Dual Supply GreenPAK™
Mixed-signal Matrix Devices
高度通用的NVM可编程混合信号矩阵设备
Designed to flexibly interface two independent voltage domains using the programmable logic, timing, and analog components available on all GreenPAK family devices.
GreenPak系列的这些成员可以轻松地将级别转换功能添加到个人设计中实现的功能集。可以灵活地从较高电压域到较低电压域或另一个方向进行水平转换。
Developing Dual Supply GreenPAK projects is made simple with the easy-to-use GreenPAK development hardware and simple GUI interface of GreenPAK Designer, allowing our customers to quickly and easily implement new designs and respond to changing requirements.
最简单的用例这个家庭我的设备s making a direct connection to transmit signals across two voltage domains. In figure 1 below, the I/O pins which connect to the primary supply voltage (Vdd) are highlighted in blue, and the I/O pins connected to the lower voltage supply (Vdd2) are highlighted in gold. Making a direct wire connection, as is shown here, will allow a signal to pass from Pin 16 on the Vdd2 domain to Pin 3 on the Vdd domain.
Figure 1. Simple Dual Supply Implementation
It is also possible to enable signals to selectively pass one direction or the other, under control of another signal. An example of this is shown in Fig 2 below, where a signal can either originate in Pin 3 or Pin 16, with the direct selected based on the state of Pin 4.
图2.双电源GreenPak实施
Stay connected
Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.
Inquiries 经销商和代表 Register for newsletters| PN | Special Feature | GPIO | Nominal VDD (V) |
ACMP | DCMP/PWM | 最大限度。CNT/DLY | 最大限度。LUTs | 最大限度。达夫 | Pipe Delay |
Progr. DLY | osc. | Com. Interface | 包装尺寸（mm） | Socket | Documents |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SLG46127 | 2x P-FET | 6 | 1.8 - 5.0 | 2 | - | 4 | 10 | 4 | 8-stage | 1 | RC OSC | - | 1.6 x 2.0 mm | MSTQFN-16 (#1) | Documentation |
| SLG46580 | ASMLDO | 9 | 2.5 - 5.0 | 4 | - | 5 | 16 | 9 | 16-stage | 1 | Conf。osc.LP OSC | I²C | 2.0 x 3.0 mm | STQFN-20 (#3) | Documentation |
| SLG46582 | ASMLDO | 9 | 2.5 - 5.0 | 4 | - | 5 | 16 | 9 | 16-stage | 1 | Conf。osc.LP OSC | I²C | 2.0 x 3.0 mm | STQFN-20 (#3) | Documentation |
| SLG46583 | ASMLDO | 9 | 2.5 - 5.0 | 4 | - | 5 | 16 | 9 | 16-stage | 1 | Conf。osc.LP OSC | I²C | 2.0 x 3.0 mm | STQFN-20 (#3) | Documentation |
| SLG46585 | ASMLDODCDC | 9 | 2.5 - 5.0 | 4 | - | 5 | 16 | 9 | 16-stage | 1 | Conf。osc.LP OSC | I²C | 3.0 x 3.0 mm | MSTQFN-29（＃1） | Documentation |
| SLG46533 | - | 18 | 1.8 - 5.0 | 4 | - | 7 | 25 | 15 | 16-stage | 1 | Conf。osc.Ring OSCCrystal OSC | I²C | 2.0 x 2.2 mm 2.0 x 3.0 mm |
MSTQFN-22（＃1）STQFN-20 (#1) | Documentation |
| SLG46538 | ASMDual Supply | 17 | 1.8 - 5.01.8 - VDD1 | 4 | - | 7 | 17 | 8 | 16-stage | 1 | Conf。osc.RC OSCCrystal OSC | I²C | 2.0 x 3.0 mm 2.0 x 2.2 mm |
