Hi Dialog, I was wondering about ordering parts. Where can I get them (I need only 10-15 parts for my first prototypes)? How do I get a part with my required startup values for the LDOs and DCDCs? Thanks! Earl
We can supply you with either blank samples or samples that have been programmed with a standard variant. If we supply you with a sample of blank chips, you will need a way of programming them; do you have an evaluation board with a socket daughter board? If you are planning on using the DA9063 with a platform/SoC, then a standard variant may be available, I would recommend looking through our application notes that corresponds with the platform you are using, there should be information of the required variant.
Hi Elliott, Thanks. The system I am working with is based on the iMX6 family but due to the shared- and peripheral power rails it looks quite different from the systems shown in your application notes. How can I get an evaluation board with a socket and the blank samples? Thanks! Earl
In this case I would recommend an Evaluation Board with a socket daughter board and then programming the blank chips. The order number is 44-179- 176-01-A; this is listed EVAL 1 and EVAL 6 on the AVNET online sales store.
Hello Earl,
We can supply you with either blank samples or samples that have been programmed with a standard variant. If we supply you with a sample of blank chips, you will need a way of programming them; do you have an evaluation board with a socket daughter board? If you are planning on using the DA9063 with a platform/SoC, then a standard variant may be available, I would recommend looking through our application notes that corresponds with the platform you are using, there should be information of the required variant.
Kind Regards,
Elliott Dexter
Hi Elliott,
Thanks. The system I am working with is based on the iMX6 family but due to the shared- and peripheral power rails it looks quite different from the systems shown in your application notes. How can I get an evaluation board with a socket and the blank samples?
Thanks!
Earl
Hello Earl,
In this case I would recommend an Evaluation Board with a socket daughter board and then programming the blank chips. The order number is 44-179- 176-01-A; this is listed EVAL 1 and EVAL 6 on the AVNET online sales store.
.
Order Page for the 44-179- 176-01-A / EVAL 1:
https://www.avnet.com/shop/us/p/kits-and-tools/development-kits/dialog-semiconductor/da9063-eval1-3074457345630156329/
对话框DA9063evaluation board ordering information:
//www.wsdof.com/sites/default/files/da9063_evaluation_boards_order_info_rev1v2_0.pdf
Kind Regards,
Elliott Dexter