Skip to main content

SLG46538-A

Automotive GreenPAK™ Programmable Mixed-signal Matrix with Asynchronous State Machine and Dual supply

slg46538_block-diagram.png

Dual supply, 17-GPIO, 4 ACMPs, 8-State ASM, I2C, 17 LUTS (max.), 7 CNT/DLY (max.), 8 DFF/LATCH (max.) and other Macrocells

The SLG46538-A provides a small, low power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one time Non-Volatile Memory (NVM) to configure the interconnect logic, the I/O Pins and the macro cells of the SLG46538. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit. The additional power supply (VDD2) on the SLG46538 provides the ability to interface two independent voltage domains within the same design. Users can configure pins, dedicated to each power supply, as inputs, outputs, or both (controlled dynamically by internal logic) to both VDD and VDD2 voltage domains. Using the available macro-cells designers can implement mixed-signal functions bridging both domains or simply pass through level-translation in both High to Low and Low to High directions.

Macrocells Overview

Four Analog Comparators (ACMP);

Two Voltage References (Vref);

Nineteen Combination Function Macrocells:

  • Three Selectable DFF/Latch or 2-bit LUTs;
  • One Selectable Continuous DFF/Latch or 3-bit LUT;
  • Four Selectable DFF/Latch or 3-bit LUTs;
  • One Selectable Pipe Delay or 3-bit LUT;
  • One Selectable Programmable Function Generator or 2-bit LUT;
  • Five 8-bit delays/counters or 3-bit LUTs;
  • Two 16-bit delays/counters or 4-bit LUTs;
  • Two Deglitch Filters with Edge Detectors;

State Machine:

  • Eight States;
  • Flexible input logic from state transitions;

Serial Communications:

  • I2C Protocol compliant;

管延迟/ 3 - 16阶段输出(联合的一部分n Function Macrocell);

Programmable Delay;

One Inverter;

Two Oscillators (OSC):

  • Configurable 25 kHz/2 MHz;
  • 25MHz RC Oscillator;

Crystal Oscillator;

Power-On-Reset (POR);

Eight Byte RAM + OTP User Memory:

  • RAM Memory space that is readable and writable via I2C;
  • User defined initial values transferred from OTP.

Features

Logic & Mixed Signal Circuits

Highly Versatile Macrocells

Read Back Protection (Read Lock)

1.8 V (±5%) to 5 V (±10%) VDD

1.8 V (±5%) to 5 V (±10%) VDD2 (VDD2 ≤ VDD)

Operating Temperature Range: -40°C to 85°C

RoHS Compliant / Halogen-Free

AEC-Q100 Grade 1

雷竞技安卓下载

Personal Computers and Servers

PC Peripherals

Consumer Electronics

Data Communications Equipment

Handheld and Portable Electronics

In-Vehicle Navigation

Infotainment

Advanced Driver Assistance Systems (ADAS)

Automotive Display Clusters

Body Electronics

Packages and Ordering

SLG46538-AP: TQFN-20 (3.5 x 3.5 x 0.75 mm, 0.5 mm pitch)

The product ID suffix indicates the package style.

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives Register for newsletters

Contact usfor datasheet

GreenPAK Designer
Name Date Version
GreenPAK Designer software for Windows, macOS or Linux(7.58 KB)
RoHS and Reach
Name Date Version
Dialog Environmental Statement for IC Products(868.13 KB)
Video thumbnail, click to open and play

GreenPAK Configurable Mixed-signal IC Introduction

Video thumbnail, click to open and play

GreenPAK Designer Software

Video thumbnail, click to open and play

GreenPAK Development Platform

Video thumbnail, click to open and play

Choosing the Right GreenPAK

Video thumbnail, click to open and play

GreenPAK I2C

Video thumbnail, click to open and play

GreenPAK SPICE Introduction

Video thumbnail, click to open and play

GreenPAK's Asynchronous State Machine

Video thumbnail, click to open and play

Asynchronous State Machine vs MCU

View the full list of the GreenPAK videos in ourTraining Video Library.