STQFN-20 (#2)MSTQFN-22（＃2） | Documentation |
| SLG46538-A | ASMDual Supply | 17 | 1.8 - 5.01.8 - VDD1 | 4 | - | 7 | 17 | 8 | 16-stage | 1 | Conf。osc.RC OSCCrystal OSC | I²C | 3.5 x 3.5 mm | TQFN-20 | Documentation |
| SLG46537 | ASM | 18 | 1.8 - 5.0 | 4 | - | 7 | 17 | 8 | 16-stage | 1 | Conf。osc.RC OSCCrystal OSC | I²C | 2.0 x 3.0 mm 2.0 x 2.2 mm |
STQFN-20 (#1)MSTQFN-22（＃1） | Documentation |
| SLG46536 | - | 12 | 1.8 - 5.0 | 3 | - | 7 | 25 | 15 | 16-stage | 1 | Conf。osc.Ring OSCCrystal OSC | I²C | 2.0 x 2.2 mm | STQFN-14（＃2） | Documentation |
| SLG46535 | ASMDual Supply | 11 | 1.8 - 5.01.8 - VDD1 | 3 | - | 7 | 17 | 8 | 16-stage | 1 | Conf。osc.Ring OSCCrystal OSC | I²C | 2.0 x 2.2 mm | STQFN-14（＃3） | Documentation |
| SLG46534 | ASM | 12 | 1.8 - 5.0 | 3 | - | 7 | 17 | 8 | 16-stage | 1 | Conf。osc.RC OSCCrystal OSC | I²C | 2.0 x 2.2 mm | STQFN-14（＃2） | Documentation |
| SLG46170 | - | 12 | 1.8 - 5.0 | - | - | 8 | 17 | 6 | 16-stage | 1 | RC OSC | - | 2.0 x 2.2 mm | STQFN-14（＃2） | Documentation |
| SLG46169. | - | 12 | 1.8 - 5.0 | 2 | - | 7 | 18 | 6 | 16-stage | 1 | RC OSC | - | 2.0 x 2.2 mm | STQFN-14（＃2） | Documentation |
| SLG46108 | - | 6 | 1.8 - 5.0 | - | - | 4 | 10 | 4 | 8-stage | 1 | RC OSC | - | 1.0 x 1.2 mm | STQFN-8 (#1) | Documentation |
| SLG46121 | Dual Supply | 9 | 1.8 - 5.01.8 - VDD1 | 2 | - | 4 | 16 | 8 | 8-stage | 1 | RC OSC | - | 1.6 x 1.6 mm | STQFN-12 (#2) | Documentation |
| SLG46621 | Dual Supply8-bit ADC | 17 | 1.8 - 5.01.8 - VDD1 | 6 | 3/3 | 10 | 26 | 12 | 16-stage 2 | 2 | LF OSCRing OSCRC OSC | SPI | 2.0 x 3.0 mm | STQFN-20 (#2) | Documentation |
| SLG46620 | 8-bit ADC | 18 | 1.8 - 5.0 | 6 | 3/3 | 10 | 26 | 12 | 16-stage 2 | 2 | LF OSCRing OSCRC OSC | SPI | 2.0 x 3.0 mm 6.5 x 6.4 mm |
STQFN-20 (#1)TSSOP-20 (#1) | Documentation |
| SLG46620-A | 8-bit ADC | 18 | 1.8 - 3.3 | 6 | 3/3 | 10 | 26 | 12 | 16-stage 2 | 2 | LF OSCRing OSCRC OSC | SPI | 6.5 x 6.4 mm | TSSOP-20 (#1) | Documentation |
| SLG46117 | 1x P-FET | 7 | 1.8 - 5.0 | 2 | - | 4 | 10 | 4 | 8-stage | 1 | RC OSC | - | 1.6 x 2.5 mm | STQFN-14（＃1） | Documentation |
| SLG46116 | 1x P-FET | 7 | 1.8 - 5.0 | 2 | - | 4 | 10 | 4 | 8-stage | 1 | RC OSC | - | 1.6 x 2.5 mm | STQFN-14（＃1） | Documentation |
| SLG46140 | 8-bit ADC | 12 | 1.8 - 5.0 | 2 | 3/3 | 4 | 16 | 6 | 16-stage | 1 | LF OSCRing OSCRC OSC | SPI | 1.6 x 2.0 mm | STQFN-14（＃1） | Documentation |
| SLG46120 | - | 10 | 1.8 - 5.0 | 2 | - | 4 | 16 | 8 | 8-stage | 1 | RC OSC | - | 1.6 x 1.6 mm 2.0 x 2.0 mm |
STQFN-12 (#1) | Documentation |
| SLG46110 | - | 8 | 1.8 - 5.0 | 2 | - | 4 | 10 | 4 | 8-stage | 1 | RC OSC | - | 1.6 x 1.6 mm | STQFN-12 (#1) | Documentation |
