Hi Dialog
I am now using the dsps project.
I am modifying the sample program.
I want to send specific character string data from PC to da14580, and check whether the data can be transmitted using wireless application.
Q1.Is there a sampler code that sends specific character string data?
Q2.I think that my image stores character string data in the buffer and transmits the data as wireless data,
Is my thinking correct?
Thank you Dialog Team
Keywords:
Device:
Hi Kaito,
Q1: There is no sampler program provided by dialog, you can hook up a terminal on your PC and start sending data from the connected end, periodically.
Q2: You mean about the DSPS functionallity ? It gets the data from the UART stores the data in a buffer and when there's a connection event the data are send to the other side of the connection.
Thanks MT_dialog
Hi Dialog
Thank you for your answer
I want to transfer from typeZY to PC(MAC)
when i check whether the data is transfering or not in the PC(MAC), i use app called LightBlue
but i can't transfer the data from typeZY to PC(MAC)
where i modify the code?
i modify it as below
void user_ble_pull (bool init, bool success)
{
bool send_flow_on = false;
static bool tx_busy_flag = false;
static uint8_t rounds_waiting=0;
静态uint16_t长度;
if (init)
{
if(!tx_busy_flag)
{
if((length = user_buffer_item_count(&periph_to_ble_buffer)) > 0)
if (length > TX_WAIT_LEVEL || (rounds_waiting++) >= TX_WAIT_ROUNDS)
{
//uint8_t *p_data = NULL;
uint8_t *p_data = "BLE_TEST";
长度= 10;
rounds_waiting = 0;
tx_busy_flag = true;
length = (length > TX_SIZE ? TX_SIZE : length);
length = (length < TX_START_FRAME_DATA_SIZE ? length : (((length - TX_START_FRAME_DATA_SIZE) / TX_CONTINUE_FRAME_DATA_SIZE) * TX_CONTINUE_FRAME_DATA_SIZE + TX_START_FRAME_DATA_SIZE));
length = user_buffer_read_address(&periph_to_ble_buffer, &p_data, TX_SIZE);
user_send_ble_data(p_data, length);
//user_send_ble_data("DSPS_HOST", 10);
//user_send_ble_data("DSPS_PULLDATA", 20, conidx);
}
}
}
else
{
tx_busy_flag = false;
if (success)
user_buffer_release_items(&periph_to_ble_buffer, length);
if((length = user_buffer_item_count(&periph_to_ble_buffer)) > TX_WAIT_LEVEL)
{
// uint8_t *p_data = NULL;
uint8_t *p_data = "BLE_TEST";
长度= 10;
rounds_waiting = 0;
tx_busy_flag = true;
length = (length > TX_SIZE ? TX_SIZE : length);
length = (((length - TX_START_FRAME_DATA_SIZE) / TX_CONTINUE_FRAME_DATA_SIZE) * TX_CONTINUE_FRAME_DATA_SIZE + TX_START_FRAME_DATA_SIZE);
length = user_buffer_read_address(&periph_to_ble_buffer, &p_data, TX_SIZE);
user_send_ble_data(p_data, length);
//user_send_ble_data("DSPS_PULLDATA", 20, conidx);
//user_send_ble_data("DSPS_HOST", 10);
}
}
/ /检查缓冲区是否most empty and send XON if neccesary
send_flow_on = user_check_buffer_almost_empty(&periph_to_ble_buffer);
//if XON should be send, make sure it's send as soon as possible
if(send_flow_on)
{
uart_sps_flow_on();
}
}
I wanted to specify the character data contained in pdata and want to display the character data on the application
the project's name is sps_device.
Thank you Dialog
Hi Kaito,
If you use a generic BLE application and you have properly configured the device and you have enabled the notifications then you might be able to operate the DSPS, and see the characteristics updated on your phone, but i would suggest using the DSPS android/iOS application since when the two devices are connected the central sends also a write request in order to set the corresponding characteristic for the flow control on the peripheral, so i would suggest using the app instead of a generic application. Also if you would like to send some static data to the application of the PC i would suggest to use a timer and push data using the user_send_ble_data() function.
Thanks MT_dialog
Hello dialog.
thank you for your reply.
Now I am doing data transmission using an application called iphone 's DSPS in the program I showed last time.
However, I am transmitting the character string "BLE_TEST" from the PC via BT, but I can not confirm the data.
i
i can send data from iphone to teraterm on PC.
How can I send data from PC to iphone?
I am worrying about my failure, so please teach me.
Hi Kaito,
If i understand the problem correctly, you are not able to see data transmitted from the PC to your phone, if that is the case check the terminal that you are using and make sure that you have the proper baudrate and if you have properly configured the hw flow control (on the terminal) and also at the side of the dev kit. Have you followed the UM-B-038 da14580 Serial Port Service Reference application ? and have you applied the proper wiring in order for the hw flow control to work ?.
Thanks MT_dialog