What does this mean: invalid announcement message received (-106)

Hello,

I'm a linux user and a command line junky, sorry for that :-)

I have done a new design using the DA14680 chip (01F08). Now I am trying to get the new hardware up and running.
First step connect the serial port and if I connect a terminal program to /dev/ttyUSB0 and do a RESET, I get
DA14680AE
DA14680AE
so the serial connection is fine.

Next I configured a sample project from the SDK [projects/dk_apps/features/ble_peripheral/] (it compile without errors) and now I would like to get it programmed.
To do that I issued the command:
>> cli_programmer --prod-id DA14681-01 /dev/ttyUSB0 write_qspi_exec prog.bin

cli_programmer 1.23
Copyright (c) 2016 Dialog Semiconductor
配置从cli_programmer.ini file loaded.
Using serial port /dev/ttyUSB0 at baud rate 57600.
Connecting to device...
Setting serial port baud rate to 57600.
Press RESET.
Uploading boot loader/application executable...
Executable uploaded.
Setting serial port baud rate to 57600.
Write executable failed: invalid announcement message received (-106)


Now I am stuck on theinvalid announcement message received (-106)message.
What does this mean?
Where can I look for the answer?

I have tried --prod-id DA14680-01, same error.
- uartboot is compile in release mode.
- cli_program is newly compiled using static_linux
- application is compiled in release mode

This is the cli_programmer.ini

;This is a cli_programmer configuration file.
[cli]
initial_baudrate = 57600
超时= 5000
bootloader_fname = /path/to/uartboot/DA1468x_SDK_BTLE_v_1.0.8.1050.1/sdk/bsp/system/loaders/uartboot/Release/uartboot.bin
[uartboot]
baudrate = 57600
tx_port = 1
tx_pin = 3
rx_port = 2
rx_pin = 3
[gdb server]
port = 2331
host_name = localhost
gdb_server_path =
stop_prv_gdb_server = 1
[bin2image]
chip_rev = DA14681-01
enable_uart = y
ram_shuffling = 0
[target reset]
target_reset_cmd =