| SLG46722 | - | 18 | 1.8 - 5.0 | - | - | 8 | 17 | 6 | 16-stage | 1 | RC OSC | - | 2.0 x 3.0 mm | STQFN-20 (#1) | Documentation |
| SLG46721 | - | 18 | 1.8 - 5.0 | 4 | - | 7 | 18 | 6 | 16-stage | 1 | RC OSC | - | 2.0 x 3.0 mm | STQFN-20 (#1) | Documentation |
| SLG46824 | In-System ProgrammabilityDual Supply | 17 | 2.5 - 5.01.8 - VDD1 | 2 | - | 8 | 19 | 17 | 16-stage | 1 | RC OSCLP OSCRing OSC | I²C | 2.0 x 3.0 mm 6.5 x 6.4 mm |
STQFN-20 (# 4)TSSOP-20（＃2） | Documentation |
| SLG46826 | In-System ProgrammabilityDual Supply | 17 | 2.5 - 5.01.8 - VDD1 | 4 | - | 8 | 19 | 17 | 16-stage | 1 | RC OSCLP OSCRing OSC | I²C | 2.0 x 3.0 mm 6.5 x 6.4 mm |
STQFN-20 (# 4)TSSOP-20（＃2） | Documentation |
| SLG46827-A | In-System DebugDual Supply | 17 | 2.5 - 5.01.8 - VDD1 | 4 | - | 8 | 19 | 17 | 16-stage | 1 | RC OSCLP OSCRing OSC | I²C | 6.5 x 6.4 mm | TSSOP-20（＃2） | Documentation |
| SLG46880 | ASMDual Supply | 28 | 2.5 - 5.02.5 - VDD1. | 4 | - | 5 | 12 | 5 | 16-stage | 1 | RC OSCLP OSCRing OSCCrystal OSC | I²C | 4.0 x 4.0 mm | STQFN-32 (#1) | Documentation |
| SLG46881 | ASMDual Supply | 28 | 2.5 - 5.01.0 - 1.8 | 4 | - | 5 | 12 | 5 | 16-stage | 1 | RC OSCLP OSCRing OSCCrystal OSC | I²C | 4.0 x 4.0 mm | STQFN-32 (#1) | Documentation |
| SLG46517 | ASM2x P-FET | 16 | 1.8 - 5.0 | 4 | - | 7 | 17 | 8 | 16-stage | 1 | RC OSCRing OSCCrystal OSC | I²C | 2.0 x 3.0 mm | MSTQFN-28 (#1) | Documentation |
| SLG46855 | - | 12 | 2.5 - 5.0 | 4 | - | 8 | 23 | 21 | 16-stage | 1 | RC OSCLP OSCRing OSC | I²C | 1.6 x 2.0 mm | STQFN-14（＃1） | Documentation |
| SLG46855-A. | - | 12 | 2.5 - 5.0 | 4 | - | 8 | 23 | 21 | 16-stage | 1 | RC OSCLP OSCRing OSC | I²C | 3.0 x 3.0 mm | FCQFN-14（＃1） | Documentation |
| SLG46867 | 2x P-FET | 10 | 2.5 - 5.0 | 4 | - | 8 | 23 | 21 | 16-stage | 1 | RC OSCLP OSCRing OSC | I²C | 1.6 x 3.0 mm | MSTQFN-20 (#1) | Documentation |
| SLG47105 | Dual Supply4 Half- / 2 Full- bridgesI/V Regulation | 84 x HV | 2.5 - 5.03.3 - 12.0 | 2 | 0/2 | 5 | 17 | 15 | 16-stage | 1 | LP OSCRing OSC | I²C | 2.0 x 3.0 mm | STQFN-20 (#5) | Documentation |
| SLG47004 | Op AmpDigital RheostatAnalog SwitchAuto TrimIn-System Programmability | 8 | 2.5 - 5.0 | 3 | 0/0 | 7 | 20 | 18 | 16-stage | 1 | RC OSCLP OSCRing OSC | I²C | 3.0 x 3.0 mm | STQFN-24（＃1） | Documentation |
| SLG88103 | Op Amp | 0 | 1.8 - 5.0 | 0 | 0/0 | 0 | 0 | 0 | - | 0 | - | - | 2.0 x 2.0 mm | STDFN-10 | Documentation |
| SLG88104 | Op Amp | 0 | 1.8 - 5.0 | 0 | 0/0 | 0 | 0 | 0 | - | 0 | - | - | 2.0 x 3.5毫米 | STQFN-20 | Documentation |
| SLG46811 | 92 x 8 bit pattern generator | 10 | 2.5 - 5.0 | 1（4） | 0/0 | 6 | 18 | 17 | 4 x 8-bit Sh Reg | 1 | Ring OSC LP OSC |
I²C | 1.6 x 1.6 mm | STQFN-12 (#1) | Documentation |
Stay connected
Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.