This product is available in one package:

SLG46538-AV: TQFN-20 (3.5 x 3.5 x 0.75 mm, 0.5 mm pitch)


Development board selector

GreenPAK Development Board

Provides full programming, emulation and testing functions for GreenPAK devices. For use with SLG46xxxX-SKT sockets kits.

Working in tandem with the GreenPAK Designer software, GreenPAK Advanced Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Develop using any GreenPAK device
Suitable for:
  • Programming
  • Emulation
  • Signal and Logic Generators
Features:
  • USB interface
  • MacOS, Windows and Linux compatible
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
  • Integrated signal and logic generators
  • LEDs for visual indication
SLG4DVKADV
$59.00
Recommended add-on:
SLG46538AP-SKT
This item is out of stock.
$0.00
DIP

Perfect for breadboarding and fast prototypes.

Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
Suitable for:
  • Programming
  • Emulation
Features:
  • USB interface
  • MacOS, Windows and Linux compatible
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
GreenPAK DIP Development Board
$24.99
GreenPAK Pro Development Platform

Provides advanced emulation and testing functions for select GreenPAK devices.

Working in tandem with the GreenPAK Designer software, GreenPAK Pro Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Develop using select GreenPAK device
Suitable for:
  • Programming
  • Emulation
  • Signal and Logic Generators
  • High Speed Signal and Logic Generators
  • Logic Analyzer**
Features:
  • USB interface
  • MacOS, Windows and Linux compatible
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
  • Integrated high speed signal and logic generators

**This feature is not available at the moment and will be added through the software update

GreenPAK Pro Development Board
$349.99
GreenPAK Development Board

GreenPAK Advanced Development Board

Provides full programming, emulation and testing functions for GreenPAK devices.
  • Programming
  • Emulation
  • Signal and Logic Generators
SLG4DVKADV
$59.00
Recommended add-on:
SLG46169V-SKT
$35.00
DIP

GreenPAK DIP Development Board

Perfect for breadboarding and fast prototypes.

Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Programming
  • Emulation
GreenPAK DIP Development Board
$24.99
GreenPAK Pro Development Platform

GreenPAK Pro Development Board

Provides advanced emulation and testing functions for select GreenPAK devices.

Working in tandem with the GreenPAK Designer software, GreenPAK Pro Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Develop using select GreenPAK device
  • Programming
  • Emulation
  • Signal and Logic Generators
  • High Speed Signal and Logic Generators
  • Logic Analyzer**
GreenPAK Pro Development Board
$349.99
Recommended add-on:
SLG46585M-SKT
$35.00

其他组件

TQFN20-n6

Included are: SLG4SA20-35x35 socket adapter, 50 SLG46538-AP samples.

This part is not being sold yet.Contact Usto Order Free samples.

SLG46538AP-SKT
This item is out of stock.
$0.00
Back to results

2 weeks ago

Functional socket test failed SLG46140V

Posted bynickom15 points 3 replies
0 upvotes

Hello,

I am want to experiment with APP note Quadrature Encoder Counter with SPI Bus Interface AN-CM-277

but when I load the SLG46140V into the socket I get Functional socket test failed. Socket issues detected. Can you advise how to resolve this?

Thanks

Attachment 大小
socket test fail 131.52 KB

2 weeks ago

ssaravan

Hi,

Thanks for reaching out to us. Could you please check if the IC has been placed correctly in the socket and try again?

Kind Regards

Shivani

2 weeks ago

nickom 15 points

Yes, its placed correctly, I have also tried it with multiple devices but still getting the same problem, it is also saying the device is out of date ? Do these devices have a shelf life?

2 weeks ago

ssaravan

Hi,

Could you let me know if it shows the chip is out of date or the board? A snapshot of the message from the GPAK designer would also be helpful

Kind Regards

Shivani