连接管理器

嗨，泽娜，不幸的是，我们现在只有一个版本的连接管理器可用。

BR JE_Dialog

你好,

about this theme, I am testing the DA14580 board with the proximity report application and the Connection Manager(using BTLE/USB Dongle). At the first I connect the USB Dongle and start the Connection Manager, then its detected the J-Link CDC UART in the Connection Manager and the verification and script proccess are succesfullly. Then I select "Boot as Central" to conect with DA14580, I scan the devices but in the Address list there are any Address(device) to establish Link. That it ocurred with the version 2.0.4 und I have seen a newer version in the Webpage (3.0.4) then I have installed und I done the same process. Now when I select "Boot as Central" the software doesn't do anything, therefore , It shows any Tab to scan devices.
Then I would like know, if that is an error or I am doing some bad?

谢谢

Jvp

@ zmakki9:

yes, you can.
连接管理器should be started in Central mode, and in the window you then can see the packets received, e.g. when pressing a key.

致以最诚挚的问候，BBèu Dialog，

Dialog BLE Support Team.

@ DesignExt,

在连接管理器中，您应该从/bin/firmware\u upload/文件夹加载文件“full\u emb.hex”（加载固件）。

Choose the lowest Com port number of the UART com port pair. 'Flow Control' set to 'None'.

加载软件并按“引导为中心”后，左窗格应显示连接间隔等的选项和设置。

致以最诚挚的问候，BBèu Dialog，Dialog BLE Support Team.

你好，BBU对话，

谢谢你的回答。我也这么做了。在上一版本（2.0.4）加载SW并按下“Boot as Central”后，在左侧面板显示所有扫描选项。但是在升级到3.0.4版本之后，我已经加载了SW，将flow Control设置为None，并按“Boot as Control”，但是我收到了任何消息，左面板在开始时是相同的（ohne options connnections）。

best regards,

Jvp

Hello DesignExt,

I'm sorry to hear it's not working for you.

Did you try another USB port - preferably one directly at your PC, not via an external hub?
Did you try to unplug and plug in again?

如果这不成功，我会把你的问题提交给工具开发团队。

致以最诚挚的问候，BB\U对话，后勤支持团队

Hello CristiPop,

I don't know. This was not fed back to us.
In general when facing this issue, following things mostly solved the Conn.Manager issues:

-尝试另一个USB端口（例如非USB3端口）。

-选择适当的UART Com端口（UART对中的较低数字）。

- set Hardware Flow control to 'None'.

- take care to use the right GPIO's of the DA14580. On our eval.kits and in the SDK these are defined to P0_4 and P0_5.

Best regrds, BB_Dialog.

I've got the EVAL_PAN1740 Development kit with a couple USB dongles with the DA14580 on them.
I seem to be having a related problem. I'm using Connection Manager 3.0.6. Here's the startup text, which is also what happens when I try to "Load Firmware...":

hex2bin v1.0.10，版权所有（C）2012 Jacques Pelletier&contributors
Lowest address = 00000000
Highest address = 000034E7
Pad Byte = FF
8-bit Checksum = 30

工具目录：C:\Program Files（x86）\ConnectionManager\bin\firmware\u upload\
Using HEX file: "C:\Program Files (x86)\ConnectionManager\bin\firmware_upload" "full_emb.hex"

--- Generated JLink Script File ---

SEGGER J-Link Commander V4.72 ('?' for help)
Compiled Jun 12 2013 15:47:30
未知的命令行选项loadbin.txt。

Okay, so do I have an incompatible J-Link Commander version? When I try to "Boot as Central", nothing happens, presumably because no firmware is loaded.

I can download and debug code using Keil, and I have some limited success using SmartSnippets, but the Connection Manager has been a problem.

Hi dsuilmann,

sorry for late answer.
可能是固件上传文件夹中缺少hex2bin.exe程序吗？
Or old version?
The recent version is dated 26-09-2014 (14:22 Hrs) and size is 54.2 KB.
The JLINK.exe has the same date.

The loadbin.txt file should contain the following or similar:

r
w2 50000012, A6
W2 50003308, 2e
loadbin "full_emb.bin", 0
verifybin "full_emb.bin", 0
r
g
exit

Following should be be written in the Log window:

--- Generated JLink Script File ---
r
w2 50000012, A6
W2 50003308, 2e
loadbin "full_emb.bin", 0
verifybin "full_emb.bin", 0
r
g
exit
---
SEGGER J-Link Commander V4.72 ('?' for help)
Compiled Jun 12 2013 15:47:30
脚本文件读取成功。
DLL版本V4.72，编译时间：2013年6月12日15:47:08
Firmware: J-Link ARM Lite V8 compiled Jul 8 2013 18:37:55
硬件：V8.00
etc.

Best regards, BB_Dialog

谢谢! That was it... the firmware_upload folder had no loadbin.txt for some reason. It was in a path under "my documents".

Hello,
Is there a Connection_manager exe file for WIndows-64bit ---Windows-7?

谢谢
asm

Hi There, we only have the 32 bit, but it runs just fine on Windows 7 (64 bit). Windows i believe has built in emulator (seamless) which enables 32 apps to run on 64 platforms.

BR JE_Dialog