Inquiries 经销商和代表 Register for newslettersStay connected
Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.
Inquiries 经销商和代表 Register for newsletters| Part Number | 描述 | 包裹 | Documentation |
|---|---|---|---|
| SLG4B41337V | Battery Saver for SteamVR Tracking Solution | STQFN-14（1.6 x 2.5毫米） | Documentation |
| SLG55021-200010V | High Voltage Gate Driver | TDFN-8 (2.0 x 2.0 mm) | Documentation |
| SLG5NT021-200000V | High Voltage Gate Driver | TDFN-8 (2.0 x 2.0 mm) | Documentation |
| SLG5NT026-200300V. | Dual Power Source Gate Driver | TDFN-8 (2.0 x 2.0 mm) | Documentation |
| SLG5NT1432V | Single N-Channel power switch | TDFN-8 (1.5 x 2.0 mm) | Documentation |
| SLG5NT1437V | Single N-Channel power switch | TDFN-8 (1.5 x 2.0 mm) | Documentation |
| SLG5NT1458V | Single N-Channel power switch | STDFN-8 (1.0 x 1.6 mm) | Documentation |
| SLG5NT1461V | Ultra-small 7.8 mΩ 6 A Load Switch with Discharge | TDFN 8 (1.5 x 2.0 mm) | Documentation |
| SLG5nt1462v. | Ultra-small Dual 40 mΩ 1.0 A Integrated Power Switch with Discharge | STDFN 8 (1.0 x 1.6 mm) | Documentation |
| SLG5nt1464v. | Ultra-small 40 mΩ 1.0 A GreenFET 3 Load Switch with Discharge | STDFN 4（1.0 x 1.0 mm） | Documentation |
| SLG5nt1477v. | NanopowerFET™: A 3 mm² fast turn on, 0.85 VD nano-power consumption power switch | TDFN-9 (1.5 x 2.0 mm) | Documentation |
| SLG5NT1487V. | Ultra-small 7.8 mΩ 5 A Load Switch with Discharge | TDFN 8 (1.5 x 2.0 mm) | Documentation |
| SLG5NT1533V | 1.6mm²快速开启电源开关，带电荷泵，0.85 VD，斜坡控制和输出放电1 V处理器电源控制 | STDFN-8 (1.0 x 1.6 mm) | Documentation |
| SLG5NT1546V | 超小型Dual 80MΩ1.0带有放电的集成电源开关 | STDFN-8 (1.0 x 1.6 mm) | Documentation |
| SLG5NT1547V | Ultra-small 80 mΩ, 1.0 A Integrated Power Switch with Discharge | STDFN 4（1.0 x 1.0 mm） | Documentation |
| SLG5NT1581V | 7.3MΩ，9个带有放电的Greenfet 3负载开关 | STDFN 14 (1.0 x 3.0 mm) | Documentation |
| SLG5NT1586V. | Ultra-small 22.5 mΩ 2.5 A Integrated Power Switch with Reverse Blocking | STDFN 8 (1.0 x 1.6 mm) | Documentation |
| SLG5NT1593V | Ultra-small 28.5 mΩ 1.0 A Integrated Power Switch with Discharge. Intel application notes on how to resolve a power sequencing failure:Intel® Curie™ Power Sequencing;Intel® Quark™ SE Microcontroller C1000 Power Sequencing Considerations | STDFN-4 (1.0 x 1.0 mm) | Documentation |
| SLG5NT1594V | 超小型28.5MΩ，1.0个集成电源开关 | STDFN 4（1.0 x 1.0 mm） | Documentation |
| SLG5NT1602V | 7.8 mΩ, 9 A Integrated Power Switch with Discharge and Reverse Current Blocking | STDFN 14 (1.0 x 3.0 mm) | Documentation |
| SLG5NT1611V | 一个超薄7.8Ω,9,单通道Integrated Power Switch with Reverse-current Blocking | STDFN 14 (1.0 x 3.0 mm) | Documentation |
| SLG5NT1734V | 超小型28.5MΩ，1.0带有放电的集成电源开关 | STDFN 4（1.0 x 1.0 mm） | Documentation |
| SLG5nth1011v. | A 22 V, 50 mΩ, 3 A Reverse Blocking Integrated Power Switch with VIN Lockout Select and MOSFET Current Monitor Output | STQFN-18 (1.6 x 3.0 mm) | Documentation |
| SLG7nt128v. | 1 Hz中断发生器 | TDFN-8 (2.0 x 2.0 mm) | Documentation |
| SLG7NT402V | Single N-Channel power switch | TDFN-8 (1.5 x 2.0 mm) | Documentation |
| SLG7NT4081V | PWROK Generator and Start Up Latching Circuit | TDFN-12 (2.5 x 2.5 mm) | Documentation |
| SLG7NT4082V | LED驱动器 | TDFN-12 (2.5 x 2.5 mm) | Documentation |
| SLG7NT4083V | 电源良好的探测器 | TDFN-12 (2.5 x 2.5 mm) | Documentation |
