Skip to main content

SLG46855-A

Automotive GreenPAK™ Programmable Mixed-signal Matrix

slg46855-a_block_diagram.png

12-GPIO, 4 ACMPs, I2C, 23 LUTs (max.), 8 CNT/DLY (max.), 21 DFF/LATCH (max.) and other Macrocells

The SLG46855-A provides a small, low power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one time programmable (OTP) Non-Volatile Memory (NVM) to configure the interconnect logic, the IO Pins and the macrocells of the SLG46855-A. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.

Macrocells Overview

Two High Speed General Purpose Analog Comparators (ACMPxH);

Two Low Power General Purpose Analog Comparators (ACMPxL);

Two Voltage References (Vref):

  • Two Vref Outputs;

Fifteen Combination Function Macrocells:

  • Three Selectable DFF/Latch or 2-bit LUTs;
  • 一个希利ctable Programmable Pattern Generator or 2-bit LUT;
  • Nine Selectable DFF/Latch or 3-bit LUTs;
  • 一个希利ctable Pipe Delay or Ripple Counter or 3-bit LUT;
  • 一个希利ctable DFF/Latch or 4-bit LUTs;

Eight Multi-Function Macrocells:

  • Seven Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters;
  • 一个希利ctable DFF/Latch or 4-bit LUT + 16-bit Delay/Counter;

Serial Communications:

  • I2C Protocol Interface;

Programmable Delay with Edge Detector Output;

Deglitch过滤器或边缘检测器;

Three Oscillators (OSC):

  • 2.048 kHz Oscillator;
  • 2.048 MHz Oscillator;
  • 25 MHz Oscillator;

Analog Temperature Sensor;

Power-On Reset (POR).

Features

Read Back Protection (Read Lock)

Power Supply:

  • 2.5 V (±8 %) to 5 V (±10 %)

RoHS Compliant / Halogen-Free

TQFN-14 With Wettable Flanks

AEC-Q100 Grade 2

雷竞技安卓下载

In-Vehicle Navigation

Infotainment

Advanced Driver Assistance Systems (ADAS)

Automotive Display Clusters

Body Electronics

Packages and Ordering

SLG46855-AP: FCQFN-14 (3.0 x 3.0 x 0.55 mm, 0.65 mm pitch)

The product ID suffix indicates the package style.

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives Register for newsletters
GreenPAK Designer
Name Date Version
GreenPAK Designer software for Windows, macOS or Linux(7.58 KB)
Datasheets
Name Date Version
SLG46855-A Datasheet(2.38 MB) 26/04/2021 2.9
RoHS and Reach
Name Date Version
Dialog Environmental Statement for IC Products(868.13 KB)
Video thumbnail, click to open and play

GreenPAK Configurable Mixed-signal IC Introduction

Video thumbnail, click to open and play

GreenPAK Designer Software

Video thumbnail, click to open and play

GreenPAK Development Platform

Video thumbnail, click to open and play

Choosing the Right GreenPAK

Video thumbnail, click to open and play

GreenPAK I2C

Video thumbnail, click to open and play

GreenPAK SPICE Introduction

View the full list of the GreenPAK videos in ourTraining Video Library.

Back to results

2 weeks ago

Functional socket test failed SLG46140V

Posted bynickom15 points 3 replies
0 upvotes

Hello,

I am want to experiment with APP note Quadrature Encoder Counter with SPI Bus Interface AN-CM-277

but when I load the SLG46140V into the socket I get Functional socket test failed. Socket issues detected. Can you advise how to resolve this?

Thanks

Attachment Size
socket test fail 131.52 KB

2 weeks ago

ssaravan

Hi,

Thanks for reaching out to us. Could you please check if the IC has been placed correctly in the socket and try again?

Kind Regards

Shivani

2 weeks ago

nickom 15 points

Yes, its placed correctly, I have also tried it with multiple devices but still getting the same problem, it is also saying the device is out of date ? Do these devices have a shelf life?

1 week ago

ssaravan

Hi,

Could you let me know if it shows the chip is out of date or the board? A snapshot of the message from the GPAK designer would also be helpful

Kind Regards

Shivani