连接经理崩溃

Hello Labatsch，我会要求Pansonic团队回答你的问题。

BR JE_Dialog

您好Iawatsch，目前连接经理是我们可以提供的最简单的演示。但很快就会有串口服务的演示应用程序。看看参考设计。在那里，您可以下载SPS。
此致，
ingo.

I have a similar problem:

- PAN1740 module is connected to a Windows 7 PC
- In the Connection Manager boots up a peripheral fine (with the default firmware)
- 主机PC（另一个）具有Broadcom BCM 20702 Battle USB加密狗安装
- 主机看到Pan1740并准备配对。
- The Connection Manager crashes when I send a pairing request from the host

Another problem:

- I have a compiled SPS firmware hex (working) but when I tried to load it via the Connection Manager nothing happened
- The firmware works if uploaded by Smart Snippets but I don't see how can I pair there

So my question:

- how can I upload the new SPS profile/firmware into the 1740 and pair it with the host PC?

我对项目有点新手，所以你的帮助将受到极大的赞赏。

Thanks in advance.

嗨imalamoud，你可以使用the proximity reporter example instead. There you have a profile already inside. Maybe the Broadcom stack expects this and that causes the connection manager to crash.
Another problem: You need to use e.g. Hyperterminal on both sides if you want to connect two PAN1740 from one PC to the other.

祝圣诞节快乐，新年快乐，
ingo.

我们有同样的问题。When we use Connection Manager and boot our DA14580 as peripheral, start advertising, connect from a remote device and request bonding from the remote device, Connection Manager crashes (something with an error in the hci_lib.dll file).

I notice that the last message in the log before crashing is a message with msg id GAP_BOND_REQ_IND but the name of the message according to RW-BLE-GAP-IS is GAPC_BOND_REQ_IND. Can that be the cause of the crash?

Hello Ingo,

Thank you for your reply.

It does not look that it depends on the host dongle. We tried both Broadcomm and Qualcomm Atheros. Same result. I also tried to load SPS firmware from the Dialog example.
gap_bond_req_ind到达Connection Manager并崩溃。

如果我使用keil运行sps示例，它运行mine和dsps示例Android应用程序可以交换数据。但是如何与凯尔的加密狗配对？智能片段相同。

Our requirement is to obtain measurement data from a remote module and process it in Windows. We considered SPS as the most suitable profile. Any other profile you could recommend?

Hello Ingo,

Another question: Suppose we would like to manufacture pairs device-dongle based on PAN1740 ourselves. They would use SPS or cable profile.
How do we program pairing in pairs during production? It could be not rigid pairing as well.

Hello Imalamoud, the connection manager is not thought to run with the DSPS profile. You need to use a Hyperterminal. It is decribed how to pair in the UM-B038 you can fin under ref Designs here in the site. It also works with the PAN1740 USB dongles.
Regarding programming I understand you want to program paralel two PAN1740 at the same time, or do I misunderstand?

Hi,

I am using Connection Manager tool for RF testing of DA14583, Where it carshes once the firmware is loaded and i press to "Boot Test Mode", due to this my complete system also get's restarted.

Can you please help me out here, also would like to have latest connection manager tool to avoid this crashes.