| SLG7NT4084V | LED Control | TDFN-8 (2.0 x 2.0 mm) | Documentation |
| SLG7NT408V | Ultra-small 7.8 mΩ, 4 A Integrated Power Switch | TDFN 8 (1.5 x 2.0 mm) | Documentation |
| SLG7NT4100V. | VR Enable and Discharge | TDFN-12 (2.5 x 2.5 mm) | Documentation |
| SLG7NT41021V | DDR序列仪和FET驱动器 | STQFN-20 (2.0 x 3.0 mm) | Documentation |
| SLG7NT41204V | 双子座湖RVP. | STQFN-20 (2.0 x 3.0 mm) | Documentation |
| SLG7NT4129V | PCIERTD3. | TDFN-12 (2.5 x 2.5 mm) | Documentation |
| SLG7nt4131v. | PCIERTD3. | TDFN-8 (2.0 x 2.0 mm) | Documentation |
| SLG7nt41382v. | Processor Power Validation | STQFN-20 (2.0 x 3.0 mm) | Documentation |
| SLG7NT41502V | CURIE BASED WEARABLE. Intel application notes on how to resolve a power sequencing failure:Intel® Curie™ Power Sequencing;Intel® Quark™ SE Microcontroller C1000 Power Sequencing Considerations | STQFN-14 (1.6 x 2.0 mm) | Documentation |
| SLG7NT41563V | 雾项目 | STQFN-20 (2.0 x 3.0 mm) | Documentation |
| SLG7NT4180V | Logic Gates | TDFN-12 (2.5 x 2.5 mm) | Documentation |
| SLG7NT4192V | Power Good Generator Logic | TQFN-20（2.0 x 3.0 mm） | Documentation |
| SLG7NT4198V | 1 Hz中断发生器 | TDFN-8 (2.0 x 2.0 mm) | Documentation |
| SLG7NT4204V | Glue Logic | TDFN-12 (2.5 x 2.5 mm) | Documentation |
| SLG7NT4229V | PWROK Generator and Startup Latching Circuit | TDFN-12 (2.5 x 2.5 mm) | Documentation |
| SLG7NT4249V | DISCHARGE, PGOOD MONITOR AND LEVEL SHIFTER | TQFN-20（2.0 x 3.0 mm） | Documentation |
| SLG7NT4317V | Cherry Trail Essentials | TQFN-20（2.0 x 3.0 mm） | Documentation |
| SLG7nt4375v. | SKLAIO | STQFN-12 (1.6 x 1.6 mm) | Documentation |
| SLG7NT4445V | Reset IC with Latch and MUX | TDFN-12 (2.5 x 2.5 mm) | Documentation |
| SLG7NT4503V | 序列序列 | STQFN-20 (2.0 x 3.0 mm) | Documentation |
| SLG7NT4505V | 1 Hz中断发生器 | TDFN-8 (2.0 x 2.0 mm) | Documentation |
| SLG7NT4618V. | APL Power Sequencer | STQFN-20 (2.0 x 3.0 mm) | Documentation |
| SLG7NT4741V | Small Form Factor CRB | STQFN-20 (2.0 x 3.0 mm) | Documentation |
| SLG7NT4774V | ALL_SYS_PWRGD和PCH_PWROK和SYS_PWROK逻辑 | STQFN-20 (2.0 x 3.0 mm) | Documentation |
| SLG7NT4779V | 时钟分频器和芯片选择扩展器 | STQFN-12 (1.6 x 1.6 mm) | Documentation |
| SLG7NT4805V | DPWROK and RSMRST_N Logic | STQFN-20 (2.0 x 3.0 mm) | Documentation |
| SLG7NT4850V | APL Power Sequencer | STQFN-20 (2.0 x 3.0 mm) | Documentation |
| SLG7NT4953V | bat_power_good | STQFN-12 (1.6 x 1.6 mm) | Documentation |
| SLG7NT4964V | DDR_RAIL SEQUENCING | STQFN-12 (1.6 x 1.6 mm) | Documentation |
| SLG7NT614V | Single N-Channel power switch | TDFN-8 (1.5 x 2.0 mm) | Documentation |
Stay connected
Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.
Inquiries 经销商和代表 Register for newslettersOur Partner Network was created to provide consulting services and application support to our clients. Our partners have demonstrated competence in Configurable Mixed-signal products and may help to supplement your own engineering resources.
| Company Name | 描述 | 国家 | Address |
|---|---|---|---|
| Whiz系统 | Please contact Whizz Systems for support regarding Whizz Systems reference designs and evaluation boards. | USA |
3240 Scott Blvd., Santa Clara, 95054, California |
| 黑橡木工程，LLC | 黑橡木工程确实定制设计，快速原型制作和制造。我们专注于各种应用中的模拟，通信，控制，嵌入式，仪器和传感器。雷竞技安卓下载 | USA |
#684, 150 Veterans Mem Hwy, Commack,11725, New York |
