0cm;padding:0cm;background:white;mso-ansi-language:
EN-US">谢谢,PM_Dialog
我也尝试了其他项目(例如I2C_eeprom)。同样的错误发生。我不改变任何构型。我使用默认配置。
嗨nabilahderes,
尝试在一个新的推导路径文件夹中解压缩SDK，然后重新安装Keil工具和JLink。之后，尝试构建项目。你能正确地构建它们吗?请注意，我不能复制您的出版物，所以请尝试这个，并让我知道。
谢谢,PM_Dialog