| John Battle and Associates | 电子电路设计包括模拟、射频、microwave and digital. Emphasis on communication circuits and systems. Microprocessor and FPGA programming and PC Board design using EAGLE. | USA |
2620 Dove Creek Lane, Suite B, Pasadena, 91107, California |
| Shadwell技术服务 | 应用物理与电子产品咨询。我们专注于解决从污水处理到航空航天的最困难的技术问题。特殊专业领域包括医疗，机器人，人工智能和广泛的物理和化学问题。模拟和数字设计，构建模拟，嵌入式系统和软件的功能原型。 | USA |
3308 Queen Palm Drive, Jacksonville, 32250-2328, Florida |
| 决议工程公司 | Resolution Engineering provides analog/digital, RF, and embedded systems design. Additionally, we offer firmware development, PCB layout and prototyping, and antenna design. Our specialty is the design of devices for wireless control, sensing, and data connectivity. We can assist with small portions of a design program, or provide full turnkey system development. Our experienced engineers can handle projects of virtually any scope or size. | USA |
1402 Heggen St，哈德森，54016，威斯康星州 |
| Pringle Electronics Group | Pringle Electronics Group primarily serves the Embedded Systems related industries providing hardware, software, FPGA and FPGA-SoC design and consulting services. We also provide product design services at the architectural, schematic and PCB design level for all types of systems. | USA |
5530 Sierra Springs Drive，Collock Pines，95726，加利福尼亚州 |
| SEG13, L.L.C. | Embedded system design services. | USA |
13 South Galaxy Drive, Chandler, 85226, Arizona |
| Advanced Bitnology | Expertise in product development, Embedded Systems, Ultra-Low Power, Firmware, Software, Device Drivers. | USA |
469 Cherry Ave, San Bruno, 94066, California |
| Clifford Consulting, Inc. | Embedded design and development group with a wide range of experience. We can assist you in both software and hardware including e.g., digital signal processing, communications, industrial sensors, and medical instruments. Army SBIR Phase II Quality Award; NBS Outstanding Service Award; PSoC Analog Design Contest Winner. | USA |
636伟大的道路，斯托，1775，马萨诸塞州 |
| Frazier Technology | 咨询就是ces in analog and digital systems. Design reviews, cost reductions, printed circuit layout and magnetics. Specializing in all aspects of switching power supplies. Commercial, Industrial and Military | USA |
1600 Bengal Dr., Round Rock, 78664, Texas |
| Ouellette Consulting | 咨询就是ces for analog and digital system design, simulation, fabrication and debugging including embedded, FPGA, mixed-signal PCB, and full-custom mixed-signal ICs. We deliver innovative, robust electronic designs from concept through prototype to production for industrial, commercial, and military applications. We rapidly develop innovative solutions with the highest performance and reliability while avoiding pitfalls. | USA |
43A Groton Harvard Rd。，Ayer，1432，马萨诸塞州 |
| Stratford Digital | Stratford Digital has specialized in embedded electronic design since 2004. We offer project-based design services including both hardware and firmware design. These services include: embedded system design, schematic capture, PCB layout, programmable logic, power supply design, and much, much more. We will find the best technology to fit your needs. | Canada |
4787 Line 42 Perth E., RR1, Sebringville, N0K 1X0, Ontario |
| ADOM Ingenieria | We specialize in professional design, development, support and consulting in analog and digital electronic requirements. | Argentina |
Calle 49 Nro 873 5 A, La Plata, Prov. Buenos Aires |
| Refecor | Refecor is an electronics design and products design company. Refecor has deep knowledge in wireless technologies and skills in production, so the customer can get everything from a prototype phase to a product to the market from Refecor. | Finland |
Isokatu 8A1, Oulu, 90100 |
| Axis3000 Electronic | Axis3000 provides hardware and embedded software consulting and engineering services for industrial applications, with support on all levels from architecture to schematic entry, board-level layout and prototyping up to logic design based on field programmable devices. | Germany |
Kurt-Schumacher Strasse 1, 85221, Dachau |
| EDAXI UG (haftungsbeschraenkt) | Consulting and engineering for Embedded Systems based on microcontrollers, SoC and other programmable logic. | Germany |
Maria-Merian-Str. 6, Monheim am Rhein, 40789 |
| Microlab | Microlab can offer design and consulting services on a broad spectrum of electronic field, both hardware and software. Main advantages and benefits stand in rapid and high quality project development due to experience and knowledge acquired during more than 30 years of activity. Microlab is design partner of various electronic device manufacturers but we can even design using any device our Customer could prefer for any reason such as historical device choice, stock availability, etc.. | Italy |
Via Castiglione dOrcia, 28, Roma, 149 |
| Francesco Not | Francesco Not is an Italian consultant in the Embedded Electronics Engineering field, actively helping customers to turn their Ideas into Products. | Italy |
Via Lobbia 3/B, Mena, 33010 |
| PROTASET LIMITED. | 服务：混合信号硬件设计，PCB布局，固件和嵌入式软件开发，数据和通信安全咨询，项目管理。 | 英国 |
2 Bellevue Road Barnes, SW13 0BJ, London |
| Nooteboom Elektronica | Noothboom Elektronica专注于定制和交钥匙电子工程解决方案。复杂的电子困难为我们带来了解决的挑战。Nooteboom Elektronica获得了20多年的经验和大量满意的客户。 | 荷兰 |
Hoevenstraat 1a, 8161, PP Epe |
| Fuzhou Suntop Elec. co.,Ltd. | Suntop is specialized in the development &design of technology products, including consumer electronics, portable digital products, power tools, communication products etc. And technical services of related field. The promoted products and programs have made great achievements in various fields. There is a powerful R&D and service team of microcontroller software, hardware, power control and management in our company, so we can provide consulting to customer and support program mass production. | 中国 |
2F,13# Building, E District Fuzhou software park, No. 89, Ruanjian main Rd., Fuzhou, Fujian Province |
| Formilab Pty Ltd | Formilab是一个硬件加速器，专注于消费电子和物联网设备的快速原型和短期生产。 | Australia |
5/10吉利斯街，埃塞森州北，3041，维多利亚州 |
| VNPT技术 | VNPT技术is an electronic design and manufacture based in Hanoi. Company is pioneer in the research, development and manufacture of electronics, telecomunication and information technology. Our expertise includes circuit design, writing firmware in C/C++ and assembler, design software in Java, .NET, QT, design Android/iOS App communicating with IoT devices. | Vietnam |
124 Hoang Quoc Viet Street, Cau Giay District, Hanoi Capital City |
| Audesine.com. | Audesine.com.is a boutique electronic design and prototyping firm based in Bangalore, India. We have experience with analog as well as digital designs. | India |
第473号，第19届主要，第35个十字架，Jayanagar 4th'T'块，560 041，班加罗尔 |
| Digital Papaya Inc. | Digital Papaya (DP) is a technical services exporting startup based in Puerto Rico. Founded by a Silicon Valley veteran that knows speed and quality are key, DP offers a low friction click-buy-go model to quickly start your Silego design jobs, and scale your engineering team. | Puerto Rico |
Engine4，Complejo Onofre Carballeira ESQ。PR-2 Con Int。Pr-5，Bayamón，00959 |
| Pensar Development | Pensar provides a full-service product design and development team, including Industrial Design + UI/UX, Mechanical Engineering, Electrical Engineering, and Software/Firmware Engineering for projects ranging from initial design concepts and proof-of-concept prototypes through new product introduction for high-volume production at a contract manufacturer. We cover consumer, medical, professional, industrial, and aerospace market segments, with closely integrated design and engineering. Pensar is skilled with proprietary radio, Wi-Fi, and Bluetooth technology, embedded displays, FPGA, low-power battery operation, capacitive touch sensing, advanced optical sensors, complex mechanisms, thermal analysis and computational fluid dynamics. | USA |
1011 Western Avenue, Suite 1000 Seattle, WA 98104 |
| Indesign，LLC. | Indesign，LLC.is a multi-discipline engineering design firm that provides full turnkey electronic product development to allow clients to get their new product ideas into the market quickly. Indesign offers complete product development capabilities, starting with a product concept and finishing with a ready-to-manufacture design. Indesign has an ISO certified product development process and a proven track record for on-time, on-budget, high quality product realization. Indesign provides specific design engineering services and expertise in electrical design, RF/wireless design, embedded software design, and mechanical design. Indesign also provides engineering services and expertise in a variety of other technical areas including systems engineering, human factors, project management and product validation testing. Indesign engineers can complement a client’s in-house design engineering staff, working in partnership with clients on joint development projects. | USA |
8225 E 56th Street, Indianapolis, IN 46216 |
Stay connected
Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.
Inquiries 经销商和代表 Register for newsletters
Back to results
4 weeks ago
Simple(I thought) Latch issue
Posted byrenegade_of_funk.10点 1回复Hello, I need to latch the input of one of my pins on startup and hold that value to be used for a mux control bit. (its flipping a usb c and rerouting a spi bus)
I cant seem to get the latches working right to just hold the initial value and not change when the initial pin used changes states. ie, I want to use a CS line (starts high) to detect a signal location (my other signals are all low)
Is there a clever way to setup the latch so it grabs the initial value then does not change until a power cycle?
I am developing on the SLG46824.
Thank you.
4 weeks ago
你好，
感谢您与我们联系。如果您使用具有初始极性的锁存器（“1”），则NRST输入应连接到VDD，否则锁存器可能无法工作。同时测试设计，代替仿真模式，请编程芯片并使用测试模式。
如果您有其他问题，请告诉我
亲切的问候
Shivani